Search GDR Data

Showing results 26 - 50 of 431.
Show results per page.
Order by:
Available Now:
Technologies
Featured Projects
Topics
Data Type
"high pressure"×

SGW paper Rheological Properties of Drilling Fluids Containing Special Additives for Geothermal Drilling Applications

The paper was presented at the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 15-17, 2021. In this study, the effectiveness of different additives was evaluated in maintaining drilling fluid rheology at HPHT(high pressure and...
Mohamed, A. et al University of Oklahoma
Jan 04, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Core Material Friction Experiments

The following folders contain 3 friction experiments on Utah FORGE core material from depths of 6735 8533ft. The experiment conditions range from 100% relative humidity at room temperature to fluid-saturated at 110C. Experiments were done on both intact samples in a single-direct ...
Marone, C. et al Pennsylvania State University
Mar 15, 2023
7 Resources
0 Stars
Publicly accessible

Utah FORGE 10-3627: Thermo Re-Settable Straddle System 2025 Workshop Presentation

This is a presentation on Thermo Re-Settable Straddle System by PetroQuip Energy Services, presented by Robert Coon. This video slide presentation describes the development of a resettable straddle tool with multiple packers and injection ports designed to test multiple open-hole ...
Coon, R. PetroQuip Energy Services
Sep 18, 2025
3 Resources
0 Stars
Curated

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All expe...
Yu, J. et al Pennsylvania State University
Jul 01, 2023
27 Resources
0 Stars
Publicly accessible

Utah FORGE: Chemical-Based Tool Deployment Data for Inflow Detection at Wells 58-32 and 16B(78)-32 Summer 2024 Circulation Test

This dataset comprises field logging data collected during chemical-based tool deployments at the Utah FORGE geothermal site, specifically at monitoring well 58-32 and production well 16B(78)-32. Data acquisition occurred during the Summer 2024 circulation testing campaign, with t...
Sausan, S. et al Stanford University
Mar 31, 2025
12 Resources
0 Stars
Curated

Supercritical Geothermal Wells: Drilling and Completion Materials Database

This dataset compiles information on geothermal wells drilled into supercritical and near-supercritical conditions, with a focus on drilling and completion materials, fluid chemistry, and laboratory validation studies. The data are drawn from well reports, scientific literature, a...
Kibikas, W. et al Sandia National Laboratories
Sep 18, 2025
13 Resources
0 Stars
In curation

Utah FORGE 9-3635: Testing of Proppants for EGS and Simulation of EM Fracture Mapping Using Electrically-Conductive Proppants 2025 Workshop Presentation

This is a presentation on High-Temperature Testing of Proppants for EGS and Simulation of Electromagnetic Fracture Mapping Using Electrically-Conductive Proppants by Stevens Institute of Technology, presented by Dr. Cheng Chen. This video slide presentation describes laboratory te...
Chen, C. Stevens Institute of Technology
Sep 18, 2025
3 Resources
0 Stars
Curated

Community Geothermal: Geothermal Heat Exchange Test Well Temperature, Conductivity, and Water Level Data Seward, AK

This dataset contains temperature, conductivity, and pressure data collected from a geothermal test well in Seward, Alaska, from October 31, 2023, through May 14, 2024. The data from the sensors are used to assess the potential for geothermal heat exchange along the shoreline of t...
Mitchell, M. et al National Renewable Energy Laboratory
Sep 29, 2024
11 Resources
0 Stars
In curation

Oilwell Conversion (Well API 121913310501) to Geothermal Heat Storage Well for Flexible Electricity Storage

Geothermal growth is limited by a lack of geographically dispersed high-temperature thermal resources and high initial upfront investment in characterization and well construction. This project intended to address the challenges of energy supply intermittency and enhance grid resi...
Malkewicz, N. et al University of Illinois
May 05, 2021
8 Resources
1 Stars
Publicly accessible

Utah FORGE 5-2615: Laboratory Data for Insights on Hydraulic Fracture Closure and Stress Measurement

This dataset includes data from injection/fall-off experiments conducted in controlled laboratory settings. The aim is to investigate the physics governing fracture closure and the associated stress measurements during hydraulic fracturing. These time series data include flow rat...
Ye, Z. and Ghassemi, A. University of Oklahoma
Jun 12, 2024
6 Resources
0 Stars
Publicly accessible

Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems

This is a final technical report for the project: Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems (EGS). The goal is to demonstrate the feasibility of foam fracturing in EGS applications. The project, led by Oak Ridge National Laboratory (ORNL), wa...
Wang, H. et al Oak Ridge National Laboratory
May 17, 2022
3 Resources
0 Stars
Publicly accessible

Caldwell Ranch Exploration and Confirmation Project, Northwest Geysers, CA: 2011 Geothermal Technologies Peer Review Project Summary

Caldwell Ranch Exploration and Confirmation Project, Northwest Geysers, CA: 2011 Geothermal Technologies Peer Review Project Summary The Caldwell Ranch Exploration and Confirmation Project was to drill, test, and confirm the present economic viability of the undeveloped geothermal...
Walters, M. Geysers Power Company, LLC
Jan 01, 2011
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Well 16B(78)-32 Field-Test Data from Mini-Frac Tests

This submittal includes the field-test data collected during stress tests conducted in the Utah FORGE 16B(78)-32 wellbore to measure/characterize the stresses in the geothermal reservoir. The type of stress test performed is referred to as a mini-frac test or a micro-frac test. Th...
Kelley, M. et al Battelle Memorial Institute
Jul 02, 2023
4 Resources
0 Stars
Publicly accessible

Ionic Fluids for EGS: Thermohydraulic Flow Data for Alternative Geothermal Fluids

This dataset contains thermohydraulic measurements of fluid flow through single and dual fracture systems under controlled laboratory conditions. Experiments were conducted at Oklahoma State University using various ionic and nonionic fluids, including deep eutectic solvents (DES)...
Maitra, E. et al Oklahoma State University
Sep 13, 2025
8 Resources
0 Stars
Curated

Utah FORGE: Seismic and Other Shapefiles from the Roosevelt Hot Springs Area

Three shapefiles in this submission show the position of proposed seismic line surveys. The mid-crustal velocity anomaly file shows the extent of an anomalously low P-wave velocity zone in the subsurface. Two other files show the extent of known hydrothermal systems in the Rooseve...
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 22, 2016
7 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Stimulation Conference Paper and Data

The U.S. Department of Energy's (U.S. DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is a field laboratory that provides a unique opportunity to develop and test new technologies for characterizing, creating and sustaining Enhanced Geothermal Systems (EGS) in ...
Best, S. Energy and Geoscience Institute at the University of Utah
Apr 24, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results February 2025

This dataset contains results from nine triaxial direct shear tests conducted by Los Alamos National Laboratory on samples from FORGE Well 16A(78)-32. The primary objectives of this work were to determine the shear strength in both intact and residual states, evaluate dilation aga...
Frash, L. et al Los Alamos National Laboratory
Feb 28, 2025
1 Resources
0 Stars
Publicly accessible

Raw Pressure Data from Observation Wells at Brady's Hot Springs

This .csv files contain the raw water pressure data from three observation wells during pumping tests performed in the Spring of 2016. Included is a "read me" file explaining the details of where and how the data were collected.
Lim, D. University of Wisconsin
Mar 13, 2016
6 Resources
0 Stars
Publicly accessible

Brady's Geothermal Field Analysis of Pressure Data

*This submission provides corrections to GDR Submissions 844 and 845* Poroelastic Tomography (PoroTomo) by Adjoint Inverse Modeling of Data from Hydrology. The 3 *csv files containing pressure data are the corrected versions of the pressure dataset found in Submission 844. The ...
Lim, D. University of Wisconsin
Mar 17, 2017
6 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2419: Fluid Injection Experiments on Granite Samples at Four Different Temperatures

This dataset contains results from four fluid injection experiments at 24 C, 69 C, 111 C, and 140 C using a triaxial loading apparatus ("Temco"). Tests were conducted on a Utah FORGE granite sample with a 30 degree inclined fracture. Confining pressure was maintained at 10 MPa, wh...
Wang, J. and Elsworth, D. Pennsylvania State University
Sep 05, 2024
4 Resources
0 Stars
Curated

Utah FORGE: Fluid Injection-Rate Controls on Seismic Moment from Laboratory Fault Reactivation Experiments

This dataset contains experimental and acoustic data from shear reactivation tests that investigate the relationship between fluid-injection rate, pore pressure distribution, and seismic moment during laboratory fault slip. It includes raw mechanical data and acoustic emission rec...
Elsworth, D. et al Pennsylvania State University
Sep 16, 2025
31 Resources
0 Stars
Curated

Utah FORGE: Shut-In Wellhead Pressure Monitoring Data for Wells 58-32, 16A(78)-32, and 16B(78)-32

This dataset contains shut-in wellhead pressure monitoring data collected at the Utah FORGE site for wells 58-32, 16A(78)-32, and 16B(78)-32. The data are provided in an Excel spreadsheet and include time-stamped pressure measurements recorded during shut-in periods. Pressure valu...
McLennan, J. Energy and Geoscience Institute at the University of Utah
Dec 03, 2025
1 Resources
0 Stars
Curated

Utah FORGE: Fluid Injection Induced Shearing Experiments on Fractured Granitoid at Elevated Temperatures

This repository contains experimental data from a series of fluid injection-induced shearing tests conducted on Utah FORGE granitoid. The experiments were performed using an aluminum triaxial pressure vessel (TEMCO) apparatus at Pennsylvania State University. The primary aim was t...
Elsworth, D. et al Pennsylvania State University
Aug 12, 2024
16 Resources
0 Stars
Publicly accessible

Lost Circulation Materials in Geothermal Drilling: Thermal Degradation, Viscosity, Compression, and Flow Loop Tests

This dataset provides a set of experimental data on the performance of lost circulation materials (LCMs) used in geothermal drilling operations. It includes results from four distinct tests: thermal degradation, viscosity measurements, compression tests, and high-temperature flow ...
Kibikas, W. et al Sandia National Laboratories
Feb 01, 2022
9 Resources
0 Stars
Curated

Utah FORGE: Wells Updated Temperature and Pressure Logs (June 2021)

This dataset includes updated temperature and pressure logs for Utah FORGE wells 56-32, 78-32, and 58-32. This data was acquired in June 2021.
Stout, F. Di Drill Survey Services
Jun 29, 2021
4 Resources
0 Stars
Publicly accessible
<< Previous123456Next >>