Search GDR Data
Showing results 1 - 25 of 87.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
A set of triaxial tests with sandstone, limestone, and granite samples was conducted to measure fluid chemistry before, during, and after rock fracture. The dataset here includes: 1) five triaxial test data files (xlxs), 2) one file containing the measured test tube volumes for th...
Mesh, properties, initial conditions, injection/withdrawal rates for modeling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, on ...
This dataset contains results from controlled shear reactivation experiments performed on cylindrical Westerly and granitoid granite samples with a single inclined fracture. Laboratory faults were pre-loaded near failure and reactivated by fluid injection to examine relationships ...
This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. Thi...
This dataset contains a three-dimensional native-state numerical model of the Utah FORGE site, updated in 2025, representing thermal, hydraulic, and stress conditions within the granitic reservoir and overlying sedimentary formations. The model domain extends 6 km by 6 km laterall...
To reduce the geothermal exploration risk, a feasibility study is performed for a deep direct-use system proposed at the West Virginia University (WVU) Morgantown campus. This study applies numerical simulations to investigate reservoir impedance and thermal production. Because of...
This submission contains the presentation slides and recordings from the first 98 EGS Collab Modeling and Simulation Working Group teleconferences. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field activities and resul...
This dataset includes updated temperature and pressure logs for Utah FORGE wells 56-32, 78-32, and 58-32. This data was acquired in June 2021.
This dataset consists of Baker Hughes Pressure-Temperature gauge readings on fiber optics in Utah FORGE Well 16B(78)-32. This gauge is at a measured depth of 7,056.67 feet. The true vertical depth can be determined from the well survey data, which is linked below. The data consis...
This package includes data from two days of testing at the Sanford Underground Research Facility (SURF) on the 4100 level. The tests were performed in borehole TV4100 in the battery charging alcove south of the Yates shaft. TV4100 is a vertical borehole ~50 meters deep. A series o...
This archive consists of a pdf graphic log and a LAS text file representing the results of the pressure and temperature logs measured on Nov. 8th, 2018 from the Utah FORGE deep test well 58-32 (MU-ESW1). The logs were taken by DI Drill Survey Services.
These data were collected in the laboratory located at California State University Long Beach. They consist of DAS data collected from a fiber optic cable placed in a tank of water, subjected to oscillating head. These tests are described in the article linked below.
This dataset contains wellhead pressure measurements for Utah FORGE wells 16A(78)-32 and 16B(78)-32 during two distinct shut-in periods. The first spans from September 2024 to April 2025, covering the interval between the conclusion of a 28-day circulation test and the start of a ...
The experimental data obtained in this project is the thermal stability data of various foams measured using the setup established at Temple University during this study. The setup is installed with a portable digital camera which can take images and videos of foam evolution at a ...
Temperature logs, pressure logs, directional survey, well history, well bore schematic, and other reports for well 74-2TCH at West Flank FORGE
This dataset consists of all of the pressure pumping data for Utah FORGE Well16A78-32 fracturing stages, Well 16B78-32 fracturing stages, and a 9-hour circulation test which took place after all of the frac plugs were drilled out. Fracturing in the wells took place in stages from ...
Temperature logs, pressure logs, directional survey, well history, well bore schematic, and other reports for well 48-11TCH at West Flank FORGE
This dataset encompasses the collected data and associated reports from the low-rate injection circulation test conducted on wells 16A(78)-32 and 16B(78)-32 in July 2023 at Utah FORGE. It includes comprehensive raw circulation data, captured by Pason and Schlumberger (SLB). The da...
This dataset contains high-pressure ultrasonic measurements on a foliated granitoid core from Well 16B(78)-32 at the Utah FORGE site. Ultrasonic P-waves and two orthogonal S-waves were measured concurrently parallel and perpendicular to the rock fabric. All measurements were mad...
Pressure, temperature, and flow data from open-hole, upper perforation, and lower perforation well stimulations gathered from various tools collected at well 58-32 during phase 2C.
The EGS Collab experiment 2 was focused on testing shear stimulation techniques. Shear stimulation, in this case, means using hydraulic pressure to cause shear slip on preexisting fracture or fault planes such that the hydraulic conductivity of the fracture or fault increases. The...
The Newberry Volcano EGS Demonstration in central Oregon, a 5 year project begun in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry well (NWG 55-29) drilled in 2008. First, the stimulation pumps used were designed to ru...
This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. T...
This repository contains the electrical resistivity tomography (ERT) monitoring data that was collected before, during, and after shear stimulation attempts were conducted at EGS Collab. These tests were carried out on the SURF 4100 level during Experiment 2 in March, 2022. Flow a...
This is a final technical report for the project: Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems (EGS). The goal is to demonstrate the feasibility of foam fracturing in EGS applications. The project, led by Oak Ridge National Laboratory (ORNL), wa...
Google Map