Search GDR Data
Showing results 1 - 25 of 595.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
The project provides an updated Energy Return on Investment (EROI) for Enhanced Geothermal Systems (EGS). Results incorporate Argonne National Laboratory's Life Cycle Assessment and base case assumptions consistent with other projects in the Analysis subprogram.
EROI is a ratio o...
Wells for Engineered Geothermal Systems (EGS) typically occur in conditions presenting significant challenges for conventional rotary and percussive drilling technologies: granitic rocks that reduce drilling speeds and cause substantial equipment wear. Thermal spallation drilling,...
The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration...
The evolution of flow pattern along a single fracture and its effects on heat production is a fundamental problem in the assessments of engineered geothermal systems (EGS). The channelized flow pattern associated with ubiquitous heterogeneity in fracture aperture distribution caus...
Low permeability geothermal reservoirs can be stimulated by hydraulic fracturing to create Enhanced (or Engineered) Geothermal Systems (EGS) with higher permeability and improved heat transfer to increase heat production. In this paper, we document our effort to develop a numerica...
This dataset contains non-isothermal thermogravimetric analysis (TGA) results for ten ionic liquids. The tests were performed using a TGA 5500 system under an air atmosphere, with platinum pans and a 10 Hz sampling rate. Each test includes multiple thermal segments, typically invo...
The U.S. Department of Energy Geothermal Vision (GeoVision) Study is currently looking at the potential to increase geothermal deployment in the U.S. and to understand the impact of this increased deployment. This paper reviews 31 performance, cost, and financial parameters as inp...
This dataset contains thermohydraulic measurements of fluid flow through single and dual fracture systems under controlled laboratory conditions. Experiments were conducted at Oklahoma State University using various ionic and nonionic fluids, including deep eutectic solvents (DES)...
Methods and results of the Kinetics of Chlorite Dissolution at Elevated Temperatures and CO2 Conditions are described and discussed in the paper. Data from this experiment is included as a downloadable .xlsx spreadsheet in the linked GDR submission.
Chlorite dissolution kinetics w...
These resources describe the 3D geophysical inversion modeling of gravity data at the FORGE site near Milford, Utah. FORGE is the Frontier Observatory for Research in Geothermal Energy and the site in Utah has been selected by the U.S. Dept. of Energy for a 5-year R&D program to t...
We summarized the FY17 and part of FY18 results of the analysis of the effect of several parameters (e.g., total dissolved solids, specific competing metals, pH, and temperature) on REE recovery from geothermal brine in a manuscript that was submitted to Environmental Science & Te...
This submission includes the final project report of the Snake River Plain Play Fairway Analysis project as well as a separate appendix for the final report. The final report outlines the application of Play Fairway Analysis (PFA) to geothermal exploration, specifically within the...
Widespread adoption of geothermal energy will require access to deeply buried resources in granitic basement rocks at high temperatures and pressures. Exploiting these resources necessitates novel methods for drilling, stimulation, and maintenance, under operating conditions that ...
The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The overall project area is 2500km2 with the Calibration Area (Dixie Valley Geothermal Wellfield) being about 170km2....
This is a presentation on Designing, Characterizing & Optimizing Proppant & Flow Monitoring Materials for a Utah FORGE Engineered Geothermal System by Oklahoma State University, presented by Dr. Mileva Radonjic. This video slide presentation discusses enhanced proppant coatings, z...
The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 1...
Lanthanide binding tags (LBTs) have been engineered onto native Escherichia coli (E. coli) bacterial surfaces to enhance extraction and recovery of rare earth elements (REEs). Three strains of E. coli were studied: (1) the native E. coli surface, (2) a mutant E. coli surface with ...
Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations: An Approach to Improve Energy Recovery and Mitigate Risk: FY1 Final Report
The purpose of phase 1 is to determine the feasibility of integrating geologic CO2 storage (GCS) with geothermal ...
This dataset includes the data and a report on the large upscaled discrete fracture network modeling done for the Utah FORGE project in 2023. The FORGE modeling team is making five discrete fracture network (DFN) realizations of a large reservoir model available to researchers. Th...
Compilation of data (spreadsheet and shapefiles) for several low-temperature resource types, including isolated springs and wells, delineated area convection systems, sedimentary basins and coastal plains sedimentary systems. For each system, we include estimates of the accessible...
Exploration of geothermal systems is commonly hampered by the risk of unsuccessful drilling. A major problem in selecting well sites is that the favorable settings of known systems are generally not adequately characterized. This is particularly important in amagmatic regions, wh...
We are conducting an inventory of structural settings of geothermal systems (>400 total) in the extensional to transtensional Great Basin region of the western USA. A system of NW-striking dextral faults known as the Walker Lane accommodates ~20% of the North American-Pacific plat...
Final research performance report for an electronics platform and temperature sensor system for enhanced geothermal systems (EGS) capable of 300 degrees Celcius.
In 2010 and 2011, Flint Geothermal commissioned CIRES from the University of Colorado to attempt to detect "blind" or buried geothermal systems using remote sensing. CIRES utilized thermal infrared bands from ASTER and LANDSAT satellite imagery to detect areas of warm ground in pa...
This contains a final technical report and closeout presentation recording summarizing the results from Utah FORGE Project 5-2557 on the role of fluid pressure and temperature in fracture mechanics and coupled thermo-hydro-mechanical-chemical (THMC) processes relevant to enhanced ...
Google Map