Search GDR Data

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32

This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-...

Lu, G. et al University of Pittsburgh

Aug 30, 2024
2 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Thermal Properties of Geologic Formations in Illinois Basin

Thermal property data for rocks and and minerals and unconsolidated (glacial) sediments units from within and outside the Illinois Basin were compiled for modeling heat transport in the subsurface.

Lin, Y. et al University of Illinois

Mar 30, 2018
6 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Second Set Tracer Test Results

The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments. The first multi-well experimental site was established at the 4850 level in the Homestake Mine in Lead,...

Neupane, G. et al Idaho National Laboratory

Dec 19, 2019
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Slide-Hold-Slide Experiments on Gneiss at Increased Temperature

Included are data from triaxial, single-inclined-fracture friction experiments. The experiments were performed with slide-hold-slide protocol on Utah FORGE gneiss at increased temperature. With a ~10 MPa normal stress, temperatures vary between experiments from room temperature u...

Eijsink, A. and Elsworth, D. Pennsylvania State University

Jul 25, 2023
24 Resources
0 Stars
Publicly accessible

2016 Passive Seismic Imaging of the Dixie Valley Geothermal Well Field for EGS Favorability and Fault Mapping

This submission provides reports on the results of seismic data analyses, statistical data sets of rock properties under the DVGWF, GIS data for new maps of EGS favorability, and a link to raw seismogram data archived by the IRIS-DMS.

Louie, J. et al University of Nevada, Reno

Nov 01, 2015
7 Resources
1 Stars
Publicly accessible

EGS Collab Experiment 1: Earth Model Input Files

The EGS Collab is conducting experiments in hydraulic fracturing at a depth of 1.5 km in the Sanford Underground Research Facility (SURF) on the 4850 Level. A total of eight ~60m-long subhorizontal boreholes were drilled at that depth on the western rib of the West Access Drift. S...

Neupane, G. and Sigma-V, T. Idaho National Laboratory

Dec 19, 2019
6 Resources
0 Stars
Publicly accessible

Seismic Survey 2016 Data at San Emidio Nevada

Included here are seismic data recorded at the San Emidio Geothermal field in Nevada. This passive seismic data were collected as part of the DOE-funded Subsurface Technology and Engineering R&D (SubTER) project to advance imaging and characterization of geothermal permeability. ...

Lord, N. et al University of Wisconsin Madison

Jan 05, 2016
5 Resources
0 Stars
Publicly accessible

Imperial Valley Dark Fiber Project Continuous DAS Data

The Imperial Valley Dark Fiber Project acquired Distributed Acoustic Sensing (DAS) seismic data on a ~28 km segment of dark fiber between the cities of Calipatria and Imperial in the Imperial Valley, Southern California. Dark fiber refers to unused optical fiber cables in telecomm...

Ajo-Franklin, J. et al Lawrence Berkeley National Laboratory

Nov 10, 2020
4 Resources
0 Stars
Publicly accessible

Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations

The purpose of phase 1 is to determine the feasibility of integrating geologic CO2 storage (GCS) with geothermal energy production. Phase 1 includes reservoir analyses to determine injector/producer well schemes that balance the generation of economically useful flow rates at the ...

A., T. Lawrence Livermore National Laboratory

Jan 01, 2012
9 Resources
0 Stars
Publicly accessible

PoroTomo: BRAD, BRD1, and BRDY GPS Station RINEX Files April 14, 2017

This dataset provides links to daily RINEX files for three GPS stations at Brady's Hot Springs as of April 14, 2017. The data is formatted as compressed GNSS RINEX observation files, accessible through formatted CSV files, as well as in links to the complete daily time series data...

Kreemer, C. University of Wisconsin

Apr 14, 2017
9 Resources
0 Stars
Publicly accessible

Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project

The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes....

Feigl, K. and PoroTomo Team, . University of Wisconsin

Mar 06, 2019
10 Resources
0 Stars
Publicly accessible

WISE-CASING: Frequency Domain EM Data from Cymric Oil Field, CA

Cymric oil field frequency domain electromagnetic (FEM) data with two parts of data labeled Part 1 and Part 2. Part 1 utilizes an electrical source line parallel to the receiver line, while Part 2 utilizes an electrical source line at a 75 deg angle to the receiver line. Data are ...

Wang, J. et al Lawrence Berkeley National Laboratory

Apr 30, 2019
11 Resources
0 Stars
Publicly accessible

WISE-CASING: DC Simulation at Containment and Monitoring Institute (CaMI), Calgary, Canada

For the model calculation we applied EM3D using completion diagram of CaMI site and a background resistivity consistent with the borehole logs. It was also important to use the accurate position of the return electrode. We note that for the data fit the code also incorporated we...

Wang, J. and Wilt, M. Lawrence Berkeley National Laboratory

Apr 30, 2019
7 Resources
0 Stars
Publicly accessible

WISE-CASING: Time Domain Reflectometry Data from Cymric Field, CA

The objective of this field test is to validate several technologies for non-invasive well integrity assessment using existing wells with a known completion. The tests were made at the Cymric oil field, which is a steam flood operation. The wells therefore undergo similar downhole...

Wang, J. Lawrence Berkeley National Laboratory

Feb 21, 2019
5 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: 3D Seismic Velocity Model and Updated Microseismic Catalog Using Transfer-Learning Aided Double-Difference Tomography

This package contains a 3D Seismic velocity model and an updated microseismic catalog associated with a proceedings paper (Chai et al., 2020) published in the 45th Workshop on Geothermal Reservoir Engineering. The 3D_seismic_velocity_model text file contains x (m), y(m), z(m), P-w...

Chai, C. et al Oak Ridge National Laboratory

Apr 20, 2020
7 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: SIMFIP Notch-164 GRL Paper

Characterizing the stimulation mode of a fracture is critical to assess the hydraulic efficiency and the seismic risk related to deep fluid manipulations. We have monitored the three-dimensional displacements of a fluid-driven fracture during water injections in a borehole at ~1.5...

Guglielmi, Y. Lawrence Berkeley National Laboratory

Sep 24, 2020
9 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 78B-32 Daily Drilling Reports and Logs

This data set includes the daily drilling reports and Pason data for well 78B-32 and Schlumberger logs acquired after drilling completion. This well was drilled between June 27th and July 31st of 2021. Also included is raw and processed data for a variety of well data metrics incl...

McLennan, J. Energy and Geoscience Institute at the University of Utah

Aug 09, 2021
22 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Circulation Testing Processed data

This submission includes processed and reduced data for circulation testing that was conducted at the 164' fracture on the 4850 ft level of the Sanford Underground Research Facility. The circulation tests were done to test the flow through the 164' fracture in the EGS Collab Exper...

Fu, P. et al Lawrence Livermore National Laboratory

Apr 01, 2021
7 Resources
0 Stars
Publicly accessible

Data of High-Temperature Dynamic LCM Testing Setup

Data from high temperature dynamic sealing tests for various fracture widths, at various temperatures (degrees F), with 5 wt.% bentonite-based mud containing various material fiber contents, at 100 to 400 psi differential pressure. Data from pressure test and evaluation of the dy...

Magzoub, M. et al University of Oklahoma

May 31, 2021
11 Resources
0 Stars
Publicly accessible

GOOML Kahunanui Data Curation, Historical Modeling, Forecast Modeling, and Genetic Optimization Examples

This dataset contains example files and Jupyter Notebooks associated with the Geothermal Operational Optimization using Machine Learning (GOOML) framework, specifically for the fictional Kahunanui (KHN) geothermal power plant. The dataset includes synthetic time series data, confi...

Taverna, N. et al Upflow

Jan 30, 2023
10 Resources
0 Stars
In curation

Stanford Thermal Earth Model for the Conterminous United States

Provided here are various forms of the Stanford Thermal Earth Model, as well as the data and methods used for its creation. The predictions produced by this model were visualized in two-dimensional spatial maps across the modeled depths (0-7 km) for the conterminous United States....

Aljubran, M. and Horne, R. Stanford University

Mar 14, 2024
9 Resources
2 Stars
Publicly accessible

Fallon FORGE: Geophysics and Geochemistry

The data is associated to the Fallon FORGE project and includes mudlogs for all wells used to characterize the subsurface, as wells as gravity, magnetotelluric, earthquake seismicity, and temperature data from the Navy GPO and Ormat. Also included are geologic maps from the USGS a...

Blankenship, D. Sandia National Laboratories

May 23, 2016
5 Resources
0 Stars
Publicly accessible

High-Temperature Inorganic Self-Healing Inorganic Cement Composites

The data files below summarize the results from various experiments testing properties of high-temperature self-healing inorganic cement composites. These properties include cement-carbon steel bond strength, Young's modulus recovery, matrix recovery strength, and compressive stre...

Pyatina, T. and Sugama, T. Brookhaven National Laboratory

Sep 13, 2017
5 Resources
0 Stars
Publicly accessible

Geocellular model of St. Peter Sandstone for University of Illinois at Urbana-Champaign DDU Feasibility Study

The geocellular model of the St. Peter Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...

Damico, J. University of Illinois

Dec 31, 2018
5 Resources
0 Stars
Publicly accessible

<< Previous 35 36 37 38 39 40 41 Next >>