Search GDR Data
Showing results 1 - 25 of 290.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
This experiment is testing the tube waves reflected from the bottom of the well. We put six single-channel geophones on the surface and a 24-channel downhole hydrophone into the well. The well is about 30 meters deep. Just a steel casing in the sand formation, no cement.
Utah FORGE held a two-day seismic workshop on the University of Utah campus in Salt Lake City, Utah on September 26 and 27, 2022 to share what was learned from the seismic monitoring during the 2022 stimulation. This is a report documenting this workshop. The meeting was structure...
This submission includes synthetic seismic modeling data for the Push-Pull project at Brady Hot Springs, NV. The synthetic seismic is all generated by finite-difference method regarding different fracture and rock properties.
This is the updated Utah FORGE Phase 3B induced seismicity mitigation plan (ISMP) covering the general Utah FORGE area. This new version incorporates newly collected seismic data, including data collected during the 2022 stimulation and a probabilistic seismic hazard assessment (...
This test was conducted at the Chevron Cymric oilfield in the California central valley near Bakersfield. A reflected seismic signal was observed in all three components (x, y, z) of the 3-component Episensor geophone, as well as all phones on the single component array. The arriv...
This dataset contains seismic event detections acquired using the 151 Nodal geophones deployed at the Utah FORGE site in April 2019. Details regarding the publishing are available in the paper linked below (Mesimeri, M. and K. L. Pankow et al. 2020). A frequency-domain-based algor...
The University of Utah Seismograph Stations (UUSS) are responsible for the seismic monitoring of the experiments and have installed a series of permanent surface and borehole seismic instruments around the Utah FORGE project site. This report discusses the methods used for proper ...
This is data from and a final report on the development of a 3D velocity model for the larger FORGE area and on the seismic resolution in the stimulated fracture volume at the bottom of well 16A-32. The velocity model was developed using RMS velocities of the seismic reflection su...
This data is associated with the Nevada Play Fairway project and contains 2D seismic profile data in cropped jpegs and tiffs, both interpreted and uninterpreted. Seismic data owned or controlled by Seismic Exchange, Inc.; interpretation is that of the University of Nevada, Reno.
Location of seismic lines carried out under DOE funded project Advanced Seismic Data Analysis Program (The Hot Pot Project). ArcGIS map package containing topographic base map, Township and Range layer, Oski BLM and private leases at time of survey, and locations, with selected sh...
The report outlines the updated Traffic Light System (TLS) for the Utah FORGE project, which aims to mitigate seismic risks associated with Enhanced Geothermal Systems (EGS) operations. It integrates lessons from past operations, including stimulation and circulation experiments a...
This report describes the development of a preliminary 3D seismic velocity model at the Utah FORGE site and first results from estimating seismic resolution in the generated fracture volume during Stage 3 of the April 2022 stimulation.
A preliminary 3D velocity model for the larg...
This is 2D and 3D seismic reflection data from Utah FORGE reprocessed during Phase 2c. The readme file containing an explanation of the data including data formats, software that can be used, processing, and projection and datum used. The Reprocessing document gives the rationale ...
Brady's geothermal field seismic network station locations and dates of operation.
This is a composite 3D seismic velocity that was constructed from compiled information from several local studies regarding seismic velocities and structural information. This seismic velocity model is provided in NonLinLoc format (slow_len), which is readily usable in NonLinLoc ...
This set of data contains raw and Initially-processed 2D and 3D seismic data from the Utah FORGE study area near Roosevelt Hot Springs. Reprocessed versions of these data can be accessed at the linked submission in the Resources section titled "Reprocessed Seismic Reflection Data....
This report summarizes the data quality from the Utah FORGE borehole passive seismic sensors (PSS) tools at well sites 58-32 and 78B-32. Two level Avalon tools were installed on 09-28-2022 and 09-29-2022 by representatives from Avalon, Schlumberger, University of Utah, and Instrum...
List of triggered events recorded on LBNL's permanent EGS seismic array at Brady's geothermal field. This submission also includes links to the NCEDC EGS Earthquake Catalog Search page and to the metadata for the seismic array installed at Brady's Geothermal Field.
Seismic Line Location Map Hot Pot Project, Humboldt County, Nevada 2010. Detailed map (pdf) showing topographic base map, Township and Range layer, Oski BLM and private leases at time of survey, and locations, with selected shot points, of the five seismic lines.
1301 Vertical Component seismic instruments were deployed at San Emidio Geothermal field in Nevada in December 2016. The first record starts at 2016-12-05T02:00:00.000000Z (UTC) and the last record ends at 2016-12-11T14:00:59.998000Z (UTC). Data are stored in individual files in o...
This submission contains an ASCII text file of seismic velocities derived from ambient noise cross-correlation used to create a model of seismic velocity as a 1-D function of depth in addition to a quarterly report describing the creation and use of the model. Model uses 28 Green'...
This is a PDF file generated by Woolsey Land Surveying, P.C containing the surveyed locations, as located, in Latitude and Longitude degrees, of the Utah FORGE FSB4, FSB5, & FSB6 shallow seismic well locations.
Fourteen seismic reflection profiles and their interpretations for the southern Carson Sink within and proximal to the proposed Fallon FORGE site. Five profiles were provided by the Navy Geothermal Program Office and reprocessed by Optim Inc. Nine proflies were acquired from the S...
The objective of this project is to use a multi-disciplinary, three-tiered approach to assess the geothermal resource and determine the feasibility of implementing a large-scale, direct-use facility for the Hawthorne Army Depot (HAD) and the various town and county facilities in H...
This dataset contains seismic event catalogs from the hydraulic stimulation of wells 16A(78)-32 and 16B(78)-32 at the Utah FORGE site in April 2024. The data was collected by Geo Energy Suisse (GES) using a variety of seismic monitoring technologies, including 3-component (3C) geo...
Google Map