Search GDR Data
Showing results 1 - 25 of 210.
Show
results per page.
Order by:
Available Now:
Technologies
Featured Projects
Topics
Data Type
Utah FORGE: Preliminary Monitoring, Analyses, and Impact Assessment
Preliminary monitoring and analyses for the Utah FORGE Milford Site.
Includes a report detailing the seismic monitoring goals and results, a detailed techno-economic infrastructure assessment with an analysis, a budget, schedules, and cost summaries, and a summary of environmental...
Pankow, K. Energy and Geoscience Institute at the University of Utah
Feb 09, 2017
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Utah FORGE 1-2551: Development of a Multi-Stage Fracturing System and Wellbore Tractor 2024 Annual Workshop Presentation
This is a presentation on the Development of a Multi-Stage Fracturing System and Wellbore Tractor by Colorado School of Mines, presented by William Fleckenstein. This video describes (1) the development and use of a low-cost and rapid multistage fracture stimulation technology wit...
Fleckenstein, W. Energy and Geoscience Institute at the University of Utah
Jan 13, 1970
1 Resources
0 Stars
Curated
1 Resources
0 Stars
Curated
Utah FORGE 1-2551: Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores Workshop Presentation and Report
Included here are a presentation recording, slides, and report on the Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores project by Colorado School of Mines, presented by Dr. William W. Fleckenstei...
Fleckenstein, W. et al Colorado School of Mines
Sep 08, 2023
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Utah FORGE: Slide-Hold-Slide Experiments on Gneiss at Increased Temperature
Included are data from triaxial, single-inclined-fracture friction experiments. The experiments were performed with slide-hold-slide protocol on Utah FORGE gneiss at increased temperature. With a ~10 MPa normal stress, temperatures vary between experiments from room temperature u...
Eijsink, A. and Elsworth, D. Pennsylvania State University
Jul 25, 2023
24 Resources
0 Stars
Curated
24 Resources
0 Stars
Curated
Utah FORGE: Roosevelt Hot Springs Analytical Well-Based Temperature Model Data
This submission contains a cumulative record of one-dimensional temperature modeling based off of well data in the vicinity of the Utah FORGE site. Temperature log data from wells used, and in some cases were extrapolated below the bottom of a number of wells. The data were corre...
Podgorney, R. and Allis, R. Idaho National Laboratory
Dec 07, 2018
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Groundwater Levels Updated March 2022
This Excel spreadsheet contains Utah FORGE groundwater data for wells WOW2 and WOW3. The data was updated on March 16th, 2022 and contains legacy data. Groundwater data includes the level, offset, date, and time for each measurement. Temperature, drift, water elevation and other p...
Kirby, S. Utah Geological Survey
Mar 16, 2022
1 Resources
0 Stars
Curated
1 Resources
0 Stars
Curated
Utah FORGE: 2022 Well Stimulation Seismicity Data Including SeGY Data
This is a link to the Utah FORGE seismic data distribution site hosted by the University of Utah Seismograph Stations. The data was collected from downhole geophone strings in wells 56-32, 58-32 and 78B-32 during the 2022 stimulation of well 16A(78)-32. This dataset, which was upd...
Pankow, K. University of Utah Seismograph Stations
Apr 14, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: TEM and Gravity Data
This submission includes a gravity data in text format and as a GIS point shapefile and transient electromagnetic (TEM) raw data. Each text file additionally contains location data (UTM Zone 12, NAD83) and elevation (meters) data for that station.
The gravity data shapefile was i...
Hardwick, C. and Nash, G. Energy and Geoscience Institute at the University of Utah
Feb 05, 2018
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Utah FORGE 3-2417: Meteorological Data During 2023 Completion/Circulation
This preliminary data archive includes meteorological data recorded at the Utah FORGE facility over the period of time including the completion/cementing of well 16B(78)-32 and the initial 2023 circulation test, largely occurring in June/July/August of 2023. This information may p...
Ajo-Franklin, J. Rice University
Jun 10, 2024
5 Resources
0 Stars
Curated
5 Resources
0 Stars
Curated
Utah FORGE: Well Data for Student Competition
Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site.
Well Accord-1 was drilled decades ago for geothermal exploration purposes. While ...
Podgorney, R. et al Idaho National Laboratory
Dec 07, 2018
12 Resources
0 Stars
Publicly accessible
12 Resources
0 Stars
Publicly accessible
Utah FORGE: Well 58-32 Stimulation Data
Pressure, temperature, and flow data from open-hole, upper perforation, and lower perforation well stimulations gathered from various tools collected at well 58-32 during phase 2C.
Best, S. Geothermal Resource Group
Apr 20, 2019
16 Resources
0 Stars
Publicly accessible
16 Resources
0 Stars
Publicly accessible
Utah FORGE: GPS Data Deformation Monitoring
This data bundle contains raw GPS data files and resulting data using Trimble Business Center and NOAA OPUS to process the GPS data in spreadsheets with station coordinates and elevations. A map of station locations is included along with the final processing report which includes...
Erickson, B. and McKean, A. Energy and Geoscience Institute at the University of Utah
Jun 24, 2019
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Phase 1a Tensor Strainmeter Data for the April, 2022 Stimulation of Well 16A(78)-32
Data from two Tensor Optical Fiber Strainmeters that were operational during Stages 1, 2, and 3 of the April, 2022 stimulation of well 16A(78)-32. Each csv file contains data from each stimulation stage (stage1, stage2, stage3) for both Phase 1a strainmeter installations (FS01, f...
DeWolf, S. and Murdoch, L. Clemson University
Sep 15, 2022
8 Resources
0 Stars
Publicly accessible
8 Resources
0 Stars
Publicly accessible
Utah FORGE: Fluid Injection Induced Shearing Experiments on Fractured Granitoid at Elevated Temperatures
This repository contains experimental data from a series of fluid injection-induced shearing tests conducted on Utah FORGE granitoid. The experiments were performed using an aluminum triaxial pressure vessel (TEMCO) apparatus at Pennsylvania State University. The primary aim was t...
Elsworth, D. et al Pennsylvania State University
Aug 12, 2024
16 Resources
0 Stars
Curated
16 Resources
0 Stars
Curated
Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments
Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite.
All expe...
Yu, J. et al Pennsylvania State University
Jul 01, 2023
27 Resources
0 Stars
Curated
27 Resources
0 Stars
Curated
Utah FORGE: Composite Raw Gravity Data 2021
This is a composite raw gravity dataset of the Utah FORGE area taken over time from December 2018 to to June 2021. The data shows differences in local gravity at different location across Utah FORGE. Included with the gravity data is the NAD83 UTM coordinates of each station in me...
Hardwick, C. Utah Geological Survey
Jun 04, 2021
1 Resources
0 Stars
Curated
1 Resources
0 Stars
Curated
Utah FORGE: Earth Model Mesh Data for Selected Surfaces
This submission contains a number of data files with vertices of meshed/interpolated surfaces used in the Phase 2B earth model. Examples include land surface (based on 10-meter DEM), the granitoid-basin fill contact, several faults, and also interpolated temperature isosurfaces f...
Podgorney, R. Idaho National Laboratory
Dec 07, 2018
6 Resources
0 Stars
Publicly accessible
6 Resources
0 Stars
Publicly accessible
Utah FORGE: AGRC GIS Database for the State of Utah
This is a link to the Automated Geographic Reference Center (AGRC) that houses GIS data for the state of Utah. This includes geoscience, cadastre, elevation and terrain, digital aerial photography, roads, aquifer data, etc. Several GIS datasets used in the Utah FORGE project origi...
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 02, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Groundwater Levels Updated 2021
Contains Utah FORGE ground water data for wells WOW2 and WOW3. The data was updated on October 5th, 2021 and contains legacy data. Groundwater data includes the level, offset, date, and time for each measurement. Temperature, drift, water elevation and other parameters are recorde...
Kirby, S. Energy and Geoscience Institute at the University of Utah
Oct 05, 2021
1 Resources
0 Stars
Curated
1 Resources
0 Stars
Curated
Utah FORGE: Downhole Geophone Seismic Data (August 2022)
This is a link to downhole geophone data collected by Schlumberger. These data were collected in the Utah FORGE deep seismic monitoring wells 58-32 and 56-32. The format is a standard SEGY and the units are bits. To convert to acceleration (m/s2) multiply by 2.333 x 10-7. Use one ...
Pankow, K. and Schlumberger, S. University of Utah Seismograph Stations
Aug 25, 2022
3 Resources
0 Stars
Curated
3 Resources
0 Stars
Curated
Utah FORGE: Well 16A(78)-32 Drilling Data
This dataset includes survey data, drilling data, daily reports, summaries of daily operations, and rig photos from the drilling of Utah FORGE well 16A(78)-32, which is a highly deviated deep well. It was completed 60 days ahead of schedule.
Rig move in began 10/22/2020 and dril...
McLennan, J. et al Energy and Geoscience Institute at the University of Utah
Jan 08, 2021
15 Resources
0 Stars
Curated
15 Resources
0 Stars
Curated
Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Stimulation Pressure and Circulation Data April, 2024
This dataset consists of all of the pressure pumping data for Utah FORGE Well16A78-32 fracturing stages, Well 16B78-32 fracturing stages, and a 9-hour circulation test which took place after all of the frac plugs were drilled out. Fracturing in the wells took place in stages from ...
England, K. Energy and Geoscience Institute at the University of Utah
Jun 03, 2024
4 Resources
0 Stars
Curated
4 Resources
0 Stars
Curated
Utah FORGE: Drilling Data for Student Competition
Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. This dataset includes both ...
Podgorney, R. et al Idaho National Laboratory
Dec 07, 2018
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE 5-2615: Laboratory Data for Insights on Hydraulic Fracture Closure and Stress Measurement
This dataset includes data from injection/fall-off experiments conducted in controlled laboratory settings. The aim is to investigate the physics governing fracture closure and the associated stress measurements during hydraulic fracturing. These time series data include flow rat...
Ye, Z. and Ghassemi, A. The University of Oklahoma
Jun 12, 2024
5 Resources
0 Stars
Curated
5 Resources
0 Stars
Curated
Utah FORGE: Well 58-32 Injection Test Data
This submission contains pressure and flow time series data from the reservoir testing of Well 58-32. These activities were part of the Utah FORGE Phase 2B site suitability confirmatory testing.
Podgorney, R. and McLennan, J. Idaho National Laboratory
Dec 07, 2018
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible