Search GDR Data

Utah FORGE: Well 16B(78)-32 Canamera Core Drilling Report

This is a summary report by Canamera Coring discussing the core drilling of Utah FORGE Well 16B(78)-32. This report includes detailed drilling graphics, images, and metrics from each coring run completed. About 240' of 4" core was taken from 4855' to 10493' in depth.

Mock, B. Canamera Coring

May 17, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 2024 Stimulations Microseismic Event Catalog from Seismic Surface Network

This archive provides a a link to a microseismic event catalog of the 2024 stimulations at Utah FORGE. The catalog was derived from data collected with the surface monitoring network consisting of 5 permanent seismic stations deployed by the University of Utah Seismograph Station...

Niemz, P. et al University of Utah Seismograph Stations

Jul 29, 2024
2 Resources
0 Stars
Publicly accessible

Utah FORGE: GPS Data Deformation Monitoring

This data bundle contains raw GPS data files and resulting data using Trimble Business Center and NOAA OPUS to process the GPS data in spreadsheets with station coordinates and elevations. A map of station locations is included along with the final processing report which includes...

Erickson, B. and McKean, A. Energy and Geoscience Institute at the University of Utah

Jun 24, 2019
2 Resources
0 Stars
Publicly accessible

Cape EGS: Frisco Pad Flow Test Microseismic Monitoring Catalog

This dataset contains a microseismic event catalog acquired during the Frisco pad flow test project led by Fervo Energy, conducted between July 17th Sept 5th 2024, near the Utah FORGE geothermal site. The microseismic events are located using data collected from various Utah FORGE...

Dadi, S. et al Fervo Energy

Aug 06, 2025
1 Resources
0 Stars
Curated

Utah FORGE: Well 16A(78)-32 X-ray Diffraction Data

This submission contains x-ray diffraction data taken from 3,600 to 10,987 feet deep in well 16A(78)-32 in the Roosevelt Hot Springs Geothermal Area as part of the Utah FORGE project. 78 rock samples were taken. Samples are taken in a range of ten feet at 100 foot increments. Mine...

Jones, C. Energy and Geoscience Institute at the University of Utah

Jul 29, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 (MU-ESW1) FMI Log Fracture Results

A Schlumberger Fullbore Formation Micro-Imager (FMI) log was run from 7390 feet to 7527 feet depth in well 58-32, originally known as well MU-ESW1. Well 58-32 was completed in 2017 as part of Utah FORGE Phase 2. It reached a depth of 7536 feet and recorded a bottom hole temperatur...

BLOCHOWICZ, A. Energy and Geoscience Institute at the University of Utah

Mar 06, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2615: Thermo-poromechanical Response of Fractured Rock 2023 Annual Workshop Presentation

This is a presentation on the Experimental Determination and Modeling-Informed Analysis of Thermo-poromechanical Response of Fractured Rock for Application to Utah FORGE project by the University of Oklahoma, presented by Dr. Ahmad Ghassemi, McCasland Chair Prof. The project objec...

Ghassem, A. University of Oklahoma

Sep 08, 2023
1 Resources
0 Stars
Curated

Utah FORGE: EGS Reservoir Produced Fluids Geochemistry 2022-2024

This dataset contains geochemical analyses of produced fluids from the Utah FORGE site, specifically from wells 16A(78)-32, 16B(78)-32, and 58-32, collected during various stimulation, flowback, and circulation tests conducted between 2022 and 2024. The data contains element conce...

Simmons, S. et al Energy and Geoscience Institute at the University of Utah

Feb 26, 2025
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Preliminary Report on Development of a Reservoir Seismic Velocity Model

This report describes the development of a preliminary 3D seismic velocity model at the Utah FORGE site and first results from estimating seismic resolution in the generated fracture volume during Stage 3 of the April 2022 stimulation. A preliminary 3D velocity model for the larg...

Gritto, R. Array Information Technology

Jan 30, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Magnetotelluric (MT) Data

New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...

Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah

Oct 01, 2020
5 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Report on Geodetic Observations of Fracture Development During April 2024 Stimulations

This report presents geodetic observations from the April 2024 stimulations at the Utah FORGE site, as part of LBNL FORGE Project 3-2535. It focuses on Distributed Strain Sensing (DSS) data from an optical fiber in well 16B, capturing localized strain linked to fracture propagatio...

Vasco, D. et al Lawrence Berkeley National Laboratory

Apr 28, 2025
1 Resources
0 Stars
Curated

Utah FORGE: Temperature Contours

This submission contains several ArcGIS shapefiles, each with Temperature contour lines at different depths. Subsurface temperature were important for characterizing the geothermal system beneath the FORGE site in Milford, Utah.

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 09, 2016
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Record of Frac Hits on Well 16B(78)-32 During Stimulation of Well 16A(78)-32 April 2024

This dataset documents frac hit observations recorded in well 16B(78)-32 during hydraulic stimulation of well 16A(78)-32 in April 2024 at the Utah FORGE site. The spreadsheet provides a chronological record of identified frac hits, including an event label, measured depth in feet ...

Khatara, S. et al Energy and Geoscience Institute at the University of Utah

Feb 20, 2026
1 Resources
0 Stars
Curated

Utah FORGE: Phase Native State FALCON Model Files

The submission includes FALCON input file and mesh for the an initial pressure-temperature simulation, and a second set for pressure-temperature-displacement simulation. All simulations are steady state. Data and input for the FORGE Phase 2 native state model were compiled from hi...

Podgorney, R. Idaho National Laboratory

Jun 06, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone

Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...

Um, E. et al Lawrence Berkeley National Laboratory

Feb 06, 2023
4 Resources
0 Stars
Publicly accessible

Utah FORGE 6-3712: Report on Building a Recurrent Neural Network Framework for Induced Seismicity October, 2025

This is a technical report for the Probabilistic Estimation of Seismic Response Using Physics Informed Recurrent Neural Networks project. The report describes the process of designing a recurrent neural network (RNN) to predict induced seismicity. Background material is included t...

Williams, J. et al Global Technology Connection, Inc.

Oct 13, 2025
1 Resources
0 Stars
Curated

Utah FORGE 3-2514: A Strain Sensing Array to Characterize Deformation at the FORGE Site 2023 Annual Workshop Presentation

This is a presentation on the Strain Sensing Array to Characterize Deformation at the FORGE Site project by Clemson University, presented by Lawrence Murdoch. The project's objective was to evaluate the feasibility of measuring and interpreting tensor strain data to improve the pe...

Murdoch, L. et al Clemson University

Sep 08, 2023
1 Resources
0 Stars
Curated

Utah FORGE 2439: A Multi-Component Approach to Characterizing In-Situ Stress

Core-based in-situ stress estimation, Triaxial Ultrasonic Velocity (labTUV) data, and Deformation Rate Analysis (DRA) data for Utah FORGE well 16A(78)-32 using triaxial ultrasonic velocity and deformation rate analysis. Report documenting a multi-component approach to characterizi...

Bunger, A. et al Battelle Memorial Institute

Dec 13, 2022
4 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: DAS-derived Moment Tensors from the 16A/16B Stimulation April, 2024

This dataset contains a catalog of moment tensors derived from distributed acoustic sensing (DAS) data acquired during stimulation of Utah FORGE Well 16A, conducted between April 3 and April 7, 2024. The data were generated as part of the FOGMORE (Fiber Optic MOnitoring for Reserv...

Vera Rodriguez, I. et al Rice University

Aug 22, 2025
11 Resources
0 Stars
Curated

Utah FORGE: 2020-2021 Geothermal Energy/EGS Survey and Results

The Utah FORGE project collaborated with the University of Utahs Department of Communication on a Capstone course during Fall Semester 2020. The course created a survey to gauge the general populations knowledge of geothermal energy and Enhanced Geothermal Systems (EGS). The surve...

Yeo, S. and McKasy, M. Energy and Geoscience Institute at the University of Utah

Jul 20, 2021
1 Resources
0 Stars
Curated

Utah FORGE 3-2417: Simulation Meshes and Results from Extended Circulation and Pulse Interference Testing

This dataset contains numerical simulation meshes and modeling results from extended circulation and pulse interference tests conducted between Utah FORGE wells 16A(78)-32 and 16B(78)-32. The simulations were performed as part of the FOGMORE Utah FORGE project (Fiber Optic MOnitor...

Lee, S. and Ghassemi, A. Rice University

Sep 05, 2025
4 Resources
0 Stars
Curated

Utah FORGE 3-2535: Compilation of Geodetic Data and Estimation of Associated Deformation

Report on possible geodetic signature of the 3 stimulations in April 2022 as well as a comparison with existing InSAR data gathered over the site before, during, and after the stimulation. In geothermal production it is important to understand the existing stress field and the cha...

Vasco, D. et al Lawrence Berkeley National Laboratory

Apr 29, 2022
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Neubrex Well 16B(78)-32 Stimulation Fiber Optic Monitoring Reports April and May, 2024

These reports contain information on the distributed temperature sensing (DTS), distributed strain sensing (DSS), and pressure monitoring during the stimulation of Well 16(B)78-32 at Utah FORGE, in April and May 2024. Reports include information on data collection and calibrations...

Jurick, D. and Guzik, D. Neubrex Energy Services (US), LLC

Apr 30, 2024
3 Resources
0 Stars
Publicly accessible

Utah FORGE: QuantumPro Well 16A(78)-32 and 16B(78)-32 Stimulation and Circulation Tracer Test Results 2024

This dataset includes results and supporting documentation from tracer tests conducted in 2024 at Utah FORGE. The tests involved injecting nanoparticle tracers into injection well 16A(78)-32 and monitoring their recovery in production well 16B(78)-32 to assess hydraulic connectivi...

Guo, Q. et al QuantumPro Inc.

Jan 07, 1970
1 Resources
0 Stars
Publicly accessible

Utah FORGE: GeoEnergie Suisse Microseismic Monitoring of 16A and 16B Circulation at Utah FORGE, August-September 2024

This dataset contains microseismic event data collected by Geo-Energie Suisse during circulation testing of wells 16A(78)-32 and 16B(78)-32 at the Utah FORGE site in August and September 2024. The data were recorded using a local monitoring network and include key event parameters...

Dyer, B. et al Geo-Energy Suisse

Jun 20, 2025
2 Resources
0 Stars
Curated

<< Previous 4 5 6 7 8 9 10 11 12 13 Next >>