Search GDR Data

Seismic Analysis of Spatio-Temporal Fracture Generation During EGS Resource Development Deviatoric MT, Fracture Network, and Final Report

This submission contains 167 deviatoric moment tensor (MT) solutions for the seismicity observed two years prior and three years post start of injection activities at The Geysers Prati 32 EGS Demonstration. Also included is a statistical representation of the properties of 751 fra...

Gritto, R. et al Array Information Technology

Sep 01, 2018
3 Resources
0 Stars
Publicly accessible

Preliminary performance of HT Datalink

Preliminary performance of high-temperature (HT) high-speed (HS) data link at room temperature over 5000 ft of wireline. The data shows ability of the data link to adapt by decreasing speed.

Cieslewski, G. Sandia National Laboratories

Feb 11, 2014
1 Resources
0 Stars
Publicly accessible

Project Data for Evaluation Of Physics-Based Drilling and Alternative Bit Design At The Geysers

This dataset contains project data generated by the project "Evaluation Of Physics-Based Drilling and Alternative Bit Design At The Geysers." It includes drilling, downhole drilling dynamics, bit records, daily drilling reports, directional surveys, lithology and mineralogy data, ...

Wriedt, J. and So, P. Geysers Power Company, LLC

Mar 31, 2026
20 Resources
0 Stars
In curation

Cape EGS: Gold 2-IB Mass Spectrometry and Mudlogs

This dataset contains logs and summaries from the Gold 2-IB well at the Cape EGS site near Utah FORGE, collected during operations in fall 2024. The dataset includes a mass spectrometry log, mudlog, measurement while drilling (MWD) data, and daily geology summaries. The mass spect...

Dadi, S. and Adams, T. Fervo Energy

Apr 30, 2025
4 Resources
0 Stars
Curated

Washington Geothermal Play Fairway Analysis Technical Report

An investment of $0.7M from the Geothermal Technology Office for Phase 2 of Play Fairway Analysis in Washington State improved existing favorability models and increased model confidence. New 1:24,000-scale geological mapping, 15 detailed geophysical surveys, 2 passive seismic sur...

Steely, A. et al Washington Geological Survey

Dec 20, 2017
1 Resources
1 Stars
Publicly accessible

Chemical Fracture Detection During Triaxial Deformation Tests

A set of triaxial tests with sandstone, limestone, and granite samples was conducted to measure fluid chemistry before, during, and after rock fracture. The dataset here includes: 1) five triaxial test data files (xlxs), 2) one file containing the measured test tube volumes for th...

Kibikas, W. Sandia National Laboratories

Aug 19, 2025
3 Resources
0 Stars
Curated

Test Report for Detonation Velocity Measurements

Test report for detonation velocity measurements. A series of tests were conducted to determine reaction rate and general behavior of aluminum (AL) and magnesium (MG) powder mixtures (metalized explosives) with Bullseye double-base smokeless propellant. Given the indeterminate sen...

Grubelich, M. Sandia National Laboratories

Jan 13, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Fluid Injection-Rate Controls on Seismic Moment from Laboratory Fault Reactivation Experiments

This dataset contains experimental and acoustic data from shear reactivation tests that investigate the relationship between fluid-injection rate, pore pressure distribution, and seismic moment during laboratory fault slip. It includes raw mechanical data and acoustic emission rec...

Elsworth, D. et al Pennsylvania State University

Sep 16, 2025
31 Resources
0 Stars
Curated

Nevada Great Basin Play Fairway Analysis Reports & Appendices

This project focused on defining geothermal play fairways and development of a detailed geothermal potential map of a large transect across the Great Basin region (96,000 km2), with the primary objective of facilitating discovery of commercial-grade, blind geothermal fields (i.e. ...

Faulds, J. et al Nevada Bureau of Mines and Geology

Oct 28, 2015
3 Resources
0 Stars
Publicly accessible

Fiber Optic Thermal Slug Experiments Conducted at Texas Tech University Report

The report details a thermal circulation test at Red Raider #2 at the Oil Field Technology Center (OTC) involving staged hot water injections and distributed temperature sensing (DTS) fiber optic measurements. It includes experimental setup, fluid flow and temperature data, therm...

Leggett, S. Texas Tech University

Apr 11, 2025
1 Resources
0 Stars
Curated

Hybrid machine learning model to predict 3D in-situ permeability evolution

Enhanced geothermal systems (EGS) can provide a sustainable and renewable solution to the new energy transition. Its potential relies on the ability to create a reservoir and to accurately evaluate its evolving hydraulic properties to predict fluid flow and estimate ultimate therm...

Elsworth, D. and Marone, C. Pennsylvania State University

Nov 22, 2022
4 Resources
0 Stars
Publicly accessible

DCIF Westerly Granite AE Stress Effect Test (Task 3-1)

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on rectangular Westerly granite blocks (width=depth=4.0", height=2.0"). Liquid nitrogen was poured in a small, 1"-diameter copper cup attached to the top of the sample, and the resulting acoustic emissions (A...

Nakagawa, S. and Trzeciak, M. Lawrence Berkeley National Laboratory

Jul 08, 2021
15 Resources
0 Stars
Publicly accessible

Ground Source Heat Pump Parameter Survey

The purpose of this report is to investigate the effects of various parameters in a horizontal loop geothermal heat pump system. The obtained values include the temperature distribution over the entire system as well as the exiting temperature and bulk heat rate of the fluid. The ...

Gray, E. Wright State University

Jul 31, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 56-32 Drilling Data and Logs

This dataset consists of drilling data (Pason data spreadsheets, daily reports, days v. depth, mud logs), Schlumberger logs (FMI, shear anisotropy analysis, memory, sonic, array induction/spectral density/dual spaced neutron/gamma ray/caliper, spectral GR/temperature, and Gardner ...

Bristol, J. et al Energy and Geoscience Institute at the University of Utah

Mar 19, 2021
18 Resources
0 Stars
Publicly accessible

Utah FORGE: Groundwater Data

This submission includes two modeled drawdown scenarios with new supply well locations, a total dissolved solids (TDS) concentration grid (raster dataset representing the spatial distribution of TDS), and an excel spreadsheet containing well data.

Moore, J. Energy and Geoscience Institute at the University of Utah

Jul 20, 2016
5 Resources
0 Stars
Publicly accessible

U.S. Geothermal District Heating and Cooling Systems Data

This dataset contains detailed information on geothermal district heating and cooling systems across the United States, including geothermal direct use-based district heating systems and geothermal heat pump (GHP)-based district heating and cooling systems. The direct use-based ...

Kolker, A. et al National Renewable Energy Laboratory

Nov 02, 2020
2 Resources
0 Stars
Curated

Hard Rock Drilling Optimization Software

The main objective of the developed software is to reduce the cost per foot during drilling, in other words, optimize the drilling operational parameters in achieving optimum ROP while avoiding critical operational parameters due to either low ROP, drillstring vibration, accelerat...

Al Dushaishi, M. and Hareland, G. Oklahoma State University

Oct 07, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2418: Final Report on Wellbore Fracture Imaging Using Inflow Detection Measurements

This report contains the results of research conducted to make measurements in the FORGE wells to map flowing fractures and estimate their flow magnitudes in real time. Implementation of the project had two substantial goals: (1) to locate flowing fractures at FORGE and estimate t...

Horne, R. Stanford University

Aug 22, 2025
1 Resources
0 Stars
Curated

Dynamic Column Extraction for Europium on Media 1 at Ambient Temperature

This is a dataset for a 200ppm europium solution sent through a column with 12g of media #1 at pH of 3.2. This column experiment was run at ambient temperature at a flow rate of 2mL/min.

Garland, G. Tusaar Corp.

Apr 07, 2015
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Injection and Production Test results and Reports from August 2024

This dataset includes results and reports from the injection/production test for wells 16A(78)-32 and 16B(78)-32 in August, 2024 at Utah FORGE. Materials include injection, post stimulation production, flow rate, gamma, temperature and pressure survey results. For the respective ...

Kolomytsev, L. and Chadwick, C. Energy and Geoscience Institute at the University of Utah

Sep 24, 2024
2 Resources
0 Stars
Publicly accessible

StimuFrac Compressibility as a Function of CO2 Molar Fraction

Compressibility values were obtained in a range of pressures at 250degC by employing a fixed volume view cell completely filled with PAA aqueous solution and injecting CO2 at constant flow rate (0.3mL/min). Pressure increase as a function of supercritical CO2 (scCO2) mass fraction...

A., C. Pacific Northwest National Laboratory

Apr 29, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 InSAR Study Results

Ground movement is evaluated through analysis of Interferometric Synthetic Aperture Radar (InSAR) interferograms. Results indicate there has been no detectable ground movement at millimeter scale. The zipped file in this submission contains a report, maps, and results from the InS...

Feigl, K. and Batzli, S. Department of Geoscience University of Wisconsin-Madison

Sep 24, 2020
1 Resources
0 Stars
Publicly accessible

Northwestern Michigan College Formation Thermal Conductivity Test Report

This report summarizes a formation thermal conductivity test performed July 29-31, 2025 on a579-ft vertical bore at Northwestern Michigan College in Traverse City, Michigan. It describes the test setup, operating conditions, data acquisition procedures, calibration details, and bo...

Streich, G. Northwestern Michigan College

Jul 31, 2025
1 Resources
0 Stars
Curated

3D Model of the Tuscarora Geothermal Area

The Tuscarora geothermal system sits within a ~15 km wide left-step in a major west-dipping range-bounding normal fault system. The step over is defined by the Independence Mountains fault zone and the Bull Runs Mountains fault zone which overlap along strike. Strain is transferre...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

SGW paper Rheological Properties of Drilling Fluids Containing Special Additives for Geothermal Drilling Applications

The paper was presented at the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 15-17, 2021. In this study, the effectiveness of different additives was evaluated in maintaining drilling fluid rheology at HPHT(high pressure and...

Mohamed, A. et al University of Oklahoma

Jan 04, 2023
1 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 Next >>