Search GDR Data

Utah FORGE: Sanvean Technologies Drilling Data from Well 16B(78)-32

Included here is Sanvean Technologies bit sensor data amalgamated with data from National Oilwell Varco's (NOV) BlackBox tool for Reed Hycalog bits used during drilling of Well 16B(78)-32. The dataset contains information collected at the bit while drilling including rate of penet...

Barker, C. Energy and Geoscience Institute at the University of Utah

Oct 26, 2023
5 Resources
0 Stars
Publicly accessible

Utah FORGE: 2024 Discrete Fracture Network Model Data

The Utah FORGE 2024 Discrete Fracture Network (DFN) Model dataset provides a set of files representing discrete fracture network modeling for the FORGE site near Milford, Utah. The dataset includes four distinct DFN model file sets, each corresponding to different time frames and ...

Finnila, A. and Jones, C. Energy and Geoscience Institute at the University of Utah

Sep 08, 2024
5 Resources
0 Stars
Curated

Utah FORGE: Milford Digitized Geophysical Logs from Acord 1

This submission includes digitalized versions of the following: McCulloch Geothermal Corp Acord 1-26 Cover Letter McCulloch Geothermal Corp Acord 1-26 Drilling Plan McCulloch Geothermal Corp Acord 1-26 Bond Documents Division of Water Rights Permission to Drill Drillers Log Geot...

Jones, C. and Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 31, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Temperature Contours at 200 m

The individual shapefiles in this dataset delineate estimated temperature contours (20, 40, 60, and 80 deg C) at a depth of 200 m in the Milford, Utah FORGE area. Contours were derived from 86 geothermal, gradient, and other wells drilled in the area since the mid-1970s with dept...

Moore, J. Energy and Geoscience Institute at the University of Utah

Feb 01, 2016
7 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results February 2025

This dataset contains results from nine triaxial direct shear tests conducted by Los Alamos National Laboratory on samples from FORGE Well 16A(78)-32. The primary objectives of this work were to determine the shear strength in both intact and residual states, evaluate dilation aga...

Frash, L. et al Los Alamos National Laboratory

Feb 28, 2025
1 Resources
0 Stars
Curated

Utah FORGE: EGS Reservoir Produced Fluids Geochemistry 2022-2024

This dataset contains geochemical analyses of produced fluids from the Utah FORGE site, specifically from wells 16A(78)-32, 16B(78)-32, and 58-32, collected during various stimulation, flowback, and circulation tests conducted between 2022 and 2024. The data contains element conce...

Simmons, S. et al Energy and Geoscience Institute at the University of Utah

Feb 26, 2025
1 Resources
0 Stars
Curated

Utah FORGE: Well 58-32 Stimulation Data

Pressure, temperature, and flow data from open-hole, upper perforation, and lower perforation well stimulations gathered from various tools collected at well 58-32 during phase 2C.

Best, S. Geothermal Resource Group

Apr 20, 2019
16 Resources
0 Stars
Publicly accessible

Utah FORGE: Reports on Northwestern Nevada Well Doublet Drilling and Testing by Fervo Energy

These reports review Fervo Energy's construction of a commercial enhanced geothermal system (EGS). Fervo has qualified full functionality of the system through production testing at commercially relevant operating conditions. The project site is located in a nearfield setting ad...

Dadi, S. et al Fervo Energy

Sep 05, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results

This submission contains a report and associated data from triaxial direct shear tests conducted by Los Alamos National Laboratory. The samples used were sourced from 16A(78)-32 well core. The primary objectives of this test were to determine the shear strength in both intact an...

Frash, L. et al Los Alamos National Laboratory

Aug 14, 2023
2 Resources
0 Stars
Curated

Utah FORGE: Seismic and Other Shapefiles from the Roosevelt Hot Springs Area

Three shapefiles in this submission show the position of proposed seismic line surveys. The mid-crustal velocity anomaly file shows the extent of an anomalously low P-wave velocity zone in the subsurface. Two other files show the extent of known hydrothermal systems in the Rooseve...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 22, 2016
7 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Simulations for Distributed Acoustic Sensing Strain Signatures as an Indicator of Fracture Connectivity

This dataset encompasses simulations of strain signatures from both hydraulically connected and "near-miss" fractures in enhanced geothermal systems (EGS). The files and results are presented from the perspective of digital acoustic sensing's (DAS) potential to differentiate the t...

Ward-Baranyay, M. et al Rice University

Jan 01, 2023
4 Resources
0 Stars
Curated

Utah FORGE: Well 16B(78)-32 Drill Core Fracture Analysis Images and Data

This dataset contains drilling core data from well 16B(78)-32, including PDF documents with flattened core images annotated by feature type and core interval, as well as spreadsheets detailing feature morphologies by depth, planar feature measurements, and planar feature orientati...

Jones, C. Energy and Geoscience Institute at the University of Utah

Jan 29, 2025
1 Resources
0 Stars
Curated

Utah FORGE: Phase 3 Magnetotelluric (MT) Data

New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...

Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah

Oct 01, 2020
5 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Well 16B(78)-32 Field-Test Data from Mini-Frac Tests

This submittal includes the field-test data collected during stress tests conducted in the Utah FORGE 16B(78)-32 wellbore to measure/characterize the stresses in the geothermal reservoir. The type of stress test performed is referred to as a mini-frac test or a micro-frac test. Th...

Kelley, M. et al Battelle Memorial Institute

Jul 02, 2023
4 Resources
0 Stars
Curated

Utah FORGE: 2023 Large Upscaled Discrete Fracture Network Models

This dataset includes the data and a report on the large upscaled discrete fracture network modeling done for the Utah FORGE project in 2023. The FORGE modeling team is making five discrete fracture network (DFN) realizations of a large reservoir model available to researchers. Th...

Finnila, A. Energy and Geoscience Institute at the University of Utah

Oct 02, 2023
17 Resources
0 Stars
Publicly accessible

Shallow (2-meter) Temperature Surveys in Colorado

Shallow temperature surveys are useful in early-stage geothermal exploration to delineate surface outflow zones, with the intent to identify the source of upwelling, usually a fault. Detailed descriptions of the 2-meter survey method and equipment design can be found in Coolbaugh ...

E., R. Flint Geothermal, LLC

Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Direct Shear Test Data for Investigating Seismic Precursors to Shear Failure of Fractures

This dataset includes results of direct shear tests to investigate the mechanical and geophysical response of dry and saturated fractures in Indiana limestone and Sierra White granite. Direct shear tests were performed on tensile-induced fractures in Indiana limestone and Sierra W...

Han, K. et al Purdue University

Jun 11, 2024
2 Resources
0 Stars
Curated

Utah FORGE: Raw Microgravity Composite Data Updated 10/2021

This is a microgravity dataset from the Utah FORGE site near Milford, Utah. This composite dataset was updated in October, 2021 and contains data from December 17th, 2018 through September 24th, 2021. The data includes the GPS location of the measurement, date of the measurement, ...

Hardwick, C. Utah Geological Survey

Oct 01, 2021
1 Resources
0 Stars
Curated

Utah FORGE: Composite Raw Gravity Data 2021

This is a composite raw gravity dataset of the Utah FORGE area taken over time from December 2018 to to June 2021. The data shows differences in local gravity at different location across Utah FORGE. Included with the gravity data is the NAD83 UTM coordinates of each station in me...

Hardwick, C. Utah Geological Survey

Jun 04, 2021
1 Resources
0 Stars
Curated

Utah FORGE: Groundwater Levels Updated 2021

Contains Utah FORGE ground water data for wells WOW2 and WOW3. The data was updated on October 5th, 2021 and contains legacy data. Groundwater data includes the level, offset, date, and time for each measurement. Temperature, drift, water elevation and other parameters are recorde...

Kirby, S. Energy and Geoscience Institute at the University of Utah

Oct 05, 2021
1 Resources
0 Stars
Curated

Utah FORGE: Geologic, Topographic, and Other Related Maps and GIS Data from the Earth Model

This submission contains a number of maps and shapefiles related to the Utah FORGE site. Examples include geologic maps (several variations) and GIS data for the Utah FORGE site outline. All data are georeferenced to UTM, zone 12N, NAD 83, NAVD 88.

Podgorney, R. et al Idaho National Laboratory

Dec 07, 2018
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Area Terrain Slope Data

This archive contains a terrain slope image, in units of degrees, of the Utah FORGE area near Roosevelt Hot springs. The data was derived from 0.5 m resolution LiDAR DEM data and is in a GeoTiff format. It was processed using ArcGIS.

Nash, G. Energy and Geoscience Institute at the University of Utah

Dec 10, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Soil Carbon Dioxide Data

These are data from soil CO2 flux surveys done in the Utah FORGE study area near Roosevelt Hot Springs. Concentration is in units of ppm and is the final concentration of CO2 in the chamber after the up-to-2-minute flux measurement. Flux is in units of grams of CO2 per m^2.

Rahilly, K. Energy and Geoscience Institute at the University of Utah

Mar 12, 2018
1 Resources
0 Stars
Publicly accessible

Cape EGS: Frisco Pad Wells Flow Test Microseismic Data

This dataset contains microseismic data acquired during the Frisco pad flow test project led by Fervo Energy, conducted between July 17th Aug 12th 2024, near the Utah FORGE geothermal site. The microseismic data was collected from various Utah FORGE wells: via Distributed Acoustic...

Dadi, S. and Kanu, O. Fervo Energy

Nov 06, 2024
5 Resources
0 Stars
Curated

Utah FORGE: Area LiDAR Bare Earth DEM Mosaic

This is a mosaic of 154 bare earth DEM panels (0.5 m resolution) acquired during Phase II of the Utah FORGE project. The DEM covers the western Mineral Mountains and adjoining basin including the Roosevelt Hot Springs area. The coordinates are in UTM Zone 12, NAD 83 and elevation ...