Search GDR Data

Oilwell Conversion (Well API 121913310501) to Geothermal Heat Storage Well for Flexible Electricity Storage

Geothermal growth is limited by a lack of geographically dispersed high-temperature thermal resources and high initial upfront investment in characterization and well construction. This project intended to address the challenges of energy supply intermittency and enhance grid resi...

Malkewicz, N. et al University of Illinois

May 05, 2021
8 Resources
0 Stars
Publicly accessible

Life Cycle Analysis Data and Results for Geothermal and Other Electricity Generation Technologies

Life cycle analysis (LCA) is an environmental assessment method that quantifies the environmental performance of a product system over its entire lifetime, from cradle to grave. Based on a set of relevant metrics, the method is aptly suited for comparing the environmental performa...

Sullivan, J. Argonne National Laboratory

Jun 04, 2013
1 Resources
0 Stars
Publicly accessible

End Use Load Profile (EULP) of US Building Sector resulting from mass GHP retrofits

This collection of datasets describes the change (difference) in hourly energy consumption of the U.S. residential and commercial building stock while replacing existing HVAC systems with ground source heat pumps for all the balancing areas in the US, for all buildings eligible fo...

Liu, X. et al Oak Ridge National Laboratory

Apr 15, 2023
2 Resources
0 Stars
Publicly accessible

Coupling Subsurface and Above-Surface Models for Optimizing the Design of Borefields and District Heating and Cooling Systems

Accurate dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange for seasonal energy storage. Current modeling approaches in building and district energy simulation tools typically consider heat conduct...

Hu, J. et al Lawrence Berkeley National Laboratory

Jan 31, 2022
10 Resources
0 Stars
Publicly accessible

Geothermal Sector Cybersecurity Vulnerability Assessment Presentation

As geothermal resource contributions to the energy sector grow, cybersecurity will be increasingly important to ensure resilient, reliable, and secure clean energy for years to come. An overview of the cybersecurity vulnerability assessment project was developed and presented at t...

Markel, T. et al National Renewable Energy Laboratory

Oct 20, 2020
1 Resources
0 Stars
Publicly accessible

REopt Lite Geothermal Heat Pump Design Requirements

This document describes the design requirements for the geothermal heat pump (GHP) module being added to the existing REopt Lite web tool. This document describes the purpose, users, and functional requirements to which the modified web tool shall conform. This document will be re...

Olis, D. National Renewable Energy Laboratory

Mar 08, 2021
6 Resources
0 Stars
Publicly accessible

Updated U.S. Low-Temperature Heating and Cooling Demand by County and Sector

This dataset includes U.S. low-temperature heating and cooling demand at the county level in major end-use sectors: residential, commercial, manufacturing, agricultural, and data centers. Census division-level end-use energy consumption, expenditure, and commissioned power databas...

Oh, H. and Beckers, K. National Renewable Energy Laboratory

Dec 31, 2022
6 Resources
0 Stars
Publicly accessible

Electricity Market and NREL ATB Resources

The following resources host grid service pricing (e.g. ancillary services) beyond wholesale electric pricing. The NREL Annual Technology Baseline (ATB) provides a consistent set of technology cost and performance data for energy analysis.

Rhodes, G. National Renewable Energy Laboratory

Jan 31, 2020
4 Resources
0 Stars
Curated

Alternative Geothermal Power Production Scenarios

The information given in this file pertains to Argonne life-cycle analyses (LCAs) of the plant cycle stage for a set of ten new geothermal scenario pairs, each comprised of a reference and improved case. These analyses were conducted to compare environmental performances among the...

Sullivan, J. Argonne National Laboratory

Mar 14, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE 4-2492: Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery 2024 Annual Workshop Presentation

This is a presentation on the Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency by The University of Texas at Austin, presented by Mukul M. Sharma. This video slide presentation discusses the following objectives: (1) to place fr...

Sharma, M. Energy and Geoscience Institute at the University of Utah

Sep 16, 2024
1 Resources
0 Stars
Curated

Calculation Tool for Transported Geothermal Energy Using Two-Step Absorption Process

This spreadsheet allows the user to calculate parameters relevant to techno-economic performance of a two-step absorption process to transport low temperature geothermal heat some distance (1-20 miles) for use in building air conditioning. The parameters included are (1) energy de...

Liu, X. et al Oak Ridge National Laboratory

Feb 01, 2016
2 Resources
0 Stars
Publicly accessible

Community Geothermal: Seward Alaska Heat Loop District Energy System Modelica Model

This dataset contains a Modelica-based dynamic thermal simulation model of the Seward Heat Loop project. The model contains building loads generated from DesignBuilder simulations of the four city-owned buildings that are connected to the system. These buildings are heated by a hy...

Mitchell, M. et al National Renewable Energy Laboratory

Sep 29, 2024
1 Resources
0 Stars
In progress

Brady's Geothermal Field Nodal Seismometer Data

This submission includes links to raw data, field notes, metadata, and p-wave arrival auto-picks from processed data (not provided) from the nodal seismometer array deployed at the PoroTomo Natural Laboratory in Brady's Hot Springs, Nevada during the March 2016 testing. The data i...

Parker, L. University of Wisconsin

Mar 30, 2016
7 Resources
0 Stars
Publicly accessible

US Low-Temperature EGS Resource Potential Estimate

Shapefile of shallow, low-temperature EGS resources for the United States, and accompanying paper (submitted to GRC 2016) describing the methodology and analysis. These data are part of a very rough estimate created for use in the U.S. Department of Energy Geothermal Technology O...

Mullane, M. et al National Renewable Energy Laboratory

Jun 30, 2016
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Evaluation of Potential Geochemical Responses to Injection in the FORGE Geothermal Reservoir

Plugging of fracture porosity from mineral precipitation due to injecting cold water into a a geothermal reservoir can impact the overall permeability of the fracture network in the reservoir. This can have serious ramifications on the efficiency of the geothermal resource. Geoche...

Patil, V. and Simmons, S. Energy and Geoscience Institute at the University of Utah

Apr 03, 2019
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 2020-2021 Geothermal Energy/EGS Survey and Results

The Utah FORGE project collaborated with the University of Utahs Department of Communication on a Capstone course during Fall Semester 2020. The course created a survey to gauge the general populations knowledge of geothermal energy and Enhanced Geothermal Systems (EGS). The surve...

Yeo, S. and McKasy, M. Energy and Geoscience Institute at the University of Utah

Jul 20, 2021
1 Resources
0 Stars
Curated

Chemical Impact of Elevated CO2 on Geothermal Energy Production

Numerical simulations have shown that the use of supercritical CO2 instead of water as a heat transfer fluid yields significantly greater heat extraction rates for geothermal energy. If this technology is implemented successfully, it could increase geothermal energy production and...

Carroll, S. et al Lawrence Livermore National Laboratory

Jan 01, 2013
3 Resources
0 Stars
Publicly accessible

Cornell Ithaca Campus heat use data for a model year

Hourly steam use data for all significant buildings from the fiscal year (FY) 2017 (1 July 2016 30 June 2017) are provided. The total annual campus heating load in FY 2017 was about 0.81 trillion Btu (283,000 MWth-hrs). The data are presented as a spreadsheet, detailing on an ho...

Beyers, S. and Gustafson, J. Cornell University

Nov 13, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Telluric Monitoring Experiment Transfer Functions

The Utah Frontier Observatory for Research in Geothermal Energy (FORGE) attempted a stimulation at well 16A(78)-32 during April and May 2022. We recorded telluric and magnetotelluric (MT) data before, during, and after the well stimulation experiment using the FORGE Telluric Monit...

Mendoza, K. and Wannamaker, P. Energy and Geoscience Institute at the University of Utah

May 27, 2022
1 Resources
0 Stars
Curated

Utah FORGE: Area 0.5 m LiDAR Data

During the Fall of 2016 AGRC and the Utah Geological Survey acquired ~205 square miles of 8 points per meter Quality Level 1 LiDAR of The Frontier Observatory for Research in Geothermal Energy (FORGE) area around Milford, Utah in Beaver and Millard Counties in western Utah. The 0....

Allis, R. Energy and Geoscience Institute at the University of Utah

Oct 01, 2016
1 Resources
0 Stars
Publicly accessible

SubTER Final Magnetotelluric (MT) Data: Mineral Mountains, Utah

Subsurface Science, Technology and Engineering Research, and Development (SubTER) Crosscut is a collaboration across the Department of Energy offices involved in research activities in energy production/extraction, subsurface storage, and environmental remediation. This submission...

Wannamaker, P. Energy and Geoscience Institute at the University of Utah

Oct 13, 2021
2 Resources
0 Stars
Publicly accessible

SubTER ZTEM (Z-Axis Tipper Electromagnetic) Survey Results, Mineral Mountains Area, Utah

This data was acquired as part of the Subsurface Science, Technology and Engineering Research, and Development (SubTER) Crosscut which is a collaboration across the Department of Energy offices involved in research activities in energy production/extraction, subsurface storage, an...

Wannamaker, P. Energy and Geoscience Institute at the University of Utah

Oct 13, 2021
1 Resources
0 Stars
Publicly accessible

Understanding Constraints on Geothermal Sustainability Through Reservoir Characterization at Brady Geothermal Field, Nevada

The vast supply of geothermal energy stored throughout the Earth and the exceedingly long time required to dissipate that energy makes the world's geothermal energy supply nearly limitless. As such, this resource holds the potential to provide a large supply of the world's energy ...

Patterson, J. University of Wisconsin

Jul 11, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE 4-2492: Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Workshop Presentation

This is a presentation on the Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency at the Utah FORGE Site project by The University of Texas at Austin, presented by Professor Mukul M. Sharma. The project's objectives were to place f...

Sharma, M. The University of Texas at Austin

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Core Analysis Results

This dataset features petrographic, X-Ray Diffraction (XRD), and Scanning Electron Microscopy Analyses of core samples from well 16A(78)-32, which serves as the injection well for the Utah FORGE Enhanced Geothermal System (EGS) project. In addition to an overview of the analysis,...

Jones, C. et al Energy and Geoscience Institute at the University of Utah

Sep 22, 2023
1 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 Next >>