Search GDR Data

Utah FORGE: Evaluation of Potential Geochemical Responses to Injection in the FORGE Geothermal Reservoir

Plugging of fracture porosity from mineral precipitation due to injecting cold water into a a geothermal reservoir can impact the overall permeability of the fracture network in the reservoir. This can have serious ramifications on the efficiency of the geothermal resource. Geoche...

Patil, V. and Simmons, S. Energy and Geoscience Institute at the University of Utah

Apr 03, 2019
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: A Multi-Component Approach to Characterizing In-Situ Stress

Core-based in-situ stress estimation, Triaxial Ultrasonic Velocity (labTUV) data, and Deformation Rate Analysis (DRA) data for Utah FORGE well 16A(78)-32 using triaxial ultrasonic velocity and deformation rate analysis. Report documenting a multi-component approach to characterizi...

Bunger, A. et al Battelle Memorial Institute

Dec 13, 2022
4 Resources
0 Stars
Curated

Utah FORGE: Phase 3A, Year 2, Annual Report

This is the annual report for Utah FORGE Phase 3A, year two, which was published on July 28th, 2022. The report includes site infrastructure, site operations, seismic monitoring reports, FORGE modeling reports, and external research and design. The ultimate objective of Utah FORGE...

Moore, J. et al Energy and Geoscience Institute at the University of Utah

Jul 29, 2022
1 Resources
0 Stars
Curated

Utah FORGE: Milford Site Location, Seismometer Locations, Basin Depth Models, and Potentiometric Contours

This submission includes the geographic extent shapefile of the Milford FORGE site located in Utah, along with a shapefile of seismometer positions throughout the area, and models of basin depth and potentiometric contours.

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 09, 2016
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Leapfrog 3D Geologic Movie

This is a 3D geological movie of the Utah FORGE area created with Leapfrog Geothermal 3D modelling software. The movie shows the Utah FORGE site, wells, seismic and lithologic cross-sections, and rock unit tops. This illustrates the thick crystalline granitoid EGS reservoir.

Podgorney, R. Energy and Geoscience Institute at the University of Utah

May 18, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439: A Multi-Component Approach to Characterizing In-Situ Stress: Laboratory, Modeling and Field Measurement Workshop Presentation

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement project by Battelle [Columbus, OH], presented by Mark Kelley. The project's objective was to characterize stress in the U...

Kelley, M. and Bunger, A. Battelle Memorial Institute

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 2024 Discrete Fracture Network Model Data

The Utah FORGE 2024 Discrete Fracture Network (DFN) Model dataset provides a set of files representing discrete fracture network modeling for the FORGE site near Milford, Utah. The dataset includes four distinct DFN model file sets, each corresponding to different time frames and ...

Finnila, A. and Jones, C. Energy and Geoscience Institute at the University of Utah

Sep 08, 2024
5 Resources
0 Stars
Curated

Washington Geothermal Play Fairway Analysis Heat, Permeability, and Fracture Model Data

This submission contains raster and vector data for the entire state of Washington, with specific emphasis on the three geothermal play fairway sites: Mount St. Helens seismic zone (MSHSZ), Wind River valley (WRV), and Mount Baker (MB). Data are provided for 3 major geothermal mo...

Steely, A. et al Washington Geological Survey

Dec 07, 2017
9 Resources
0 Stars
Publicly accessible

Sedimentary Geothermal Feasibility in Nevada, Western Utah, Colorado, and the Gulf Coast Region of Texas Final Report

The objectives of this project were to (1) perform a literature review of sedimentary geothermal resources, (2) identify data sources and develop data-collection methodologies that characterize selected resources, (3) screen sedimentary basins and formations for sedimentary geothe...

Johnston, H. et al National Renewable Energy Laboratory

Jul 01, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Stimulation DFN Fracture Plane Evaluation and Data

This dataset includes files used to fit planar fractures through the preliminary earthquake catalogs of the three stages of the April 2022 well 16A(78)-32 stimulation which is linked bellow. These planar features have been used to update the FORGE reference Discrete Fracture Netwo...

Finnila, A. WSP Golder

Oct 27, 2022
3 Resources
0 Stars
Curated

Utah FORGE 2-2446: Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity Workshop Presentation

This is a presentation on the Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity project by Lawrence Livermore National Laboratory, presented by Dr. Matteo Cusini. The project's objective was to employ a combination of high-fidelity simulations and true...

Cusini, M. and Bunger, A. Lawrence Livermore National Laboratory

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase Native State FALCON Model Files

The submission includes FALCON input file and mesh for the an initial pressure-temperature simulation, and a second set for pressure-temperature-displacement simulation. All simulations are steady state. Data and input for the FORGE Phase 2 native state model were compiled from hi...

Podgorney, R. Idaho National Laboratory

Jun 06, 2019
2 Resources
0 Stars
Curated

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Curated

Utah FORGE 5-2428: Coupled Investigation of Fracture Permeability Impact on Reservoir Stress and Seismic Slip 2024 Annual Workshop Presentation

This is a presentation on the Coupled Investigation of Fracture Permeability Impact on Reservoir Stress and Seismic Slip Behavior by Lawrence Livermore National Laboratory, presented by Kayla Kroll. This presentation addresses testing and modelling related to the dependency of EG...

Kroll, K. et al Energy and Geoscience Institute at the University of Utah

Aug 27, 2024
1 Resources
0 Stars
Curated

Utah FORGE 2439: Machine Learning for Well 16A(78)-32 Stress Predictions September 2023 Report

This task completion report documents the development and implementation of machine learning (ML) models for the prediction of in-situ vertical (Sv), minimum horizontal (SHmin) and maximum horizontal (SHmax) stresses in well 16A(78)-32. The detailed description of the experimental...

Mustafa, A. et al Battelle Memorial Institute

Sep 28, 2023
3 Resources
0 Stars
Curated

Utah FORGE 3-2417: Simulations for Distributed Acoustic Sensing Strain Signatures as an Indicator of Fracture Connectivity

This dataset encompasses simulations of strain signatures from both hydraulically connected and "near-miss" fractures in enhanced geothermal systems (EGS). The files and results are presented from the perspective of digital acoustic sensing's (DAS) potential to differentiate the t...

Ward-Baranyay, M. et al Rice University

Jan 01, 2023
4 Resources
0 Stars
Curated

Tularosa Basin Play Fairway: Weights of Evidence Models

These models are related to weights of evidence play fairway anlaysis of the Tularosa Basin, New Mexico and Texas. They were created through Spatial Data Modeler: ArcMAP 9.3 geoprocessing tools for spatial data modeling using weights of evidence, logistic regression, fuzzy logic a...

Brandt, A. University of Utah

Dec 01, 2015
2 Resources
0 Stars
Publicly accessible

Deep Sedimentary Basin EGS Development

Stratigraphic reservoirs with high permeability and temperature at economically accessible depths are attractive for power generation because of their large areal extent (> 100 km2) compared to the fault controlled hydrothermal reservoirs (< 10 km2) found throughout much of the we...

Allis, R. and Moore, J. University of Utah

Jan 24, 2013
1 Resources
0 Stars
Publicly accessible

Basin and Range Investigation for Developing Geothermal Energy: Exploration Data

This data package includes exploration material from the Basin & Range Investigation for Developing Geothermal Energy [in Hidden Systems] project (BRIDGE), which is part of a broader initiative to advance the exploration of hidden geothermal resources in the Basin & Range Province...

Schwering, P. et al Sandia National Laboratories

Jan 03, 2022
11 Resources
1 Stars
Curated

Utah FORGE: 2023 Large Upscaled Discrete Fracture Network Models

This dataset includes the data and a report on the large upscaled discrete fracture network modeling done for the Utah FORGE project in 2023. The FORGE modeling team is making five discrete fracture network (DFN) realizations of a large reservoir model available to researchers. Th...

Finnila, A. Energy and Geoscience Institute at the University of Utah

Oct 02, 2023
17 Resources
0 Stars
Publicly accessible

Snake River Plain FORGE: Site Characterization Data

The site characterization data used to develop the conceptual geologic model for the Snake River Plain site in Idaho, as part of phase 1 of the Frontier Observatory for Research in Geothermal Energy (FORGE) initiative. This collection includes data on seismic events, groundwater,...

Moos, D. and Barton, C. Idaho National Laboratory

Apr 18, 2016
49 Resources
0 Stars
Curated

Snake River (Idaho) Geothermal Drilling Project: Innovative Approaches to Geothermal Exploration

The goal of our project was to test innovative exploration technologies using existing and new data, and to ground-truth these technologies using slim-hole core technology. The slim-hole core allowed us to understand subsurface stratigraphy and alteration in detail, and to correla...

Shervais, J. et al Utah State University

Feb 21, 2014
1 Resources
0 Stars
Publicly accessible

Snake River Plain Play Fairway Analysis: Mountain Home Geothermal Area Natural State Model

The Mountain Home area is characterized by high heat flow and temperature gradient. Temperature data are available from 18 boreholes with depths equal to or greater than 200 m, 5 of which have depths ranging from ~1340 m to ~3390 m (MH-1, MH-2, Bostic1, Lawrence D No.1, and Anschu...

Garg, S. et al Utah State University

Jul 28, 2015
4 Resources
0 Stars
Publicly accessible

Innovative Play Fairway Modelling Applied to the Tularosa Basin Project Report

This report describes all of the work done in Phase I of a geothermal exploration project in the Tularosa Basin, as well as an outline for Phase II work, and more.

Bennett, C. et al University of Utah

Oct 16, 2015
1 Resources
0 Stars
Publicly accessible

Snake River Plain Play Fairway Analysis: Phase 2 Report and Phase 3 Proposal

This report presents the results of Phase 2 of the Snake River Plain Play Fairway Analysis project, and a summary of proposed work for Phase 3. Phase 2 focused on new data collection in specific areas of interest identified in Phase 1. These data include new magnetotelluric, seism...