Search GDR Data

Utah FORGE: Area Terrain Slope Data

This archive contains a terrain slope image, in units of degrees, of the Utah FORGE area near Roosevelt Hot springs. The data was derived from 0.5 m resolution LiDAR DEM data and is in a GeoTiff format. It was processed using ArcGIS.

Nash, G. Energy and Geoscience Institute at the University of Utah

Dec 10, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: InSAR Data Best Pairs

This submission provides Interferometric Synthetic Aperture Radar (InSAR) data covering the Utah FORGE site via the TerraSAR-X and TanDEM-X satellite missions operated by the German Space Agency (DLR). Data was collected between 2019/01/01 and 2023/06/30. Interferometric pairs (...

Batzli, S. and Feigl, K. University of Wisconsin Madison

May 31, 2023
11 Resources
0 Stars
Publicly accessible

Utah FORGE: Interferometric Synthetic Aperture Radar Data from 2023 and 2024

The dataset comprises Interferometric Synthetic Aperture Radar (InSAR) data from the TerraSAR-X and TanDEM-X satellite missions, covering the Utah FORGE site. This data includes interferometric pairs created using GMT-SAR processing software, chosen for their short orbital separat...

Batzli, S. and Feigl, K. University of Wisconsin Madison

Jul 17, 2024
10 Resources
0 Stars
Publicly accessible

Utah FORGE: Leapfrog 3D Geologic Movie

This is a 3D geological movie of the Utah FORGE area created with Leapfrog Geothermal 3D modelling software. The movie shows the Utah FORGE site, wells, seismic and lithologic cross-sections, and rock unit tops. This illustrates the thick crystalline granitoid EGS reservoir.

Podgorney, R. Energy and Geoscience Institute at the University of Utah

May 18, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: TEM and Gravity Data

This submission includes a gravity data in text format and as a GIS point shapefile and transient electromagnetic (TEM) raw data. Each text file additionally contains location data (UTM Zone 12, NAD83) and elevation (meters) data for that station. The gravity data shapefile was i...

Hardwick, C. and Nash, G. Energy and Geoscience Institute at the University of Utah

Feb 05, 2018
3 Resources
0 Stars
Publicly accessible

Utah FORGE: GIS Well Temperature Data

This is a GIS point feature shapefile representing wells, and their temperatures, that are located in the general Utah FORGE area near Milford, Utah. There are also fields that represent interpolated temperature values at depths of 200 m, 1000 m, 2000 m, 3000 m, and 4000 m. in deg...

Gwynn, M. et al Energy and Geoscience Institute at the University of Utah

Feb 28, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3A Year 1 Annual Report for 2020

This is the Utah FORGE annual report for Phase 3A year 1, which was completed on December 28th, 2020. This report includes site infrastructure, site operations, seismic monitoring, a conceptual geological model, outreach, and communications for the Utah FORGE project during Phase ...

Moore, J. et al Energy and Geoscience Institute at the University of Utah

Dec 28, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2404: Determination of Reservoir-Scale Stress State Presentation Slides

This PowerPoint summarizes the integration of multiple approaches and data to constrain wellbore stress models at Utah FORGE. This stress determination used faulting theory, breakouts, and drilling-induced cracks detected in image logs. Wellbore stress profiles were established f...

Ghassemi, A. et al The University of Oklahoma

Jul 31, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE: LBNL Reports on VEMP Electromagnetic Data Collection and Processing 2024

This archive contains reports related to Vertical Electromagnetic Profiling (VEMP) tool data collection and processing at Utah FORGE in 2024. The first report describes LBNL's effort to collect electromagnetic geophysical data with the tool in well 78-32B and a downhole electrode ...

Alumbaugh, D. et al Los Alamos National Laboratory

Mar 02, 2025
1 Resources
0 Stars
Publicly accessible

Utah FORGE: InSAR Data 2019

This dataset contains Interferometric Synthetic Aperture Radar (InSAR) data used for ground deformation monitoring during Phase 2C of the Utah FORGE project. The dataset includes measurements of the mean rate of range change and associated standard errors, provided in both CSV and...

Feigl, K. et al Energy and Geoscience Institute at the University of Utah

Jul 01, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Discrete Fracture Network (DFN) Data

The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 1...

Finnila, A. and Podgorney, R. Golder Associates Inc.

Jun 24, 2020
66 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Simplified Discrete Fracture Network Data

Finnila, A. Golder Associates Inc.

Jun 01, 2021
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Slide-Hold-Slide Experiments on Gneiss at Increased Temperature

Included are data from triaxial, single-inclined-fracture friction experiments. The experiments were performed with slide-hold-slide protocol on Utah FORGE gneiss at increased temperature. With a ~10 MPa normal stress, temperatures vary between experiments from room temperature u...

Eijsink, A. and Elsworth, D. Pennsylvania State University

Jul 25, 2023
24 Resources
0 Stars
Publicly accessible

Utah FORGE: Development of Multi-Stage Fracturing System and Wellbore Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores

This paper discusses the progress on a project funded by the DOE Utah FORGE (Frontier Observatory for Research in Geothermal Energy) for the development of a subsurface heat exchanger for Enhanced Geothermal Systems (EGS) using unique casing sleeves cemented in place and are used ...

Fleckenstein, W. et al Colorado School of Mines

Oct 05, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Machine Learning for Well 16A(78)-32 Stress Predictions September 2023 Report

This task completion report documents the development and implementation of machine learning (ML) models for the prediction of in-situ vertical (Sv), minimum horizontal (SHmin) and maximum horizontal (SHmax) stresses in well 16A(78)-32. The detailed description of the experimental...

Mustafa, A. et al Battelle Memorial Institute

Sep 28, 2023
3 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: A Multi-Component Approach to Characterizing In-Situ Stress

Core-based in-situ stress estimation, Triaxial Ultrasonic Velocity (labTUV) data, and Deformation Rate Analysis (DRA) data for Utah FORGE well 16A(78)-32 using triaxial ultrasonic velocity and deformation rate analysis. Report documenting a multi-component approach to characterizi...

Bunger, A. et al Battelle Memorial Institute

Dec 13, 2022
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Stimulation Data

Pressure, temperature, and flow data from open-hole, upper perforation, and lower perforation well stimulations gathered from various tools collected at well 58-32 during phase 2C.

Best, S. Geothermal Resource Group

Apr 20, 2019
16 Resources
0 Stars
Publicly accessible

Cape EGS: Frisco Pad Wells Flow Test Microseismic Data

This dataset contains microseismic data acquired during the Frisco pad flow test project led by Fervo Energy, conducted between July 17th Aug 12th 2024, near the Utah FORGE geothermal site. The microseismic data was collected from various Utah FORGE wells: via Distributed Acoustic...

Dadi, S. and Kanu, O. Fervo Energy

Nov 06, 2024
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Logs

This dataset contains all well logs from Utah FORGE well 16A(78)-32. This includes the mud log, Sanvean Technologies logs, and Schlumberger logs. Please see the file descriptions below for information about each log.

Gilmour, B. et al Energy and Geoscience Institute at the University of Utah

Mar 08, 2021
7 Resources
0 Stars
Publicly accessible

Utah FORGE: Southwestern Utah Magnetotelluric (MT) Data

This comprehensive magnetotellurics (MT) dataset, which covers southwestern Utah, integrates 600 sites from various surveys, including those from the Utah FORGE, SubTER, and Play Fairway projects, all of which are linked below. The core of this dataset is the use of a 3D finite el...

Wannamaker, P. and Marris, V. Energy and Geoscience Institute at the University of Utah

Jan 22, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Fluid Injection Induced Shearing Experiments on Fractured Granitoid at Elevated Temperatures

This repository contains experimental data from a series of fluid injection-induced shearing tests conducted on Utah FORGE granitoid. The experiments were performed using an aluminum triaxial pressure vessel (TEMCO) apparatus at Pennsylvania State University. The primary aim was t...

Elsworth, D. et al Pennsylvania State University

Aug 12, 2024
16 Resources
0 Stars
Publicly accessible

Utah FORGE: 2D and 3D Seismic Data

This set of data contains raw and Initially-processed 2D and 3D seismic data from the Utah FORGE study area near Roosevelt Hot Springs. Reprocessed versions of these data can be accessed at the linked submission in the Resources section titled "Reprocessed Seismic Reflection Data....

Miller, J. Energy and Geoscience Institute at the University of Utah

Mar 16, 2018
21 Resources
0 Stars
Publicly accessible

Cape EGS: Frisco 2-P Well Stimulation Microseismic Data

This dataset contains microseismic data acquired during the Frisco 2-P well stimulation project led by Fervo Energy, conducted between June 1 and June 11, 2024, near the Utah FORGE geothermal site. The microseismic data was collected from various Utah FORGE wells: via Distributed ...

Dadi, S. and Titov, A. Fervo Energy

Sep 19, 2024
26 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6