Search GDR Data

Magnetotelluric Data Collected in 2016 over the San Emidio Geothermal Field in Nevada

This data set includes the magnetotelluric (MT) data collected from October 21 to November 9, 2016 over the San Emidio geothermal field in Nevada by Quantec Geoscience USA Inc. on behalf of US Geothermal Inc. as part of a project entitled "A Novel Approach to Map Permeability Usi...

Folsom, M. et al Ormat Technologies, Inc.

Nov 09, 2016
11 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Common Discrete Fracture Network

This package includes data and models that support hydraulic fracture stimulation and fluid circulation experiments in the Sanford Underground Research Facility (SURF). A paper by Schwering et al. (2020) describes the deterministic basis for developing a "common" discrete fracture...

Schwering, P. et al Sandia National Laboratories

Sep 18, 2019
4 Resources
0 Stars
Publicly accessible

Community Geothermal: Mechanical, Electrical, and Plumbing Design Report and Drawings Wallingford, CT

Included here are the mechanical, electrical, and plumbing design report and drawings for the proposed community geothermal system at an affordable housing complex in Wallingford, Connecticut. The report and drawings were developed by LN Consulting, in partnership with the Univers...

Donahue, I. Connecticut Department of Energy and Environmental Protection (CT DEEP)

Jul 31, 2024
2 Resources
0 Stars
Curated

Utah FORGE: Phase 3 Magnetotelluric (MT) Data

New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...

Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah

Oct 01, 2020
5 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Curated

New River Geothermal Exploration (Ram Power Inc.)

The New River Geothermal Exploration (DOE Award No. EE0002843) is located approximately 25km south of the Salton Sea, near town of Brawley in Imperial County and approximately 150km east of San Diego, California. A total of 182 MT Logger sites were completed covering the two sepa...

Mirza, R. and Data, E. Ram Power, Inc.

Nov 15, 2013
20 Resources
0 Stars
Publicly accessible

Active Source 3D Seismic Tomography of Brady Hot Springs Geothermal Field, Nevada

We deployed a dense seismic array to image the shallow structure in the injection area of the Brady Hot Springs geothermal site in Nevada. The array was composed of 238 5 Hz, three-component nodal instruments and 8,700 m of distributed acoustic sensing (DAS) fiber-optic cable inst...

Parker, L. University of Wisconsin

Aug 09, 2017
1 Resources
0 Stars
Publicly accessible

Community Geothermal: Community Thermal Energy Network Report and Design Drawings Carbondale, CO

This dataset provides an overview of the design, development, and technical specifications of for a community-scale geothermal heating and cooling system in Carbondale, Colorado. This thermal energy network (TEN) within the town's Three-Two Zero Energy District (32ZED) is part of ...

Fox-Rubin, J. Clean Energy Economy for the Region (CLEER)

Sep 30, 2024
2 Resources
0 Stars
In curation

DEEPEN: Newberry Volcano MT and Gravity Data 2022 and 2023 Acquisition and Processing

As part of DEEPEN (DE-risking Exploration of geothermal Plays in magmatic ENvironments), a 3D play fairway analysis (PFA) was conducted at Newberry Volcano in Central Oregon for multiple play types (conventional hydrothermal, superhot EGS, and supercritical). For use in this PFA, ...

Shultz, A. et al Enthalpion Energy

Jun 30, 2023
8 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone

Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...

Um, E. et al Lawrence Berkeley National Laboratory

Feb 06, 2023
4 Resources
0 Stars
Curated

Exploration Best Practices on OpenEI

This is an electronic database detailing different types of, various phases of, best practices for, and cost and time associated with geothermal exploration techniques. The groups of exploration techniques included in the database are Data and Modeling Techniques, Downhole Techniq...

Young, K. National Renewable Energy Laboratory

Sep 20, 2013
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Hydraulic Fracture Width Determination Using Stoneley Wave Pressure Testing and Electrical Borehole Scans

This report provides insights into Utah FORGE well 58-32's hydraulic fractures. It utilizes both electrical borehole scans from Schlumberger's Formation Micro-scanner Image tool (FMI) and Stoneley waves from a borehole sonic tool. These methods are combined in a comprehensive work...

Hornby, B. Hornby Geophysical Services, LLC

Oct 06, 2023
1 Resources
0 Stars
Publicly accessible

MT Survey on the Glass Buttes Geothermal Exploration Project in Lake County, Oregon

Zonge Geosciences, Inc. performed a magnetotelluric (MT) survey for the Glass Buttes Project at the request of Ormat Technologies Inc. during the period of 7 October 2010 to 8 November 2010. This report provides the deep electromagnetic data and methods that were used to assist O...

Akerley, J. Ormat Nevada Inc

Nov 08, 2010
1 Resources
0 Stars
Publicly accessible

Analyzed Boise Data for Oscillatory Hydraulic Tomography

Data here has been "pre-processed" and "analyzed" from the raw data submitted to the GDR previously (raw data files found at http://gdr.openei.org/submissions/479. doi:10.15121/1176944 after 30 September 2017). First, we submit .mat files which are the "pre-processed" data (must h...

Lim, D. University of Wisconsin

Jul 01, 2015
8 Resources
0 Stars
Publicly accessible

Directional Cooling-Induced Fracturing Westerly Granite Test Results

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on a short, cylindrical sample of Westerly granite (diameter = 4 inches, height ~ 2 inches). Liquid nitrogen was poured in a copper cup attached to the top of the sample, and the resulting acoustic emissions ...

Nakagawa, S. Lawrence Berkeley National Laboratory

Dec 18, 2020
5 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: 3D Seismic Velocity Model and Updated Microseismic Catalog Using Transfer-Learning Aided Double-Difference Tomography

This package contains a 3D Seismic velocity model and an updated microseismic catalog associated with a proceedings paper (Chai et al., 2020) published in the 45th Workshop on Geothermal Reservoir Engineering. The 3D_seismic_velocity_model text file contains x (m), y(m), z(m), P-w...

Chai, C. et al Oak Ridge National Laboratory

Apr 20, 2020
7 Resources
0 Stars
Curated

Deep Direct-Use Feasibility Study Computed Tomography (CT)-scanned data Analysis for the Tuscarora Sandstone at the National Energy Technology Laboratory

The computed tomography (CT) facilities at the National Energy Technology Laboratory (NETL) Morgantown, West Virginia site were used to characterize core of the Tuscarora Sandstone from a vertical well in Preston County WV, the Preston-119 from a depth of 7,165 to 7,438 ft. The pr...

Brown, S. et al West Virginia University

Jan 10, 2020
11 Resources
0 Stars
Publicly accessible

Snake River Plain FORGE: Site Characterization Data

The site characterization data used to develop the conceptual geologic model for the Snake River Plain site in Idaho, as part of phase 1 of the Frontier Observatory for Research in Geothermal Energy (FORGE) initiative. This collection includes data on seismic events, groundwater,...

Moos, D. and Barton, C. Idaho National Laboratory

Apr 18, 2016
49 Resources
0 Stars
Curated

Wister, CA Downhole and Seismic Data

This submission contains Downhole geophysical logs associated with Wister, CA Wells 12-27 and 85-20. The logs include Spontaneous Potential (SP), HILT Caliper (HCAL), Gamma Ray (GR), Array Induction (AIT), and Neutron Porosity (NPOR) data. Also included are a well log, Injection T...

Akerley, J. Ormat Nevada Inc

Dec 18, 2010
16 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone

This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE site. Boreholes will be electrically energized and will serve as data sources for future proposed electromagnetic bore...

Um, E. et al Lawrence Berkeley National Laboratory

Nov 15, 2022
4 Resources
0 Stars
Curated

Project HOTSPOT: Mountain Home Well Borehole Geophysics Database

The Snake River Plain (SRP), Idaho, hosts potential geothermal resources due to elevated groundwater temperatures associated with the thermal anomaly Yellowstone-Snake River hotspot. Project HOTSPOT has coordinated international institutions and organizations to understand subsurf...

Shervais, J. Utah State University

Nov 11, 2012
33 Resources
0 Stars
Publicly accessible

Raw Pressure Data from Boise Hydrogeophysical Research Site (BHRS)

Pressure data from a phreatic aquifer was collected in the summer of 2013 during Multi-frequency Oscillatory Hydraulic Tomography pumping tests. All tests were performed at the Boise Hydrogeophysical Research Site. The data will be inverted using a fast steady-periodic adjoint-bas...

Lim, D. University of Wisconsin

Jul 17, 2013
20 Resources
0 Stars
Publicly accessible

PoroTomo Distributed Temperature Sensing (DTS) Measurements made in Brady Observation Well 56-1

This submission is a follow-up to Distributed Temperature Sensing (DTS) measurements made in Brady observation well 56-1 during the PoroTomo field experiment conducted in March, 2016. The measurements in this data set were made on August 24, 2018 over an approximately 20 hour per...

Kratt, C. et al Oregon State University

Jan 09, 2019
6 Resources
0 Stars
Publicly accessible

Thermoelectric Materials Development for Low Temperature Geothermal Power Generation

Data includes characterization results for novel thermoelectric materials developed specifically for power generation from low temperature geothermal brines. Materials characterization data includes material density, thickness, resistance, Seebeck coefficient. This research was ca...

Hansen, T. Southern Research Institute

Jan 29, 2016
3 Resources
0 Stars
Publicly accessible

EGS Collab: Modeling and Simulation Working Group Teleconference Series (1-98)

This submission contains the presentation slides and recordings from the first 98 EGS Collab Modeling and Simulation Working Group teleconferences. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field activities and resul...

White, M. et al Pacific Northwest National Laboratory

Feb 04, 2020
100 Resources
0 Stars
Publicly accessible

1 2 3 Next >>