Search GDR Data
Showing results 1 - 19 of 19.
Show
results per page.
Order by:
Available Now:
Technologies
Featured Projects
Topics
Data Type
Utah FORGE 2-2439v2: Predicting Far-Field Stresses using Finite Element Model Based on Near-Wellbore Machine Learning Estimates for Well 16A(78)-32
This report presents the far-field stress predictions at two locations along the vertical section of well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-wellbore st...
Lu, G. et al University of Pittsburgh
Aug 30, 2024
2 Resources
0 Stars
Awaiting curation
2 Resources
0 Stars
Awaiting curation
Utah FORGE: Phase 3 Magnetotelluric (MT) Data
New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...
Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah
Oct 01, 2020
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
Utah FORGE: Southwestern Utah Magnetotelluric (MT) Data
This comprehensive magnetotellurics (MT) dataset, which covers southwestern Utah, integrates 600 sites from various surveys, including those from the Utah FORGE, SubTER, and Play Fairway projects, all of which are linked below. The core of this dataset is the use of a 3D finite el...
Wannamaker, P. and Marris, V. Energy and Geoscience Institute at the University of Utah
Jan 22, 2024
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Utah FORGE 2-2446: Report on Phase Field Modelling of Near-Wellbore Hydraulic Fracture Nucleation and Propagation
This is a report that describes the modelling of fracture nucleation and propagation in the near-wellbore region to understand the relationship between in situ stress and fracture patterns. A novel phase field formulation is described here, which represents fractures as a diffuse ...
Cusini, M. and Fei, F. Lawrence Livermore National Laboratory
Dec 31, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE 2-2439: A Multi-Component Approach to Characterizing In-Situ Stress: Laboratory, Modeling and Field Measurement Workshop Presentation
This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement project by Battelle [Columbus, OH], presented by Mark Kelley. The project's objective was to characterize stress in the U...
Kelley, M. and Bunger, A. Battelle Memorial Institute
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE 2024 Annual R&D Workshop: University of Pittsburgh A Multi-Component Approach to Characterizing In-Situ Stress at the Utah FORGE Site: Laboratory Modelling and Field Measurements
This project characterizes the stress in the Utah FORGE EGS reservoir using three methods:
Method 1: Demonstrate complimentary laboratory rock-core stress estimation combined with Machine Learning approach for measuring in-situ stress from field sonic log data;
Method 2: Complete...
Bunger, A. Energy and Geoscience Institute at the University of Utah
Sep 04, 2024
1 Resources
0 Stars
Awaiting curation
1 Resources
0 Stars
Awaiting curation
Utah FORGE: Report and Associated Data from Measuring and Modeling Deformation 2018 through 2024
The report provided here describes research activities between August 16th, 2018 and July 30th, 2024. The goals of the research activities are to conduct an Interferometric Synthetic Aperture Radar (InSAR) analysis and Ground Surface Deformation Modeling at the Utah FORGE site. In...
Feigl, K. and Batzli, S. University of Wisconsin Madison
Aug 16, 2018
6 Resources
0 Stars
Curated
6 Resources
0 Stars
Curated
Utah FORGE: Targeting Geothermal Resources with Geodetic Strain Data Paper
The paper linked below offers an initial assessment of a new method to target potential geothermal resources on the regional scale. The method is based on seeking relationships between geologic structures and geodetic observations of regional tectonic strain.
Blewitt, G. et al Energy and Geoscience Institute at the University of Utah
Oct 01, 2004
1 Resources
0 Stars
Curated
1 Resources
0 Stars
Curated
Utah FORGE 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone
This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE site. Boreholes will be electrically energized and will serve as data sources for future proposed electromagnetic bore...
Um, E. et al Lawrence Berkeley National Laboratory
Nov 15, 2022
4 Resources
0 Stars
Curated
4 Resources
0 Stars
Curated
Utah FORGE: Heat Flow Contours and Well Data
This submission contains a shapefile of heat flow contour lines around the FORGE site located in Milford, Utah. The model was interpolated from data points in the Milford_wells shapefile. This heat flow model was interpolated from 66 data points using the kriging method in Geostat...
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 09, 2016
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE 2439: Well 16B(78)-32 Field-Test Data from Mini-Frac Tests
This submittal includes the field-test data collected during stress tests conducted in the Utah FORGE 16B(78)-32 wellbore to measure/characterize the stresses in the geothermal reservoir. The type of stress test performed is referred to as a mini-frac test or a micro-frac test. Th...
Kelley, M. et al Battelle Memorial Institute
Jul 02, 2023
3 Resources
0 Stars
Curated
3 Resources
0 Stars
Curated
Utah FORGE 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone
Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...
Um, E. et al Lawrence Berkeley National Laboratory
Feb 06, 2023
4 Resources
0 Stars
Curated
4 Resources
0 Stars
Curated
Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements
The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...
Alumbaugh, D. et al Lawrence Berkeley National Laboratory
Dec 01, 2022
5 Resources
0 Stars
Curated
5 Resources
0 Stars
Curated
Utah FORGE 3-2535: Compilation of Geodetic Data and Estimation of Associated Deformation
Report on possible geodetic signature of the 3 stimulations in April 2022 as well as a comparison with existing InSAR data gathered over the site before, during, and after the stimulation. In geothermal production it is important to understand the existing stress field and the cha...
Vasco, D. et al Lawrence Berkeley National Laboratory
Apr 29, 2022
4 Resources
0 Stars
Curated
4 Resources
0 Stars
Curated
Utah FORGE: Powder X-ray Diffraction Data from Well 16A(78)-32 Core
This dataset from Lawrence Livermore National Laboratory (LLNL) consists of four raw X-ray diffraction (XRD) scans and preliminary results of quantitative XRD analysis. The scanned samples were prepared from four subcores, which came from various depths of the FORGE well 16A(78)-3...
Kroll, K. et al Lawrence Livermore National Laboratory
Jul 27, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE 3-2535: Preliminary Report on Development of a Reservoir Seismic Velocity Model
This report describes the development of a preliminary 3D seismic velocity model at the Utah FORGE site and first results from estimating seismic resolution in the generated fracture volume during Stage 3 of the April 2022 stimulation.
A preliminary 3D velocity model for the larg...
Gritto, R. Array Information Technology
Jan 30, 2023
1 Resources
0 Stars
Curated
1 Resources
0 Stars
Curated
Utah FORGE: Development of a Reservoir Seismic Velocity Model and Seismic Resolution Study
This is data from and a final report on the development of a 3D velocity model for the larger FORGE area and on the seismic resolution in the stimulated fracture volume at the bottom of well 16A-32. The velocity model was developed using RMS velocities of the seismic reflection su...
Vasco, D. and Chan, C. Array Information Technology
Apr 30, 2022
2 Resources
0 Stars
Curated
2 Resources
0 Stars
Curated
Utah FORGE 3-2417: Simulations for Distributed Acoustic Sensing Strain Signatures as an Indicator of Fracture Connectivity
This dataset encompasses simulations of strain signatures from both hydraulically connected and "near-miss" fractures in enhanced geothermal systems (EGS). The files and results are presented from the perspective of digital acoustic sensing's (DAS) potential to differentiate the t...
Ward-Baranyay, M. et al Rice University
Jan 01, 2023
4 Resources
0 Stars
Curated
4 Resources
0 Stars
Curated
Utah FORGE 2439: A Multi-Component Approach to Characterizing In-Situ Stress
Core-based in-situ stress estimation, Triaxial Ultrasonic Velocity (labTUV) data, and Deformation Rate Analysis (DRA) data for Utah FORGE well 16A(78)-32 using triaxial ultrasonic velocity and deformation rate analysis. Report documenting a multi-component approach to characterizi...
Bunger, A. et al Battelle Memorial Institute
Dec 13, 2022
4 Resources
0 Stars
Curated
4 Resources
0 Stars
Curated