Search GDR Data

Geologic and Geophysical Data for Wells Drilled at Raft River Valley, Cassia County, Idaho, in 1977 to 1978 and Data for Wells Drilled Previously

In order to better define the size of the thermal anomaly in the Raft River Valley, Idaho, the U.S. Geological Survey drilled a series of intermediate-depth (nominal 500-ft depth) wells in 1977 and 1978. This report presents geologic, geophysical, and temperature data for these dr...

Nathenson, M. et al United States Geological Survey

Oct 31, 2014
1 Resources
0 Stars
Publicly accessible

Dynamic Column Extraction for Europium on Media 1 at Ambient Temperature

This is a dataset for a 200ppm europium solution sent through a column with 12g of media #1 at pH of 3.2. This column experiment was run at ambient temperature at a flow rate of 2mL/min.

Garland, G. Tusaar Corp.

Apr 07, 2015
2 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: Refined Earthquake Focal Mechanism Catalog for Southern California (1981-2010)

A refined earthquake mechanism catalog for southern Califiornia using the HASH method and locations derived from waveform cross-correlation. Each focal mechanism is obtained from grid searching for the best-fitting double-couple focal mechanism solution to both the P-wave first mo...

Blankenship, D. Sandia National Laboratories

Dec 31, 2014
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Results of Tracer Tests

Multiple sets of tracer tests were conducted at the EGS Collab Testbed 2 on the 4100 L at the Sanford Underground Research Facility (SURF), Lead, SD. The enclosed data package includes: tracer recovery results, water balance calculations and rationales, water flow measurement for ...

Neupane, G. et al Idaho National Laboratory

Jul 26, 2022
5 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Materials Testing Report

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This materials testing report is based on thermoplastic and elastomeric materia...

Teodoriu, C. et al Welltec

Nov 08, 2022
2 Resources
0 Stars
Publicly accessible

Utah FORGE: 2023 Induced Seismicity Mitigation Plan

This is the updated Utah FORGE Phase 3B induced seismicity mitigation plan (ISMP) covering the general Utah FORGE area. This new version incorporates newly collected seismic data, including data collected during the 2022 stimulation and a probabilistic seismic hazard assessment (...

Pankow, K. et al University of Utah Seismograph Stations

Aug 09, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: LBNL Status Report on the VEMP Tool 2024

This report describes the modifications made to the Vertical Electromagnetic Profiling (VEMP) borehole tool, currently on loan to Lawrence Berkeley National Laboratory (LBNL) from Japan's Geothermal Energy Research and Development Co., Ltd. (GERD), during its refurbishment. It inc...

Wilt, M. et al Lawrence Berkeley National Laboratory

Feb 16, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Ground Water Level Monitoring Data

Groundwater data around the Utah FORGE site has been collected to determine the piezometric levels and compositional variability. Field measurements in 2020 are designed to obtain and survey new groundwater wells that have been drilled on the distal periphery of the Utah FORGE pro...

Kirby, S. Utah Geological Survey

Sep 30, 2020
1 Resources
0 Stars
Curated

Utah FORGE: Well 58-32 Granite Core Thermal Properties Test Results Report (Oct. 2021)

This is a presentaiton from Metarock Laboratories on the thermal properties of Utah FORGE well 58-32 granite core. The presentation includes pictures of core samples, core details for the samples (sample depths and size), sample thermal expansion test results, and radial velocity ...

Laboratories, M. Energy and Geoscience Institute at the University of Utah

Oct 29, 2021
1 Resources
0 Stars
Curated

West Flank Coso FORGE: Indian Wells Valley Aeromagnetic Data

Aeromagnetic data was collected over the Indian Wells Valley, CA in November 1994. It consisted of 9,033 line-kilometers covering ~4,150 square kilometers, flown at a 250 meter drape with principal line spacing of 0.54 kilometers and 10% cross-lines. The principal orientation is N65E.

Katzenstein, A. et al Sandia National Laboratories

Nov 01, 1994
2 Resources
0 Stars
Publicly accessible

Lithium Sorption from Simulated Geothermal Brine: Impact of pH, Temperature, and Brine Chemistry

Lithium sorption information from experiments. Data includes the effects of pH, temperature and brine chemistry on the sorption of Lithium from a simulated geothermal brine. The sorbent used in the experiments is "hydrothermally produced, Spinel-LiMn2O4". The sorbent was produ...

Renew, J. Southern Research Institute

Feb 06, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well and Spring Chemistry

This is a database containing water chemistry of wells and springs in Utah. The data is located at the Utah Geological Survey. This contains data relevant to the Utah FORGE project.

Moore, J. Energy and Geoscience Institute at the University of Utah

Jan 01, 2002
1 Resources
0 Stars
Publicly accessible

Protocol for Regeneration of Ligand-Depleted Adsorption Media for Rare Earth Element Recovery from Geothermal Brine

Description of experimental protocol used to characterize the effectiveness of regenerating ligand-based adsorption media through the addition of ligands when media were previously depleted of ligands during use. Results of the effectiveness of this regeneration are also described.

Stull, D. Tusaar Corp.

May 24, 2016
1 Resources
0 Stars
Publicly accessible

The Use of 3D Geologic Modeling to Improve Well Targeting in Glass Buttes, Oregon

The Glass Buttes Project includes combining a suite of high-resolution geophysical and geochemical techniques to reduce exploration risk by characterizing hydrothermal alteration, fault geometries and relationships. This is aided through geologic observation, modern remote sensing...

Walsh, P. Ormat Nevada Inc

Oct 09, 2011
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Targeting Geothermal Resources with Geodetic Strain Data Paper

The paper linked below offers an initial assessment of a new method to target potential geothermal resources on the regional scale. The method is based on seeking relationships between geologic structures and geodetic observations of regional tectonic strain.

Blewitt, G. et al Energy and Geoscience Institute at the University of Utah

Oct 01, 2004
1 Resources
0 Stars
Curated

New River Geothermal Exploration (Ram Power Inc.)

The New River Geothermal Exploration (DOE Award No. EE0002843) is located approximately 25km south of the Salton Sea, near town of Brawley in Imperial County and approximately 150km east of San Diego, California. A total of 182 MT Logger sites were completed covering the two sepa...

Mirza, R. and Data, E. Ram Power, Inc.

Nov 15, 2013
20 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Energy Demand Characterization and Surface Plant Modeling for West Virginia University

This dataset provides information gathered to determine end use load and assessment of existing district heating systems (DHS). It also provides Aspen simulation files used to model hybrid natural gas geothermal district heating and cooling (GDHC) system along with Exchange Design...

Garapati, N. West Virginia University

Jan 09, 2020
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All expe...

Yu, J. et al Pennsylvania State University

Jul 01, 2023
27 Resources
0 Stars
Curated

SOLTHERM Thermodynamic Database for Geochemical Modeling

This data submission is a link to a thermodynamic database maintained by the University of Oregon. The data at this link are not 'data results' from sampling. The data at this link comprise a thermodynamic database for aqueous species, minerals, and gases, including data for stoic...

Palandri, J. University of Oregon

Oct 07, 2015
2 Resources
0 Stars
Publicly accessible

Geothermal Thermoelectric Generation (G-TEG) with Integrated Temperature Driven Membrane Distillation and Novel Manganese Oxide for Lithium Extraction Final Report

This project aims to develop an innovative Geothermal ThermoElectric Generation (G-TEG) system specially designed to both generate electricity and extract high-value lithium (Li) from low-temperature geothermal brines. The process combined five modular technologies including silic...

Renew, J. et al Southern Research Institute

Mar 01, 2018
1 Resources
0 Stars
Publicly accessible

Recovery of Rare Earth Elements from Geothermal Fluids through Bacterial Cell Surface Adsorption

We summarized the FY17 and part of FY18 results of the analysis of the effect of several parameters (e.g., total dissolved solids, specific competing metals, pH, and temperature) on REE recovery from geothermal brine in a manuscript that was submitted to Environmental Science & Te...

Jiao, Y. et al Lawrence Livermore National Laboratory

Jan 01, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Area 0.5 m LiDAR Data

During the Fall of 2016 AGRC and the Utah Geological Survey acquired ~205 square miles of 8 points per meter Quality Level 1 LiDAR of The Frontier Observatory for Research in Geothermal Energy (FORGE) area around Milford, Utah in Beaver and Millard Counties in western Utah. The 0....

Allis, R. Energy and Geoscience Institute at the University of Utah

Oct 01, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Drilling Data for Student Competition

Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. This dataset includes both ...

Podgorney, R. et al Idaho National Laboratory

Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Neubrex Well 16B(78)-32 Stimulation Fiber Optic Monitoring Reports April and May, 2024

These reports contain information on the distributed temperature sensing (DTS), distributed strain sensing (DSS), and pressure monitoring during the stimulation of Well 16(B)78-32 at Utah FORGE, in April and May 2024. Reports include information on data collection and calibrations...

Jurick, D. and Guzik, D. Neubrex Energy Services (US), LLC

Apr 30, 2024
3 Resources
0 Stars
Curated

Performance, Cost, and Financial Parameters of Geothermal District Heating Systems for Market Penetration Modeling under Various Scenarios

The U.S. Department of Energy Geothermal Vision (GeoVision) Study is currently looking at the potential to increase geothermal deployment in the U.S. and to understand the impact of this increased deployment. This paper reviews 31 performance, cost, and financial parameters as inp...

Beckers, K. and Young, K. National Renewable Energy Laboratory

Mar 23, 2017
1 Resources
0 Stars
Publicly accessible

<< Previous 23 24 25 26 27 28 29 30 31 32 Next >>