Search GDR Data

Grain-Scale Failure in Thermal Spallation Drilling

Geothermal power promises clean, renewable, reliable and potentially widely-available energy, but is limited by high initial capital costs. New drilling technologies are required to make geothermal power financially competitive with other energy sources. One potential solution is ...

Walsh, S. et al Lawrence Livermore National Laboratory

Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: LBNL Status Report on the VEMP Tool 2024

This report describes the modifications made to the Vertical Electromagnetic Profiling (VEMP) borehole tool, currently on loan to Lawrence Berkeley National Laboratory (LBNL) from Japan's Geothermal Energy Research and Development Co., Ltd. (GERD), during its refurbishment. It inc...

Wilt, M. et al Lawrence Berkeley National Laboratory

Feb 16, 2024
1 Resources
0 Stars
Publicly accessible

Fallon FORGE: Analogue Outcrop Samples

Compilation of results for mechanical and fluid flow properties of analogue outcrop samples experimental data for compressional and shear wave velocities, tensile strengths, and compressive strengths. Outcrop location and sample orientation data are documented in a separate csv file.

Blankenship, D. et al Sandia National Laboratories

Mar 12, 2018
2 Resources
0 Stars
Publicly accessible

NTB (Non-technical Barriers) Interviews with Geothermal Stakeholders for Geothermal Development in the Salton Sea.

Non-technical barriers to deploying geothermal electricity projects in the United States can create significant delays and other challenges, leading to higher project risk and costs, lost opportunities to access policy incentives, and ultimately decreased competitiveness against o...

Levine, A. and Smith, L. National Renewable Energy Laboratory

Oct 01, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Video of Utah FORGE Drilling Planning for Production Well 16B(78)-32

This is a YouTube video containing the specifics of well planning for Utah FORGE 16B(78)-32. This well will be drilled as a doublet approximately 300 feet parallel to and above 16A(78)-32 and will be drilled between approximately April 15th and July 17th 2023.

McLennan, J. Energy and Geoscience Institute at the University of Utah

Mar 03, 2023
2 Resources
0 Stars
Publicly accessible

Coordinating Permit Offices and the Development of Utility-Scale Geothermal Energy

This study examines various forms of coordinating permit offices at the state and federal level in the western United States, discusses inefficiencies and mitigation techniques for permitting natural resource projects, analyzes whether various approaches are easily adaptable to ut...

Young, K. et al National Renewable Energy Laboratory

Sep 30, 2013
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Preliminary Monitoring, Analyses, and Impact Assessment

Preliminary monitoring and analyses for the Utah FORGE Milford Site. Includes a report detailing the seismic monitoring goals and results, a detailed techno-economic infrastructure assessment with an analysis, a budget, schedules, and cost summaries, and a summary of environmental...

Pankow, K. Energy and Geoscience Institute at the University of Utah

Feb 09, 2017
3 Resources
0 Stars
Publicly accessible

The Convergence of Heat, Groundwater, & Fracture Permeability: Innovative Play Fairway Modeling Applied to the Tularosa Basin Project Report

This report details all of the work done in Phase 2 of a geothermal exploration project in Tularosa Basin, New Mexico. Data acquired as part of Phase 2 includes field geology (geological reconnaissance and mapping), gravity surveys, shallow temperature surveys, well water sampling...

Nash, G. et al Energy and Geoscience Institute at the University of Utah

May 31, 2017
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Mineral Mountains West Fault System Report

This archive contains a report on the Mineral Mountains West fault system as part of phase 2C and the evidence for the northern terminus of this structure. Geologic field mapping, reprocessing of 3D seismic reflection data, and soil gas surveys contributed to this effort.

Simmons, S. and Miller, J. Energy and Geoscience Institute at the University of Utah

Jul 01, 2019
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Microseismic Events

This archive contains Excel spreadsheets containing microseismic events detected in the study area during Utah FORGE Phase 2C. The Readme file included that describes the meaning of the abbreviations used as field headers in the spreadsheets. Additionally, there is a .dat (text) f...

Rutledge, J. Energy and Geoscience Institute at the University of Utah

Jul 08, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Seismic Activity from April, 2019

This dataset contains seismic event detections acquired using the 151 Nodal geophones deployed at the Utah FORGE site in April 2019. Details regarding the publishing are available in the paper linked below (Mesimeri, M. and K. L. Pankow et al. 2020). A frequency-domain-based algor...

Pankow, K. University of Utah Seismograph Stations

May 01, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 (MU-ESW1) FMI Log Fracture Results

A Schlumberger Fullbore Formation Micro-Imager (FMI) log was run from 7390 feet to 7527 feet depth in well 58-32, originally known as well MU-ESW1. Well 58-32 was completed in 2017 as part of Utah FORGE Phase 2. It reached a depth of 7536 feet and recorded a bottom hole temperatur...

BLOCHOWICZ, A. Energy and Geoscience Institute at the University of Utah

Mar 06, 2021
1 Resources
0 Stars
Publicly accessible

PetroQuip Engineering Design and Specification Document for LBP and LP

This document provides the applications, specifications, testing, materials, and running methods for the engineering team at PertoQuip to design the Locking Bridge Plug (LBP) and the Landing Profile (LP). This is the first step in developing a new tool for. The report includes ap...

Coon, R. PetroQuip Energy Services

Feb 09, 2022
1 Resources
0 Stars
Publicly accessible

Community Geothermal: Mechanical, Electrical, and Plumbing Design Report and Drawings Wallingford, CT

Included here are the mechanical, electrical, and plumbing design report and drawings for the proposed community geothermal system at an affordable housing complex in Wallingford, Connecticut. The report and drawings were developed by LN Consulting, in partnership with the Univers...

Donahue, I. Connecticut Department of Energy and Environmental Protection (CT DEEP)

Jul 31, 2024
2 Resources
0 Stars
Curated

COMSOL Models and Simulation Results for Closed-Loop Geothermal Systems with Thermal Enhancements

The Closed-Loop Geothermal Working Group and the National Renewable Energy Laboratory (NREL) have studied the performance of disc-shaped and linear thermal enhancements (conductive material introduced around a wellbore) in closed-loop geothermal systems. COMSOL models were develop...

Beckers, K. et al National Renewable Energy Laboratory

Dec 15, 2023
4 Resources
0 Stars
Publicly accessible

GeoRePORT Case Studies Coso, WSMR, Dixie Valley, and Chena Hot Springs

The Geothermal Resource Portfolio Optimization and Reporting Technique (GeoRePORT) was developed with funding from the U.S. Department of Energy Geothermal Technologies Office to assist in identifying and pursuing long-term investment strategies through the development of a resour...

Kolker, A. et al National Renewable Energy Laboratory

Sep 30, 2019
6 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Economic Analysis using GEOPHIRES for West Virginia University

This dataset contains all the inputs used and output produced from the modified GEOPHIRES for the economic analysis of base case hybrid GDHC system, improved hybrid GDHC system with heat pump and for hot water GDHC. Software required: Microsoft Notepad, Microsoft Excel and GEOPHI...

Garapati, N. West Virginia University

Jan 09, 2020
8 Resources
0 Stars
Publicly accessible

Harsh Environment Sensors for Geothermal Applications

Technical papers detailing the development of harsh environment sensors for geothermal applications. Principle Investigator is Prof. Albert P. Pisano (University of California, Berkeley). Submission includes a paper about geothermal environmental exposure testing on encapsulant a...

Senesky, D. et al Regents of the University University of California

Jan 01, 2012
2 Resources
0 Stars
Publicly accessible

Fallon FORGE: Distinct Element Reservoir Modeling

Archive containing input/output data for distinct element reservoir modeling for Fallon FORGE. Models created using 3DEC, InSite, and in-house Python algorithms (ITASCA). List of archived files follows; please see 'Modeling Metadata.pdf' (included as a resource below) for addition...

Blankenship, D. et al Sandia National Laboratories

Mar 12, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: GPS Data Deformation Monitoring

This data bundle contains raw GPS data files and resulting data using Trimble Business Center and NOAA OPUS to process the GPS data in spreadsheets with station coordinates and elevations. A map of station locations is included along with the final processing report which includes...

Erickson, B. and McKean, A. Energy and Geoscience Institute at the University of Utah

Jun 24, 2019
2 Resources
0 Stars
Publicly accessible

GDR Data Management and Best Practices for Submitters and Curators

Resources for GDR data submitters and curators, including training videos, step-by-step guides on data submission, and detailed documentation of the GDR. The Data Management and Submission Best Practices document also contains API access and metadata schema information for develo...

Weers, J. et al National Renewable Energy Laboratory

Mar 31, 2021
3 Resources
1 Stars
Publicly accessible

Utah FORGE: Deep Wells Water and Gas Sampling with Analyses by ThermoChem (October, 2022)

This data includes a document that describes the effort to collect and analyze water and gas samples from deep Utah FORGE wells 16A(78)-32, 58-32, 56-32 and 78B-32 along with additional pdf files showing ThermoChem's analyses attached as an appendix.

Joness, C. Energy and Geoscience Institute at the University of Utah

Oct 26, 2022
2 Resources
0 Stars
Curated

Utah FORGE: Neubrex Well 16A(78)-32 Stimulation Crosswell RFS Fiber Optic Monitoring Report April, 2024

This report documents the use of fiber optic Rayleigh frequency shift (RFS) Distributed Strain, Distributed Temperature and Micro seismic recorded during the hydraulic fracture stimulation of well 16A, as detected in the offset well 16B(78)-32 in April 2024. The report reviews th...

Jurick, D. et al Neubrex Energy Services (US), LLC

Apr 03, 2024
1 Resources
0 Stars
In curation

Appalachian Basin Temperature-Depth Maps and Structured Data in support of Feasibility Study of Direct District Heating for the Cornell Campus Utilizing Deep Geothermal Energy

This dataset contains shapefiles and rasters that summarize the results of a stochastic analysis of temperatures at depth in the Appalachian Basin states of New York, Pennsylvania, and West Virginia. This analysis provides an update to the temperature-at-depth maps provided in the...

Smith, J. Cornell University

Oct 29, 2019
6 Resources
0 Stars
Publicly accessible

Geothermal Project Database Supporting Barriers and Viability Analysis for Development by 2020 Timeline

This data provides the underlying project-level analysis and data sources complied in response to the DOE request to determine the amount of geothermal capacity that could be available to meet the President's request to double renewable energy capacity by 2020. The enclosed dat...

Wall, A. and Young, K. National Renewable Energy Laboratory

Oct 21, 2014
2 Resources
0 Stars
Publicly accessible

<< Previous 2 3 4 5 6 7 8 9 10 11 Next >>