Search GDR Data

Thermoelectric Materials Development for Low Temperature Geothermal Power Generation

Data includes characterization results for novel thermoelectric materials developed specifically for power generation from low temperature geothermal brines. Materials characterization data includes material density, thickness, resistance, Seebeck coefficient. This research was ca...

Hansen, T. Southern Research Institute

Jan 29, 2016
3 Resources
0 Stars
Publicly accessible

Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project

The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes....

Feigl, K. and PoroTomo Team, . University of Wisconsin

Mar 06, 2019
10 Resources
0 Stars
Publicly accessible

Alternative Geothermal Power Production Scenarios

The information given in this file pertains to Argonne life-cycle analyses (LCAs) of the plant cycle stage for a set of ten new geothermal scenario pairs, each comprised of a reference and improved case. These analyses were conducted to compare environmental performances among the...

Sullivan, J. Argonne National Laboratory

Mar 14, 2014
1 Resources
1 Stars
Publicly accessible

Processed Lab Data for Neural Network-Based Shear Stress Level Prediction

Machine learning can be used to predict fault properties such as shear stress, friction, and time to failure using continuous records of fault zone acoustic emissions. The files are extracted features and labels from lab data (experiment p4679). The features are extracted with a n...

Marone, C. et al Pennsylvania State University

May 14, 2021
3 Resources
0 Stars
Publicly accessible

Lost Circulation Materials in Geothermal Drilling: Thermal Degradation, Viscosity, Compression, and Flow Loop Tests

This dataset provides a set of experimental data on the performance of lost circulation materials (LCMs) used in geothermal drilling operations. It includes results from four distinct tests: thermal degradation, viscosity measurements, compression tests, and high-temperature flow ...

Kibikas, W. et al Sandia National Laboratories

Feb 01, 2022
9 Resources
0 Stars
Publicly accessible

COMSOL Models and Simulation Results for Closed-Loop Geothermal Systems with Thermal Enhancements

The Closed-Loop Geothermal Working Group and the National Renewable Energy Laboratory (NREL) have studied the performance of disc-shaped and linear thermal enhancements (conductive material introduced around a wellbore) in closed-loop geothermal systems. COMSOL models were develop...

Beckers, K. et al National Renewable Energy Laboratory

Dec 15, 2023
4 Resources
1 Stars
Publicly accessible

Newberry FORGE: 3D Gravity Density Model for Newberry Volcano

These data are Pacific Northwest National Lab inversions of an amalgamation of two surface gravity datasets: Davenport-Newberry gravity collected prior to 2012 stimulations and Zonge International gravity collected for the project "Novel use of 4D Monitoring Techniques to Improve...

Bonneville, A. Pacific Northwest National Laboratory

Mar 11, 2016
1 Resources
0 Stars
Publicly accessible

Purdue University: Results of B-Value Tests for Rock Saturation

This dataset includes an Excel file with the results of B-value tests to determine the magnitude of the back pressure required for full saturation of Sierra White granite samples. Test were conducted on cylindrical rock specimens of Sierra White granite in a custom water pressuriz...

Han, K. et al Purdue University

Jun 20, 2022
2 Resources
0 Stars
Publicly accessible

Hawaii Play Fairway Analysis: Lanai Resistivity and Density 3D Inversion Models

To prepare for its third phase, the Hawaii Play Fairway project conducted groundwater sampling and analyses in ten locations in the Hawaiian islands, magnetotelluric (MT) and gravity surveys, as well as calculations of 3D subsurface stress due to the weight of the rock underlying ...

Lautze, N. et al University of Hawaii

Jun 01, 2020
3 Resources
0 Stars
Publicly accessible

Snake River Plain FORGE: Well Data for WO-2

Well data for the WO-2 well located in eastern Snake River Plain, Idaho. This data collection includes lithology reports, borehole logs, temperature at depth data, neutron density and gamma data, and rock strength parameters for the WO-2 well. This collection of data has been ass...

Podgorney, R. Idaho National Laboratory

Jul 29, 1991
9 Resources
0 Stars
Publicly accessible

Testing LCM on a Large Scale for Geothermal Drilling Applications Using a Novel Experimental Setup

Rheology data obtained from flow loop tests, performed using different lost circulation materials (LCM) to study their effect on fluid rheology and wellbore hydraulics. The sealing performance of different LCM was tested using different fracture sizes. Five academic papers / repor...

Mohamed, A. et al University of Oklahoma

Apr 22, 2022
10 Resources
0 Stars
Publicly accessible

Snake River Plain FORGE: Well Data for INEL-1

Well data for the INEL-1 well located in eastern Snake River Plain, Idaho. This data collection includes caliper logs, lithology reports, borehole logs, temperature at depth data, neutron density and gamma data, full color logs, fracture analysis, photos, and rock strength paramet...

Prestwich, S. and Bowman, J. Idaho National Laboratory

Mar 01, 1979
34 Resources
0 Stars
Publicly accessible

EGS Collab: 3D Geophysical Model Around the Sanford Underground Research Facility

This package contains data associated with a proceedings paper (linked below) submitted to the 44th Workshop on Geothermal Reservoir Engineering. The Geophysical Model text file contains density, P and S-wave seismic speeds on a 3D grid. The file has six columns and provides latit...

Chai, C. et al Lawrence Berkeley National Laboratory

Feb 06, 2019
3 Resources
0 Stars
Publicly accessible

Life Cycle Analysis Data and Results for Geothermal and Other Electricity Generation Technologies

Life cycle analysis (LCA) is an environmental assessment method that quantifies the environmental performance of a product system over its entire lifetime, from cradle to grave. Based on a set of relevant metrics, the method is aptly suited for comparing the environmental performa...

Sullivan, J. Argonne National Laboratory

Jun 04, 2013
1 Resources
1 Stars
Publicly accessible

Community Resilience through Low-Temperature Geothermal Reservoir Thermal Energy Storage

Submitted data include simulations related to underground thermal battery (UTB) simulations described in Modeling and efficiency study of large scale underground thermal battery deployment, presented at GRC, October 2021. The UTB is comprised of a tank of water, a helical heat ex...

Nico, P. et al Lawrence Berkeley National Laboratory

Jan 29, 2022
4 Resources
0 Stars
Publicly accessible

Calculation Tool for Transported Geothermal Energy Using Two-Step Absorption Process

This spreadsheet allows the user to calculate parameters relevant to techno-economic performance of a two-step absorption process to transport low temperature geothermal heat some distance (1-20 miles) for use in building air conditioning. The parameters included are (1) energy de...

Liu, X. et al Oak Ridge National Laboratory

Feb 01, 2016
2 Resources
0 Stars
Publicly accessible

High-Pressure and High-Temperature (HPHT) Lost Circulation Material (LCM) Testing

High-pressure and high-temperature (HPHT) lost circulation material (LCM) rheology test results, LCM particle size distributions (PSD) analysis, and HPHT LCM fluid loss test results. Three academic papers / reports derived from this research are also presented.

Salehi, S. and Vivas, C. University of Oklahoma

Nov 30, 2021
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 56-32 Sludge XRF

This is an Excel spreadsheet containing the results of X-ray fluorescence from well 56-32 sludge samples. The instrumentation used was a Olympus Vanta M series handheld XRF analyzer. A glass (SiO2) "blank" was analyzed at the beginning and end of each sample batch to detect contam...

Smith, K. Utah Geological Survey

Jul 15, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Rock Properties

This is an Excel spreadsheet that contains rock properties from several wells in the Utah FORGE study area. This includes a map of the wells. Data is described in the Final Topical Report included in the resources below.

Gwynn, M. Energy and Geoscience Institute at the University of Utah

Apr 07, 2018
2 Resources
0 Stars
Publicly accessible

DEEPEN: Newberry Volcano MT and Gravity Data 2022 and 2023 Acquisition and Processing

As part of DEEPEN (DE-risking Exploration of geothermal Plays in magmatic ENvironments), a 3D play fairway analysis (PFA) was conducted at Newberry Volcano in Central Oregon for multiple play types (conventional hydrothermal, superhot EGS, and supercritical). For use in this PFA, ...

Shultz, A. et al Enthalpion Energy

Jun 30, 2023
8 Resources
0 Stars
Publicly accessible

Strengthening Effects of Surface Chemistry on the Consolidation of Silicate-Based Geomaterials Experimental Data

The data includes scanning electron microscope images along with experimental data. All experiments were conducted at Sandia National Laboratories, Albuquerque, New Mexico. Work was supported by the Sandia National Laboratories Laboratory Directed Research and Development program....

Choens, R. et al Sandia National Laboratories

Jun 21, 2024
5 Resources
0 Stars
In curation

Utah FORGE: Well 56-32 Drilling Data and Logs

This dataset consists of drilling data (Pason data spreadsheets, daily reports, days v. depth, mud logs), Schlumberger logs (FMI, shear anisotropy analysis, memory, sonic, array induction/spectral density/dual spaced neutron/gamma ray/caliper, spectral GR/temperature, and Gardner ...

Bristol, J. et al Energy and Geoscience Institute at the University of Utah

Mar 19, 2021
18 Resources
0 Stars
Publicly accessible

Effective Elastic and Neutron Capture Cross Section Calculations Corresponding to Simulated Fluid Properties from CO2 Push-Pull Simulations

The submission contains a .xls files consisting of 10 excel sheets, which contain combined list of pressure, saturation, salinity, temperature profiles from the simulation of CO2 push-pull using Brady reservoir model and the corresponding effective compressional and shear velocity...

Chugunov, N. and Altundas, B. Lawrence Berkeley National Laboratory

Mar 07, 2018
1 Resources
0 Stars
Publicly accessible

Cape EGS: Gold 4-PB: Mudlog, Mass spectrometry, Triple combo, and Dipole sonic-derived geomechanical data

1. Mudlogs Mudlogs provide lithological information based on the analysis of drill cuttings and observed drilling parameters. These logs allow for the identification of formation changes, rock types, and basic mineral composition. They offer a continuous lithostratigraphic record ...

Dadi, S. and Adams, T. Fervo Energy

Apr 30, 2025
6 Resources
0 Stars
Awaiting curation

Techno-Economic Assessment for Integrating Biosorption into Rare Earth Recovery Process

The current uncertainty in the global supply of rare earth elements (REEs) necessitates the development of novel extraction technologies that utilize a variety of REE source materials. Herein, we examined the techno-economic performance of integrating a biosorption approach into ...

Jiao, Y. et al Lawrence Livermore National Laboratory

Jul 01, 2017
1 Resources
0 Stars
Publicly accessible

1 2 3 Next >>