Search GDR Data

Showing results 76 - 100 of 160.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Technologies
Featured Projects
Topics
Data Type
"rock-core stress estimation"×
EGS×

Utah FORGE 2439: Report on Minifrac Tests for Stress Characterization

This report describes minifrac tests conducted in the 16B(78)-32 well at the Utah FORGE site to characterize subsurface stresses, including the magnitude and orientation of the minimum and maximum horizontal stresses and the magnitude of the vertical stress. A minifrac test was co...
Kelley, M. et al Battelle Memorial Institute
Feb 22, 2024
1 Resources
0 Stars
Curated

Utah FORGE 2-2404: Application of Advanced Techniques for Determination of Reservoir-Scale Stress State at Utah FORGE Workshop Presentation

This is a presentation on the Application of Advanced Techniques for Determination of Reservoir-Scale Stress State at Utah FORGE project by the University of Oklahoma, presented by Dr. Ahmad Ghassemi, McCasland Chair Professor. The project's objective was to develop a methodology ...
Ghassemi, A. University of Oklahoma
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All expe...
Yu, J. et al Pennsylvania State University
Jul 01, 2023
27 Resources
0 Stars
Curated

STRESSINVERSE Software for Stress Inversion

The STRESSINVERSE code uses an iterative method to find the nodal planes most consistent with the stress field given fault frictional properties. STRESINVERSE inverts the strike, rake and dip from moment tensor solutions for the in-situ state of stress. The code iteratively solves...
Gritto, R. Array Information Technology
Oct 31, 2018
1 Resources
0 Stars
Publicly accessible

Effective Elastic and Neutron Capture Cross Section Calculations Corresponding to Simulated Fluid Properties from CO2 Push-Pull Simulations

The submission contains a .xls files consisting of 10 excel sheets, which contain combined list of pressure, saturation, salinity, temperature profiles from the simulation of CO2 push-pull using Brady reservoir model and the corresponding effective compressional and shear velocity...
Chugunov, N. and Altundas, B. Lawrence Berkeley National Laboratory
Mar 07, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Logs and Data from Deep Well 58-32 (MU-ESW1)

Data, logs, and graphics associated with the drilling and testing of Utah FORGE deep test well 58-32 (MU-ESW1) near Roosevelt Hot Springs.
Nash, G. and Moore, J. Energy and Geoscience Institute at the University of Utah
Apr 11, 2018
11 Resources
0 Stars
Publicly accessible

Utah FORGE: 2024 Discrete Fracture Network Model Data

The Utah FORGE 2024 Discrete Fracture Network (DFN) Model dataset provides a set of files representing discrete fracture network modeling for the FORGE site near Milford, Utah. The dataset includes four distinct DFN model file sets, each corresponding to different time frames and ...
Finnila, A. and Jones, C. Energy and Geoscience Institute at the University of Utah
Sep 08, 2024
5 Resources
0 Stars
Curated

Utah FORGE 2-2446: Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity Workshop Presentation

This is a presentation on the Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity project by Lawrence Livermore National Laboratory, presented by Dr. Matteo Cusini. The project's objective was to employ a combination of high-fidelity simulations and true...
Cusini, M. and Bunger, A. Lawrence Livermore National Laboratory
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

West Flank Coso, CA Magnetic and Gravity Data

Gravity and aeromagnetic data for West Flank FORGE site.
Katzenstein, A. et al Sandia National Laboratories
May 19, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone

This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE site. Boreholes will be electrically energized and will serve as data sources for future proposed electromagnetic bore...
Um, E. et al Lawrence Berkeley National Laboratory
Nov 15, 2022
4 Resources
0 Stars
Curated

Utah FORGE 5-2615: Shear Enhanced Permeability In a Granitoid Fracture Presentation Slides

Provided here is a set of presentation slides detailing stress-dependent permeability in FORGE granitoid fractures and how fracture slip affects permeability. It outlines empirical correlations between permeability, stress, and fracture aperture, emphasizing that mechanically clos...
Ghassemi, A. and Ye, Z. University of Oklahoma
Feb 28, 2024
1 Resources
0 Stars
Curated

Regional Slip Tendency Analysis of the Great Basin Region

Slip and dilation tendency on the Great Basin fault surfaces (from the USGS Quaternary Fault Database) were calculated using 3DStress (software produced by Southwest Research Institute). Slip and dilation tendency are both unitless ratios of the resolved stresses applied to the f...
E., J. University of Nevada
Sep 30, 2013
1 Resources
0 Stars
Publicly accessible

Seismic Analysis of Spatio-Temporal Fracture Generation During EGS Resource Development Full Moment Tensors and Stress Inversion Catalogs

This submission contains 167 full moment tensor (MT) solutions for the seismicity observed two years prior and three years post start of injection activities. Also included are the azimuth and plunge angles for the three main stress directions sigma1, sigma 2 and sigma 3 at the P...
Gritto, R. et al Array Information Technology
Sep 26, 2018
2 Resources
0 Stars
Publicly accessible

Chemical Impact of Elevated CO2 on Geothermal Energy Production

Numerical simulations have shown that the use of supercritical CO2 instead of water as a heat transfer fluid yields significantly greater heat extraction rates for geothermal energy. If this technology is implemented successfully, it could increase geothermal energy production and...
Carroll, S. et al Lawrence Livermore National Laboratory
Jan 01, 2013
3 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: Downhole Lithologic Data

x,y,z downhole lithologic logs for the wells in and around the West Flank FORGE site based on a review of cuttings, core, and mud logs.
Blankenship, D. Sandia National Laboratories
Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

Reservoir Stimulation Optimization with Operational Monitoring for Creation of EGS

EGS field projects have not sustained production at rates greater than half of what is needed for economic viability. The primary limitation that makes commercial EGS infeasible is our current inability to cost-effectively create high-permeability reservoirs from impermeable, igne...
A., C. Pacific Northwest National Laboratory
Sep 25, 2013
19 Resources
0 Stars
Publicly accessible

Fallon FORGE: Lithology Logs and Well 21-31 Drilling Data

This submission includes lithology logs for all Fallon FORGE area wells; determined from core, cuttings, and thin section. Wells included are 84-31, 21-31, 82-36, FOH-3D, 62-36, 18-5, 88-24, 86-25, FOH-2, 14-36, 17-16, 34-33, 35A-11, 51A-20, 62-15, 72-7, 86-15, Carson_Strat_1_36-3...
Blankenship, D. et al Sandia National Laboratories
Mar 11, 2018
2 Resources
0 Stars
Publicly accessible

Newberry EGS Literature References

Research references to literature about the Newberry geothermal area, Oregon.
Rose, K. National Energy Technology Laboratory
Apr 22, 2016
1 Resources
0 Stars
Publicly accessible

Summary Fracturing of Coso Samples with StimuFrac

Lab-scale stimulation was performed on Coso samples obtained from a single core (1623 feet TVD, reservoir Coso CGC 18-27) using StimuFrac and control fluid in the absence of stimuli-responsive polymer.
Fernandez, C. Pacific Northwest National Laboratory
Sep 06, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Data for 3-D Model Development Lithology, Temperature, Pressure, and Stress

This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. T...
Podgorney, R. Idaho National Laboratory
Mar 17, 2020
2 Resources
0 Stars
Publicly accessible

Utah FORGE 4-2541: Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design Workshop Presentation

This is a presentation on the Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design at Utah FORGE project by Fervo Energy, presented by Sireesh Dadi. The project's objective was to develop a multistage hydraulic stimulation approach designed specifically to t...
Dadi, S. and Norbeck, J. Fervo Energy
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Hydraulic Pressure Test Results

The EGS Collab experiment 2 was focused on testing shear stimulation techniques. Shear stimulation, in this case, means using hydraulic pressure to cause shear slip on preexisting fracture or fault planes such that the hydraulic conductivity of the fracture or fault increases. The...
Burghardt, J. et al Lawrence Berkeley National Laboratory
Feb 17, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone

Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...
Um, E. et al Lawrence Berkeley National Laboratory
Feb 06, 2023
4 Resources
0 Stars
Curated

Utah FORGE 2-2446: Report on Phase Field Modelling of Near-Wellbore Hydraulic Fracture Nucleation and Propagation

This is a report that describes the modelling of fracture nucleation and propagation in the near-wellbore region to understand the relationship between in situ stress and fracture patterns. A novel phase field formulation is described here, which represents fractures as a diffuse ...
Cusini, M. and Fei, F. Lawrence Livermore National Laboratory
Dec 31, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Well 16B(78)-32 Field-Test Data from Mini-Frac Tests

This submittal includes the field-test data collected during stress tests conducted in the Utah FORGE 16B(78)-32 wellbore to measure/characterize the stresses in the geothermal reservoir. The type of stress test performed is referred to as a mini-frac test or a micro-frac test. Th...
Kelley, M. et al Battelle Memorial Institute
Jul 02, 2023
3 Resources
0 Stars
Curated
<< Previous1234567Next >>