Search GDR Data

Utah FORGE: Well Data for Student Competition

Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. Well Accord-1 was drilled decades ago for geothermal exploration purposes. While ...

Podgorney, R. et al Idaho National Laboratory

Dec 07, 2018
12 Resources
0 Stars
Publicly accessible

Microearthquake Studies at the Salton Sea Geothermal Field

The objective of this project is to detect and locate microearthquakes to aid in the characterization of reservoir fracture networks. Accurate identification and mapping of the large numbers of microearthquakes induced in EGS is one technique that provides diagnostic information w...

Templeton, D. Lawrence Livermore National Laboratory

Oct 01, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Well 16B(78)-32 Fiber-Optic Cable Installation Report

This is an installation report detailing placement of the integrated fiber-optic cable behind casing in Utah FORGE well 16B(78)-32. These activities occurred in July of 2023 immediately after the drilling of 16B. This report was prepared by the FOGMORE R&D project (Fiber Optic MOn...

Ajo-Franklin, J. et al Rice University

May 15, 2024
1 Resources
0 Stars
Curated

West Flank Coso FORGE: 3D Geologic Model

This is an x,y,z file of the West Flank FORGE 3D geologic model. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding algorithm. The da...

Blankenship, D. Sandia National Laboratories

Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

Fallon FORGE: 3D Geologic Model

An x,y,z scattered data file for the 3D geologic model of the Fallon FORGE site. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding al...

Blankenship, D. Sandia National Laboratories

Mar 01, 2016
1 Resources
0 Stars
Curated

GeoDAWN West Central Nevada EarthMRI Data

This submission includes both the original product resolution (OPR) and LiDAR point cloud (LPC) LiDAR data collected as part of GeoDAWN: Geoscience Data Acquisition for Western Nevada. The USGS Earth Mapping Resources Initiative (EarthMRI) and USGS 3D Elevation Program (3DEP), De...

National Geospatial Program, U. United States Geological Survey

May 15, 2023
7 Resources
0 Stars
Publicly accessible

Penrose Well Temperatures

Penrose Well Temperatures Geothermal waters have been encountered in several wells near Penrose in Fremont County, Colorado. Most of the wells were drilled for oil and gas exploration and, in a few cases, production. This ESRI point shapefile utilizes data from 95 wells in and a...

Christopherson, K. Flint Geothermal, LLC

Mar 15, 2013
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Wireline Geophysical Well Logs

This is the full wireline geophysical datasets for characterization of the EGS Collab Experiment #1 testbed on the 4850 level. A metadata file is included within the dataset explaining the logs, fracture picks, etc. Eight boreholes were drilled for this testbed and each one was lo...

Schwering, P. Lawrence Berkeley National Laboratory

Jan 08, 2018
1 Resources
0 Stars
Publicly accessible

OM300 Direction Drilling Module

OM300 Geothermal Direction Drilling Navigation Tool A prototype directional drilling navigation tool capable of high temperature operation in geothermal drilling with: Accuracies of 0.1 degree Inclination and Tool Face, 0.5 degree Azimuth Environmental Ruggedness typical of existi...

MacGugan, D. Honeywell International, Inc.

Aug 22, 2013
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3A Year 1 Annual Report for 2020

This is the Utah FORGE annual report for Phase 3A year 1, which was completed on December 28th, 2020. This report includes site infrastructure, site operations, seismic monitoring, a conceptual geological model, outreach, and communications for the Utah FORGE project during Phase ...

Moore, J. et al Energy and Geoscience Institute at the University of Utah

Dec 28, 2020
1 Resources
0 Stars
Curated

Caldwell Ranch Exploration and Confirmation Project, Northwest Geysers, CA: 2011 Geothermal Technologies Peer Review Project Summary

Caldwell Ranch Exploration and Confirmation Project, Northwest Geysers, CA: 2011 Geothermal Technologies Peer Review Project Summary The Caldwell Ranch Exploration and Confirmation Project was to drill, test, and confirm the present economic viability of the undeveloped geothermal...

Walters, M. Geysers Power Company, LLC

Jan 01, 2011
1 Resources
0 Stars
Publicly accessible

Geothermal Exploration Cost and Time

This paper describes the methodology used to define the baseline exploration suite of techniques (baseline), as well as the approach that was used to create the cost and time data set that populates the baseline. The resulting product, an online tool for measuring impact, and the ...

Jenne, S. National Renewable Energy Laboratory

Feb 13, 2013
1 Resources
0 Stars
Publicly accessible

Compiled Groundwater Chemistry Data and Identified Mineralogy for the Portland Basin CRBG Aquifer System as part of DDU Feasibility Study

Groundwater Chemistry data for the Portland Basin was compiled from published literature, as well as state and federal groundwater quality reports. Mineralogies were identified based on previous literature, as well as XRD and SEM analysis conducted at Portland State University. Up...

Svadlenak, E. Portland State University

Dec 03, 2018
3 Resources
0 Stars
Publicly accessible

Geothermal Exploration Cost and Time Metric

The National Renewable Energy Laboratory (NREL) was tasked with developing a metric in 2012 to measure the impacts of RD&D funding on the cost and time required for geothermal exploration activities. The development of this cost and time metric included collecting cost and time da...

Jenne, S. et al National Renewable Energy Laboratory

Jan 01, 2013
1 Resources
0 Stars
Publicly accessible

Development of a Downhole Tracer and pH Measurement Instrument for Application in Geothermal Wells

Due the high temperature and pressure conditions found in geothermal wells, tracer studies designed to elucidate properties of geothermal reservoirs are traditionally conducted by pulling liquid samples from the wellhead. These samples are then sent off for analysis in a fixed lab...

Hess, R. et al Sandia National Laboratories

Sep 11, 2013
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Microseismic Monitoring

A network of 16 three-component accelerometers and 24 hydrophones was installed as part of EGS Collab Experiment #2. These sensors were used to record both active-source shots and continuous waveforms throughout the experiment. This submission is accompanied by a detailed report....

Lawrence Berkeley National Laboratory

May 28, 2024
3 Resources
0 Stars
In progress

Utah FORGE: Updated Seismic Event Catalogue from the April, 2022 Stimulation of Well 16A(78)-32

These are revised catalogs, related to the April, 2022 well 16A(78)-32 stimulation (phases 1,2, & 3), provided by Geo Energie Suisse (GES) that include additional events at the start of Stage 1 and some tidying up of some locations. These catalogs also include events for additiona...

Dyer, B. et al University of Utah Seismograph Stations

Nov 09, 2022
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Circulation Testing

These data and test descriptions comprise a chilled circulation test conducted at the 164' fracture in the EGS Collab Experiment 1 testbed on the 4850 ft level of the Sanford Underground Research Facility. Descriptions of the meta data, design drawings for the flow testing system,...

Knox, H. et al Lawrence Berkeley National Laboratory

Apr 01, 2019
11 Resources
0 Stars
Publicly accessible

Fallon FORGE: Gravity and Magnetics Data

This package contains principal facts for new gravity data collected September November 2017 in support of the Fallon FORGE project. Also included are rock core density and magnetic susceptibility data for key core intervals, used in modeling 2D and 3D gravity inversions. Indivi...

Blankenship, D. et al Sandia National Laboratories

Mar 09, 2018
4 Resources
0 Stars
Publicly accessible

PoroTomo: Horizontal Distributed Acoustic Sensing (DAS) Measurements During an M 2.3 Explosion

Included here are Distributed Acoustic Sensing (DAS) data collected by the horizontal DAS array at Brady's Hot Springs Geothermal Field. The system recorded this data during an M 2.3 explosion at the Nevada Test Site (NTS), which is located approximately 400km southeast of the fie...

Kratt, C. et al Center for Transformative Environmental Monitoring Programs (CTEMPs)

Dec 18, 2018
5 Resources
0 Stars
Curated

Alternative Geothermal Power Production Scenarios

The information given in this file pertains to Argonne life-cycle analyses (LCAs) of the plant cycle stage for a set of ten new geothermal scenario pairs, each comprised of a reference and improved case. These analyses were conducted to compare environmental performances among the...

Sullivan, J. Argonne National Laboratory

Mar 14, 2014
1 Resources
0 Stars
Publicly accessible

Geothermal Thermoelectric Generation (G-TEG) with Integrated Temperature Driven Membrane Distillation and Novel Manganese Oxide for Lithium Extraction Final Report

This project aims to develop an innovative Geothermal ThermoElectric Generation (G-TEG) system specially designed to both generate electricity and extract high-value lithium (Li) from low-temperature geothermal brines. The process combined five modular technologies including silic...

Renew, J. et al Southern Research Institute

Mar 01, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Updated FMI Fracture Log from Well 16A(78)-32

This dataset consists of an Excel spreadsheet detailing the fracture picks from a reinterpretation of the formation micro-imaging (FMI) log from Utah FORGE well 16A(78)-32. The provided information details fracture location, geometry, and type. Also included here is a link to the...

Handwerger, D. Energy and Geoscience Institute at the University of Utah

Apr 17, 2024
3 Resources
0 Stars
Curated

WHOLESCALE: Mass Flux Rates for Wells at San Emidio in December 2016

This dataset provides mass flux rates in kg/s from six (production and injection) wells at San Emidio at minute intervals from December 1, 2016 December 15, 2016. Files for injection wells are named with "IW", for instance "WellIW42-21SI.csv", and include negative flux rates. Fil...

Cardiff, M. et al University of Wisconsin Madison

Dec 01, 2016
2 Resources
0 Stars
Curated

Utah FORGE: Well 16A(78)-32 Planned Trajectory

This submission includes an Excel spreadsheet containing the Utah FORGE deep well 16A(78)-32 planned trajectory including UTM coordinates, elevations, and depths from the well head to the toe. This proposed new injection well is expected to descend vertically to a depth of approxi...

Podgorney, R. and Nash, G. Idaho National Laboratory

Mar 24, 2020
1 Resources
0 Stars
Publicly accessible

<< Previous 6 7 8 9 10 11 12 13 14 15 Next >>