Search GDR Data
Showing results 101 - 125 of 451.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
This is a compilation of logs and data from Well Acord 1-26 in the Roosevelt Hot Springs area in Utah. This well is also in the Utah FORGE study area.
Logs include: mud log (45'-12645'), compensated densilog (1102'-7923', 7900'-12644'), neutron log (1102'-7923'), dual induction ...
The Portland Basin is a prime location to assess the feasibility of DDU-TES because natural geologic conditions provide thermal and hydraulic separation from overlying aquifers that would otherwise sweep away stored heat. Under the Portland Basin, the lower Columbia River Basalt G...
Thermal profile data acquired using Silixa Ultima Distributed Temperature Sensor (DTS) at Cranfield, MS field test
Newly reprocessed Naval Air Station Fallon (1994) seismic lines: pre-stack depth migrations, with interpretations to support the Fallon FORGE (Phase 2B) 3D Geologic model.
Data along seven profiles (>100 km of total profile length) through and adjacent to the Fallon site were re-...
Gravity and aeromagnetic data for West Flank FORGE site.
This project is a component of a broader effort focused on geothermal heating and cooling (GHC) with the aim of illustrating the numerous benefits of incorporating GHC and geothermal heat exchange (GHX) into community energy planning and national decarbonization strategies. To bet...
This is the topical report that wraps up the work and results achieved during Utah FORGE Phase 2C. The zip file includes several folders containing (1) an overview; (2) the results; (3) the lessons learned; and (4) the conclusions. It also contains a folder containing appendices i...
Despite having a large geothermal power potential in the United States, only a small fraction has been developed for power generation. Various barriers, including technical, financial, and regulatory permit delays, are attributed to lower contribution of geothermal energy in the n...
Two ZIP files include Bottom Hole Assembly (BHA) summary data and results for both GLADE East and GLADE West wells in the DJ Basin, Colorado. Files contain bit photos, BHA assembly info, and where available post-run reports or logs for each run in each well. Data is separated int...
This is a compilation of logs and data from Well 14-2 in the Roosevelt Hot Springs area in Utah. This well is also in the Utah FORGE study area.
Data includes: flowmeter survey (1989), geochemistry (1977-1978, 1977-1983), injection test data (1979, 1982), and spinner surveys (19...
Raw EDR (Electronic Drilling Recorder) data for GLADE East and GLADE West wells in the DJ Basin, Colorado. This data was recorded during drilling of both wells and is presented as two zip files. The zip files contain data from different portions of the wells, surface, intermediate...
Data resources were derived from a passive seismic survey of the northern St. Helens Shear Zone on geothermal leases 12-24 km north of Mount St. Helens for phase 2 of the Geothermal Play-Fairway Analysis of Washington State Prospects. A 20 seismic station array of broadband seismo...
This is a zipped GIS compatible shapefile of gravity data points used in the Milford, Utah FORGE project as of March 21st, 2016. The shapefile is native to ArcGIS, but can be used with many GIS software packages. Additionally, there is a .dbf (dBase) file that contains the dataset...
The 3D geologic model for the Fallon for site was constructed in EarthVision software using methods similar to (Moeck et al., 2009, 2010; Faulds et al., 2010b; Jolie et al., 2012, 2015; Hinz et al., 2013a; Siler and Faulds, 2013; Siler et al., 2016a, b) References are included in ...
This zipped data set includes Schlumberger FMI logs DLIS and XML files from Utah FORGE deep well 58-32. These include runs 1 (2226-7550 ft) and 2 (7440-7550 ft). Run 3 (7390-7527ft) was acquired during phase 2C.
Utah FORGE phase 2C Native State Simulation zip contains the data used for the boundary conditions and subsequent native state simulation results obtained using the simulation code FALCON. Data are from the nodes of the simulation domain, with used a uniform 50m spacing over a 250...
Photos and detailed downhole lithology notes for wells CGEH-1 and 74-2 at the West Flank Coso, Ca FORGE location.
This collection includes datasets used for the analyses and modeling of low-temperature geothermal resources in east-central Georgia. This project file includes tabular and geospatial data accessed from publicly available repositories and scholarly and government publications.
This dataset contains experimental data and scanning electron microscope (SEM) images generated during a study on the effects of surface chemistry on the mechanical consolidation of silicate-based geomaterials. The experiments were performed at Sandia National Laboratories in Albu...
These are production logging tests (PLT) results from Halliburton collected during the nine hour circulation test performed at Utah FORGE on April 27th, 2024. The circulation test involved injecting into well 16A(78)-32 and producing out of well 16B(78)-32) and was carried out af...
EMI (Electric Micro Imaging tool, Halliburton) image log in GMI Imager format. GMI Imager is software available from Baker Hughes and is used to open .img files.
Mud logs for wells 83-11, 68-6, 33A-7, 33A-7RD, 52B-7, and 88-1 at West Flank
This dataset contains seismic-reflection records created in 2010 around the Soda Lake geothermal field near Fallon, Nevada. The data was collected by the power plant operator at the time, Magma Energy (CYRQ Energy in 2024). This was a petroleum-industry-quality three-dimensional ...
Sandia National Laboratories partnered with a multi-disciplinary group of subject matter experts to evaluate a stratigraphic geothermal resource in Steptoe Valley, Nevada using both established and novel geophysical imaging techniques. Provided here are a compilation of newly acqu...
CBIL and STAR image logs as pre-processed DLIS files, and mud log of well 83-11
Google Map