Search GDR Data

Showing results 1 - 25 of 281.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Technologies
Featured Projects
Topics
Data Type
"high temperature drilling motor"×
Document×

Operational Performance Requirements For Motor Power Sections Used in Geothermal Drilling Based Upon Minimum Specific Energy

Operational performance requirements are needed to support development of specifications for downhole motor power sections to be used for drilling hard rock during geothermal wellbore construction. Theoretical torque specifications are derived based upon a widely-accepted rock-re...
Raymond, D. Sandia National Laboratories
Sep 10, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Sanvean Technologies Drilling Data from Well 16B(78)-32

Included here is Sanvean Technologies bit sensor data amalgamated with data from National Oilwell Varco's (NOV) BlackBox tool for Reed Hycalog bits used during drilling of Well 16B(78)-32. The dataset contains information collected at the bit while drilling including rate of penet...
Barker, C. Energy and Geoscience Institute at the University of Utah
Oct 26, 2023
5 Resources
0 Stars
Publicly accessible

OM300 Direction Drilling Module

OM300 Geothermal Direction Drilling Navigation Tool A prototype directional drilling navigation tool capable of high temperature operation in geothermal drilling with: Accuracies of 0.1 degree Inclination and Tool Face, 0.5 degree Azimuth Environmental Ruggedness typical of existi...
MacGugan, D. Honeywell International, Inc.
Aug 22, 2013
3 Resources
0 Stars
Publicly accessible

Testing LCM on a Large Scale for Geothermal Drilling Applications Using a Novel Experimental Setup

Rheology data obtained from flow loop tests, performed using different lost circulation materials (LCM) to study their effect on fluid rheology and wellbore hydraulics. The sealing performance of different LCM was tested using different fracture sizes. Five academic papers / repor...
Mohamed, A. et al University of Oklahoma
Apr 22, 2022
10 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 56-32 Drilling Data and Logs

This dataset consists of drilling data (Pason data spreadsheets, daily reports, days v. depth, mud logs), Schlumberger logs (FMI, shear anisotropy analysis, memory, sonic, array induction/spectral density/dual spaced neutron/gamma ray/caliper, spectral GR/temperature, and Gardner ...
Bristol, J. et al Energy and Geoscience Institute at the University of Utah
Mar 19, 2021
18 Resources
0 Stars
Publicly accessible

Data of High-Temperature Dynamic LCM Testing Setup

Data from high temperature dynamic sealing tests for various fracture widths, at various temperatures (degrees F), with 5 wt.% bentonite-based mud containing various material fiber contents, at 100 to 400 psi differential pressure. Data from pressure test and evaluation of the dy...
Magzoub, M. et al University of Oklahoma
May 31, 2021
11 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Logs

This dataset contains all well logs from Utah FORGE well 16A(78)-32. This includes the mud log, Sanvean Technologies logs, and Schlumberger logs. Please see the file descriptions below for information about each log.
Gilmour, B. et al Energy and Geoscience Institute at the University of Utah
Mar 08, 2021
7 Resources
0 Stars
Publicly accessible

SGW paper Rheological Properties of Drilling Fluids Containing Special Additives for Geothermal Drilling Applications

The paper was presented at the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 15-17, 2021. In this study, the effectiveness of different additives was evaluated in maintaining drilling fluid rheology at HPHT(high pressure and...
Mohamed, A. et al University of Oklahoma
Jan 04, 2023
1 Resources
0 Stars
Publicly accessible

High-Pressure and High-Temperature (HPHT) Lost Circulation Material (LCM) Testing

High-pressure and high-temperature (HPHT) lost circulation material (LCM) rheology test results, LCM particle size distributions (PSD) analysis, and HPHT LCM fluid loss test results. Three academic papers / reports derived from this research are also presented.
Salehi, S. and Vivas, C. University of Oklahoma
Nov 30, 2021
6 Resources
0 Stars
Publicly accessible

Simulation Tools for Modeling Thermal Spallation Drilling on Multiple Scales

Widespread adoption of geothermal energy will require access to deeply buried resources in granitic basement rocks at high temperatures and pressures. Exploiting these resources necessitates novel methods for drilling, stimulation, and maintenance, under operating conditions that ...
Walsh, S. et al Lawrence Livermore National Laboratory
Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Pressure Sensor and Telemetry Methods for Measurement while Drilling in Geothermal Wells

Project status report as of end of 2011. Key milestones and accomplishments in the year 2011 include: Proof of feasibility of analog and digital components with their lifetime tested for more than 500 hours at 300 degrees C, Demonstration of ceramic-based packaging capable of su...
Vert, A. GE Global Research
Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Stability of Elastomers Subjected to Geothermal Well-Like Conditions

The aim of this study is to understand how commercially available elastomers perform under geothermal well-like conditions and make recommendations to the community based on these results. This poster highlights the mechanical performance of several elastomers (including EPDM, Vit...
Redline, E. et al Sandia National Laboratories
Aug 10, 2014
1 Resources
0 Stars
Publicly accessible

Snake River (Idaho) Geothermal Drilling Project: Innovative Approaches to Geothermal Exploration

The goal of our project was to test innovative exploration technologies using existing and new data, and to ground-truth these technologies using slim-hole core technology. The slim-hole core allowed us to understand subsurface stratigraphy and alteration in detail, and to correla...
Shervais, J. et al Utah State University
Feb 21, 2014
1 Resources
0 Stars
Publicly accessible

Geomechanical Modeling for Thermal Spallation Drilling

Wells for Engineered Geothermal Systems (EGS) typically occur in conditions presenting significant challenges for conventional rotary and percussive drilling technologies: granitic rocks that reduce drilling speeds and cause substantial equipment wear. Thermal spallation drilling,...
Walsh, S. et al Lawrence Livermore National Laboratory
Aug 24, 2011
1 Resources
0 Stars
Publicly accessible

SMP Preparation, Programming, and Characterization

The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of the inherent challenges in geothermal environments, there are limitations in selecting proper lost circulation mate...
Salehi, S. et al University of Oklahoma
Oct 01, 2021
4 Resources
0 Stars
Curated

Utah FORGE: High-Resolution DAS Microseismic Data from Well 78-32

This regards a high-resolution DAS microseismic dataset produced by Silixa from Utah FORGE Phase 2C seismic monitoring well 78-32 during stimulation testing of well 58-32. It is a very large dataset and as such it is currently not directly available on GDR. However, it is availabl...
Martin, T. and Nash, G. Energy and Geoscience Institute at the University of Utah
Oct 20, 2019
5 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Materials Testing Report

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This materials testing report is based on thermoplastic and elastomeric materia...
Teodoriu, C. et al Welltec
Nov 08, 2022
2 Resources
0 Stars
Publicly accessible

SMP and Fracture Modeling

The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of the inherent challenges in geothermal environments, there are limitations in selecting proper lost circulation mate...
Salehi, S. et al University of Oklahoma
Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

Hotspot Project: The Snake River Geothermal Drilling Project Initial Report

The Snake River volcanic province (SRP) overlies a thermal anomaly that extends deep into the mantle; it represents one of the highest heat flow provinces in North America. The primary goal of this project is to evaluate geothermal potential in three distinct settings: (1) Kimama ...
Shervais, J. et al Utah State University
Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Caldwell Ranch Exploration and Confirmation Project, Northwest Geysers, CA: 2011 Geothermal Technologies Peer Review Project Summary

Caldwell Ranch Exploration and Confirmation Project, Northwest Geysers, CA: 2011 Geothermal Technologies Peer Review Project Summary The Caldwell Ranch Exploration and Confirmation Project was to drill, test, and confirm the present economic viability of the undeveloped geothermal...
Walters, M. Geysers Power Company, LLC
Jan 01, 2011
1 Resources
0 Stars
Publicly accessible

Microhole drilling technology utilizing a golden section search algorithm

A fundamental issue in microhole drilling is that delivering high weight-on-bit (WOB), high torque rotational horsepower to a conventional drill bit does not scale down to the hole sizes necessary to realize the envisioned cost savings An optimization algorithm called a golden sec...
Su, J. et al Sandia National Laboratories
Jun 23, 2021
7 Resources
0 Stars
Publicly accessible

First Results Project Hotspot Drilling

Project Hotspot drilled 3 slim hole exploratory wells in southern Idaho, each just under 2 km deep. These holes were designed to investigate thermal structure in three different settings within the Snake River Volcanic Province: (1) along the axial volcanic high of the central SRP...
Shervais, J. et al Utah State University
Mar 15, 2013
1 Resources
0 Stars
Publicly accessible

Grain-Scale Failure in Thermal Spallation Drilling

Geothermal power promises clean, renewable, reliable and potentially widely-available energy, but is limited by high initial capital costs. New drilling technologies are required to make geothermal power financially competitive with other energy sources. One potential solution is ...
Walsh, S. et al Lawrence Livermore National Laboratory
Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Advanced Geothermal Drilling and Logging Technologies

The objective of advanced drilling and logging technologies is to promote ways and means to reduce the cost of geothermal drilling through an integrated effort which involves developing an understanding of geothermal drilling and logging needs, elucidating best practices, and fost...
Raymond, D. et al Sandia National Laboratories
Dec 15, 2013
1 Resources
0 Stars
Publicly accessible

Technology Development and Field Trials of EGS Drilling Systems at Chocolate Mountain

Polycrystalline diamond compact (PDC) bits are routinely used in the oil and gas industry for drilling medium to hard rock but have not been adopted for geothermal drilling, largely due to past reliability issues and higher purchase costs. The Sandia Geothermal Research Departmen...
Knudsen, S. et al Sandia National Laboratories
Jan 01, 2012
3 Resources
0 Stars
Publicly accessible
12345Next >>