Search GDR Data

Showing results 26 - 50 of 64.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Technologies
Featured Projects
Topics
Data Type
"flow through"×
Utah FORGE×

Utah FORGE 10-3726: Geothermal Multiset Straddle for High Temperature Applications 2024 Annual Workshop Presentation

This is a presentation on the Geothermal Multiset Straddle (GMS) for High Temperature Applications by Welltec, presented by Ricardo Vasques. This video slide presentation discusses the development of (1) an annular multiset isolation system; (2) a stimulation straddle isolation sy...
Esquitin, Y. and Vasques, R. Energy and Geoscience Institute at the University of Utah
Sep 17, 2024
1 Resources
0 Stars
Curated

Utah FORGE: Fault Shear Reactivation Experimental Data for Fluid Injection-Rate Controls on Seismic Moment

Included are experimental data recorded from shear experiments that specifically explore the link between fluid-injection rate and seismic moment resulting from shear reactivation of laboratory faults. Raw mechanical data from three experiments are included alongside corresponding...
Roseboom, M. et al Pennsylvania State University
Nov 07, 2023
6 Resources
0 Stars
Curated

Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection Measurements Workshop Presentation

This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection Measurements project by Stanford University, presented by Dr. Roland N. Horne. The project's objective was to make measurements in the Utah FORGE wells, both before and after fracturing experiments, to...
Horne, R. and Su, J. Stanford University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 1-2410: Development of a Smart Completion and Stimulation Solution Workshop Presentation

This is a presentation on the Development of a Smart Completion & Stimulation Solution project by Welltec in collaboration with the University of Oklahoma, presented by Yosafat Esquitin, a Senior Business Development Manager at Welltec. The project's objective was to develop an an...
Esquitin, Y. et al Welltec
Sep 08, 2023
1 Resources
0 Stars
Curated

Utah FORGE 5-2615: Laboratory Data for Insights on Hydraulic Fracture Closure and Stress Measurement

This dataset includes data from injection/fall-off experiments conducted in controlled laboratory settings. The aim is to investigate the physics governing fracture closure and the associated stress measurements during hydraulic fracturing. These time series data include flow rat...
Ye, Z. and Ghassemi, A. The University of Oklahoma
Jun 12, 2024
5 Resources
0 Stars
Curated

Utah FORGE 4-2492: Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery 2024 Annual Workshop Presentation

This is a presentation on the Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency by The University of Texas at Austin, presented by Mukul M. Sharma. This video slide presentation discusses the following objectives: (1) to place fr...
Sharma, M. Energy and Geoscience Institute at the University of Utah
Sep 16, 2024
1 Resources
0 Stars
Curated

Utah FORGE: Phase 3 InSAR Study Results

Ground movement is evaluated through analysis of Interferometric Synthetic Aperture Radar (InSAR) interferograms. Results indicate there has been no detectable ground movement at millimeter scale. The zipped file in this submission contains a report, maps, and results from the InS...
Feigl, K. and Batzli, S. Department of Geoscience University of Wisconsin-Madison
Sep 24, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2419: Seismicity-Permeability Relationships Probed via Nonlinear Acoustic Imaging Workshop Presentation

This is a presentation on the Seismicity-Permeability Relationships Probed via Nonlinear Acoustic Imaging project by Pennsylvania State University, presented by Derek Elsworth. The project's objectives were to explore controls and acoustic signatures of aseismic through seismic e...
Elsworth, D. et al Pennsylvania State University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 2020-2021 Geothermal Energy/EGS Survey and Results

The Utah FORGE project collaborated with the University of Utahs Department of Communication on a Capstone course during Fall Semester 2020. The course created a survey to gauge the general populations knowledge of geothermal energy and Enhanced Geothermal Systems (EGS). The surve...
Yeo, S. and McKasy, M. Energy and Geoscience Institute at the University of Utah
Jul 20, 2021
1 Resources
0 Stars
Curated

Utah FORGE 5-2419: Seismicity-Permeability Relationships Probed via Nonlinear Acoustic Imaging 2024 Annual Workshop Presentation

This is a presentation on Seismicity-Permeability Relationships Probed via Nonlinear Acoustic Imaging by Pennsylvania State University, presented by Derek Elsworth. This video slide presentation discussed controls and acoustic signatures of aseismic through seismic evolution of re...
Elsworth, D. et al Energy and Geoscience Institute at the University of Utah
Sep 05, 2024
1 Resources
0 Stars
Curated

Utah FORGE: Well 78B-32 Daily Drilling Reports and Logs

This data set includes the daily drilling reports and Pason data for well 78B-32 and Schlumberger logs acquired after drilling completion. This well was drilled between June 27th and July 31st of 2021. Also included is raw and processed data for a variety of well data metrics incl...
McLennan, J. Energy and Geoscience Institute at the University of Utah
Aug 09, 2021
22 Resources
0 Stars
Curated

Utah FORGE: Well 16A(78)-32 Drilling Data

This dataset includes survey data, drilling data, daily reports, summaries of daily operations, and rig photos from the drilling of Utah FORGE well 16A(78)-32, which is a highly deviated deep well. It was completed 60 days ahead of schedule. Rig move in began 10/22/2020 and dril...
McLennan, J. et al Energy and Geoscience Institute at the University of Utah
Jan 08, 2021
15 Resources
0 Stars
Curated

Utah FORGE: Earthquake Catalog

This is the set of earthquake catalogs developed for the Utah FORGE project covering December of 2016 through March of 2018. These are discussed in the "Utah FORGE Phase 2B Final Topical Report," which can be found on GDR under id: 1038 (See link 'Final Topical Report' in resource...
Pankow, K. Energy and Geoscience Institute at the University of Utah
Mar 21, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Pump and Probe Test on a Mated Fracture Westerly Granite Sample

This dataset contains results from a pump and probe experiment conducted on a mated fracture Westerly Granite sample with a diameter of 1 inch and a height of 2 7/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-line...
Klinghammer, H. et al Pennsylvania State University
May 19, 2024
4 Resources
0 Stars
Curated

EGS Collab: Modeling and Simulation Working Group Teleconference Series (129-130)

This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 129 through 130. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field act...
White, M. et al Pacific Northwest National Laboratory
Jun 22, 2022
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Stimulation Data

Pressure, temperature, and flow data from open-hole, upper perforation, and lower perforation well stimulations gathered from various tools collected at well 58-32 during phase 2C.
Best, S. Geothermal Resource Group
Apr 20, 2019
16 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Logs

This dataset contains all well logs from Utah FORGE well 16A(78)-32. This includes the mud log, Sanvean Technologies logs, and Schlumberger logs. Please see the file descriptions below for information about each log.
Gilmour, B. et al Energy and Geoscience Institute at the University of Utah
Mar 08, 2021
7 Resources
0 Stars
Publicly accessible

Cape EGS: Frisco Pad Wells Flow Test Microseismic Data

This dataset contains microseismic data acquired during the Frisco pad flow test project led by Fervo Energy, conducted between July 17th Aug 12th 2024, near the Utah FORGE geothermal site. The microseismic data was collected from various Utah FORGE wells: via Distributed Acoustic...
Dadi, S. and Kanu, O. Fervo Energy
Nov 06, 2024
5 Resources
0 Stars
Curated

Utah FORGE 2439: Well 16B(78)-32 Field-Test Data from Mini-Frac Tests

This submittal includes the field-test data collected during stress tests conducted in the Utah FORGE 16B(78)-32 wellbore to measure/characterize the stresses in the geothermal reservoir. The type of stress test performed is referred to as a mini-frac test or a micro-frac test. Th...
Kelley, M. et al Battelle Memorial Institute
Jul 02, 2023
3 Resources
0 Stars
Curated

Utah FORGE: Optimization of a Plug-and-Perf Stimulation (Fervo Energy)

Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy. Objective and Purpose: Develop a multistage hydraulic stimulation approach designed specifically to target the top three factors that control the technical and commercial viability of an EGS sys...
Norbeck, J. et al Fervo Energy
Feb 08, 2023
3 Resources
0 Stars
Publicly accessible

Utah FORGE: InSAR Data from 2021

Interferometric Synthetic Aperture Radar data from the TerraSAR-X and the TanDEM-X satellite missions operated by the German Space Agency (DLR). Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software (see link in Resources). Data...
Batzli, S. and Feigl, K. University of Wisconsin
Nov 30, 2021
9 Resources
0 Stars
Curated

Utah FORGE: InSAR Data from 2020

Interferometric Synthetic Aperture Radar data from the TerraSAR-X and the TanDEM-X satellite missions operated by the German Space Agency (DLR). Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software (see link in Resources). Data...
Batzli, S. and Feigl, K. University of Wisconsin
Dec 24, 2020
9 Resources
0 Stars
Curated

Utah FORGE: InSAR Data from 2022

Interferometric Synthetic Aperture Radar data from the TerraSAR-X and the TanDEM-X satellite missions operated by the German Space Agency (DLR). Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software (see link in Resources). Data...
Batzli, S. and Feigl, K. University of Wisconsin
Nov 30, 2022
9 Resources
0 Stars
Curated

Utah FORGE: Well 78-32 Capacity Test

This dataset includes an Excel spreadsheet with Utah FORGE Phase 2c Well 78-32 capacity data. It also includes a readme file discussing the data which also includes the well coordinates.
Kirby, S. and Gall, R. Energy and Geoscience Institute at the University of Utah
Jun 20, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2615: Shear Enhanced Permeability In a Granitoid Fracture Presentation Slides

Provided here is a set of presentation slides detailing stress-dependent permeability in FORGE granitoid fractures and how fracture slip affects permeability. It outlines empirical correlations between permeability, stress, and fracture aperture, emphasizing that mechanically clos...
Ghassemi, A. and Ye, Z. University of Oklahoma
Feb 28, 2024
1 Resources
0 Stars
Curated
<< Previous123Next >>