Search GDR Data

Brady Geothermal Field PoroTomo Laboratory Deployment Map

Map of the PoroTomo Laboratory at Brady Field, Nevada. Map includes locations of GPS Stations, Shaker Stations, Vibroseis Sites, Seismometers, Fiber-Optic Cables, and wells

Lopeman, J. University of Wisconsin

Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

Testing for Controlled Rapid Pressurization

Borehole W1 is a NQ core hole drilled at our test site in Socorro. The rock is rhyolite. Borehole W1 which was used to test gas-gas explosive mixtures is 55 feet deep with casing (pinkish in the drawing) set to 35 feet. The model is a representation of the borehole and the hol...

Knudsen, S. Sandia National Laboratories

Sep 03, 2014
1 Resources
0 Stars
Publicly accessible

Chlorite, Biotite, Illite, Muscovite and Feldspar Dissolution Kinetics at Variable pH and Temperatures up to 280 deg C

Chemical reactions pose an important but poorly understood threat to EGS long-term success because of their impact on fracture permeability. This report summarizes the dissolution rate equations for layered silicates where data were lacking for geothermal systems. Here we report ...

Carroll, S. et al Lawrence Livermore National Laboratory

Feb 24, 2017
2 Resources
0 Stars
Publicly accessible

CO2 Push-Pull Dual (Conjugate) Faults Injection Simulations

This submission contains datasets and a final manuscript associated with a project simulating carbon dioxide push-pull into a conjugate fault system modeled after Dixie Valley- sensitivity analysis of significant parameters and uncertainty prediction by data-worth analysis. Datas...

Oldenburg, C. et al Lawrence Berkeley National Laboratory

Jul 20, 2017
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Slide-Hold-Slide Experiments on Westerly Granite at Temperatures up to 250 Degrees C

Laboratory slide-hold-slide tests were conducted in a conventional triaxial deformation configuration on 1-inch diameter cylindrical cores of Westerly granite bisected by a sawcut oriented at 30 degrees from vertical. Tests were conducted at a constant confining pressure of 30 MPa...

Jeppson, T. et al United States Geological Survey

Oct 10, 2023
2 Resources
0 Stars
Curated

Utah FORGE: 2020-2021 Geothermal Energy/EGS Survey and Results

The Utah FORGE project collaborated with the University of Utahs Department of Communication on a Capstone course during Fall Semester 2020. The course created a survey to gauge the general populations knowledge of geothermal energy and Enhanced Geothermal Systems (EGS). The surve...

Yeo, S. and McKasy, M. Energy and Geoscience Institute at the University of Utah

Jul 20, 2021
1 Resources
0 Stars
Curated

Performance, Cost, and Financial Parameters of Geothermal District Heating Systems for Market Penetration Modeling under Various Scenarios

The U.S. Department of Energy Geothermal Vision (GeoVision) Study is currently looking at the potential to increase geothermal deployment in the U.S. and to understand the impact of this increased deployment. This paper reviews 31 performance, cost, and financial parameters as inp...

Beckers, K. and Young, K. National Renewable Energy Laboratory

Mar 23, 2017
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 78B-32 Core Photos Wet and Dry in Boxes

This is a set of 42 core photos, in boxes, from Utah FORGE well 78B-32. The photos show the core both wet and dry from depths of 6700 6737 feet and 8502 8538 feet.

Jones, C. Energy and Geoscience Institute at the University of Utah

Oct 21, 2021
1 Resources
0 Stars
Curated

EGS Collab Experiment 2: Core Logs

Core logs and photos from the EGS Collab project Experiment 2 for the Top Vertical well (TV4100) and the Top Horizontal well (TV 4100) on the 4100 Level of SURF (the Sanford Underground Research Facility). The core logs are stored in a single PDF file with 5-ft run intervals. In t...

Dobson, P. et al Lawrence Berkeley National Laboratory

Jul 08, 2019
7 Resources
0 Stars
Publicly accessible

Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration...

Iovenitti, J. AltaRock Energy Inc

May 15, 2013
15 Resources
0 Stars
Publicly accessible

Utah FORGE: GIS Well Temperature Data

This is a GIS point feature shapefile representing wells, and their temperatures, that are located in the general Utah FORGE area near Milford, Utah. There are also fields that represent interpolated temperature values at depths of 200 m, 1000 m, 2000 m, 3000 m, and 4000 m. in deg...

Gwynn, M. et al Energy and Geoscience Institute at the University of Utah

Feb 28, 2018
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Earth Model Datasets

The EGS Collab Project performed a series of tests to increase the understanding the response of crystalline rock mass to stimulations and fluid circulation to efficiently implement enhanced geothermal systems (EGS) technologies. The EGS Collab team created two underground testbed...

Neupane, G. et al Idaho National Laboratory

May 29, 2022
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Earth Model Native State Simulation Results

Utah FORGE phase 2C Native State Simulation zip contains the data used for the boundary conditions and subsequent native state simulation results obtained using the simulation code FALCON. Data are from the nodes of the simulation domain, with used a uniform 50m spacing over a 250...

Podgorney, R. Energy and Geoscience Institute at the University of Utah

Jul 16, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Development of Multi-Stage Fracturing System and Wellbore Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores

This paper discusses the progress on a project funded by the DOE Utah FORGE (Frontier Observatory for Research in Geothermal Energy) for the development of a subsurface heat exchanger for Enhanced Geothermal Systems (EGS) using unique casing sleeves cemented in place and are used ...

Fleckenstein, W. et al Colorado School of Mines

Oct 05, 2022
1 Resources
0 Stars
Publicly accessible

Applications of Fractured Continuum Model to Enhanced Geothermal System Heat Extraction Problems

This paper describes the applications of the fractured continuum model to the different enhanced geothermal systems reservoir conditions. The capability of the fractured continuum model to generate fracture characteristics expected in enhanced geothermal systems reservoir environm...

Kalinina, E. et al Sandia National Laboratories

May 06, 2014
1 Resources
0 Stars
Publicly accessible

High Temperature Chemical Sensing Tool: Preliminary pH and reference electrode test results

Project: High Temperature Chemical Sensing Tool for Distributed Mapping of Fracture Flow in EGS. Preliminary pH and reference electrode test results.

Cieslewski, G. Sandia National Laboratories

Sep 30, 2014
6 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: Magnetotelluric Inversion

The Coso Magnetotelluric (MT) dataset of which the West Flank FORGE MT data is a subset, was collected by Schlumberger / WesternGeco and initially processed by the WesternGeco GeoSolutions Integrated EM Center of Excellence in Milan, Italy. The 2011 data was based on 99 soundings ...

Blankenship, D. Sandia National Laboratories

May 16, 2016
1 Resources
0 Stars
Publicly accessible

Updated Overpressures and Permeability Values for PNNL's StimuFrac Fluid

A corrigendum was submitted to the journal of Geothermics on our article "Environmentally friendly, rheoreversible, hydraulic-fracturing fluids for enhanced geothermal systems" Shao et al Geothermics 58 (2015) 22-31. In the original article some permeability values were underesti...

Shao, H. et al Pacific Northwest National Laboratory

Apr 06, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection Measurements Workshop Presentation

This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection Measurements project by Stanford University, presented by Dr. Roland N. Horne. The project's objective was to make measurements in the Utah FORGE wells, both before and after fracturing experiments, to...

Horne, R. and Su, J. Stanford University

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Earthquake Catalog

This is the set of earthquake catalogs developed for the Utah FORGE project covering December of 2016 through March of 2018. These are discussed in the "Utah FORGE Phase 2B Final Topical Report," which can be found on GDR under id: 1038 (See link 'Final Topical Report' in resource...

Pankow, K. Energy and Geoscience Institute at the University of Utah

Mar 21, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Drilling Data for Student Competition

Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. This dataset includes both ...

Podgorney, R. et al Idaho National Laboratory

Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Planned Trajectory

This submission includes an Excel spreadsheet containing the Utah FORGE deep well 16A(78)-32 planned trajectory including UTM coordinates, elevations, and depths from the well head to the toe. This proposed new injection well is expected to descend vertically to a depth of approxi...

Podgorney, R. and Nash, G. Idaho National Laboratory

Mar 24, 2020
1 Resources
0 Stars
Publicly accessible

Brady's Geothermal Field Seismic Network Metadata

Brady's geothermal field seismic network station locations and dates of operation.

Foxall, W. University of Wisconsin

Dec 21, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE: AGRC GIS Database for the State of Utah

This is a link to the Automated Geographic Reference Center (AGRC) that houses GIS data for the state of Utah. This includes geoscience, cadastre, elevation and terrain, digital aerial photography, roads, aquifer data, etc. Several GIS datasets used in the Utah FORGE project origi...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 02, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Site Earthquake Animation

This is a .kml earthquake animation covering the period of 1991 2011 for the Utah Milford FORGE site. It displays seismic events using different sized bubbles according to magnitude. It covers the general Utah FORGE area (large shaded rectangle) with the final site displayed as a ...