Search GDR Data

Showing results 51 - 75 of 202.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Technologies
Featured Projects
Topics
Data Type
"in-situ stress characterization"×
Geospatial Data×

New River Geothermal Exploration (Ram Power Inc.)

The New River Geothermal Exploration (DOE Award No. EE0002843) is located approximately 25km south of the Salton Sea, near town of Brawley in Imperial County and approximately 150km east of San Diego, California. A total of 182 MT Logger sites were completed covering the two sepa...
Mirza, R. and Data, E. Ram Power, Inc.
Nov 15, 2013
20 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: ArcGIS Data for Geologic Model

Archive of ArcGIS data from the West Flank FORGE site located in Coso, California. Archive contains the following eight shapefiles: Polygon of the 3D geologic model (WestFlank3DGeologicModelExtent) Polylines of the traces 3D modeled faults (WestFlank3DModeledFaultTraces) Polyline...
Sandia National Laboratories
Mar 01, 2016
2 Resources
0 Stars
Publicly accessible

Utah FORGE: InSAR Data Best Pairs

This submission provides Interferometric Synthetic Aperture Radar (InSAR) data covering the Utah FORGE site via the TerraSAR-X and TanDEM-X satellite missions operated by the German Space Agency (DLR). Data was collected between 2019/01/01 and 2023/06/30. Interferometric pairs (...
Batzli, S. and Feigl, K. University of Wisconsin Madison
May 31, 2023
11 Resources
0 Stars
Curated

Maps, Models and Data from Southeastern Great Basin PFA

This submission includes composite risk segment models in raster format for permeability, heat of the earth, and MT, as well as the final PFA model of geothermal exploration risk in Southwestern Utah, USA. Additionally, this submission has data regarding hydrothermally altered are...
Nash, G. Energy and Geoscience Institute at the University of Utah
Jun 30, 2017
7 Resources
0 Stars
Publicly accessible

Fallon FORGE: Gravity and Magnetics Data

This package contains principal facts for new gravity data collected September November 2017 in support of the Fallon FORGE project. Also included are rock core density and magnetic susceptibility data for key core intervals, used in modeling 2D and 3D gravity inversions. Indivi...
Blankenship, D. et al Sandia National Laboratories
Mar 09, 2018
4 Resources
0 Stars
Publicly accessible

AASG Wells Data for the EGS Test Site Planning and Analysis Task

AASG Wells Data for the EGS Test Site Planning and Analysis Task Temperature measurement data obtained from boreholes for the Association of American State Geologists (AASG) geothermal data project. Typically bottomhole temperatures are recorded from log headers, and this informat...
Augustine, C. National Renewable Energy Laboratory
Oct 09, 2013
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: 3D Geologic Model

This is an x,y,z file of the West Flank FORGE 3D geologic model. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding algorithm. The da...
Blankenship, D. Sandia National Laboratories
Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

Archuleta County CO Lineaments

This layer traces apparent topographic and air-photo lineaments in the area around Pagosa springs in Archuleta County, Colorado. It was made in order to identify possible fault and fracture systems that might be conduits for geothermal fluids. Geothermal fluids commonly utilize fa...
E., R. Flint Geothermal, LLC
Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Area LiDAR Bare Earth DEM Mosaic

This is a mosaic of 154 bare earth DEM panels (0.5 m resolution) acquired during Phase II of the Utah FORGE project. The DEM covers the western Mineral Mountains and adjoining basin including the Roosevelt Hot Springs area. The coordinates are in UTM Zone 12, NAD 83 and elevation ...
Nash, G. Energy and Geoscience Institute at the University of Utah
Aug 07, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Faults, Fractures, and Lineaments in the Mineral Mountains

This submission includes a shapefile of the Opal Mound Fault, and multiple datasets of lineaments mapped in the Mineral Mountains which overlook the Utah FORGE site, hyperlinked to rose diagrams in a polygon grid shapefile.
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 09, 2016
2 Resources
0 Stars
Publicly accessible

Utah FORGE: TEM and Gravity Data

This submission includes a gravity data in text format and as a GIS point shapefile and transient electromagnetic (TEM) raw data. Each text file additionally contains location data (UTM Zone 12, NAD83) and elevation (meters) data for that station. The gravity data shapefile was i...
Hardwick, C. and Nash, G. Energy and Geoscience Institute at the University of Utah
Feb 05, 2018
3 Resources
0 Stars
Publicly accessible

Gravity Data from Cove Fort and Dog Valley, Utah Play Fairway Analysis

This is a zipped archive containing an ArcGIS shapefile and a text file containing gravity data covering the Cove Fort and Dog Valley areas in central Utah. Part of the data was acquired by the Utah Geological Survey and part came from PACES (University of Texas El Paso). The attr...
Nash, G. and Hardwick, C. Energy and Geoscience Institute at the University of Utah
Aug 27, 2018
2 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: MT Station Locations

This data includes the locations of the MT data collected in and around the Coso Geothermal field that covered the West Flank area. These are the data that the 3D MT models were created from that were discussed in Phase 1 of the West Flank FORGE project. The projected coordinate ...
Blankenship, D. Sandia National Laboratories
May 04, 2011
1 Resources
0 Stars
Publicly accessible

Utah FORGE: InSAR Data

This is the InSAR dataset used in Utah FORGE Phase 2C to augment ground deformation monitoring. It is accompanied by a README.txt file which contains an explanation of the data in the .zip archive.
Feigl, K. et al Energy and Geoscience Institute at the University of Utah
Jul 01, 2019
2 Resources
0 Stars
Publicly accessible

3D Model of the Tuscarora Geothermal Area

The Tuscarora geothermal system sits within a ~15 km wide left-step in a major west-dipping range-bounding normal fault system. The step over is defined by the Independence Mountains fault zone and the Bull Runs Mountains fault zone which overlap along strike. Strain is transferre...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Fallon FORGE: Geodetic Data

Fallon FORGE InSAR and geodetic GPS deformation data. InSAR shapefiles are packaged together as .MPK (ArcMap map package, compatible with other GIS platforms), and as .CSV comma-delimited plaintext. GPS data and additional metadata are linked to the Nevada Geodetic Laboratory data...
Blankenship, D. et al Sandia National Laboratories
Feb 01, 2018
8 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: 3D Seismic Velocity Model and Updated Microseismic Catalog Using Transfer-Learning Aided Double-Difference Tomography

This package contains a 3D Seismic velocity model and an updated microseismic catalog associated with a proceedings paper (Chai et al., 2020) published in the 45th Workshop on Geothermal Reservoir Engineering. The 3D_seismic_velocity_model text file contains x (m), y(m), z(m), P-w...
Chai, C. et al Oak Ridge National Laboratory
Apr 20, 2020
7 Resources
0 Stars
Curated

Utah FORGE: Milford Gravity Data Shapefile

This is a zipped GIS compatible shapefile of gravity data points used in the Milford, Utah FORGE project as of March 21st, 2016. The shapefile is native to ArcGIS, but can be used with many GIS software packages. Additionally, there is a .dbf (dBase) file that contains the dataset...
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 13, 2016
1 Resources
0 Stars
Publicly accessible

Structural Orientations Adjacent to Some Colorado Geothermal Systems

Structural orientations (fractures, joints, faults, lineaments, bedding orientations, etc.) were collected with a standard Brunton compass during routine field examinations of geothermal phenomena in Colorado. Often multiple orientations were taken from one outcrop. Care was taken...
, R. Flint Geothermal, LLC
Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Favorable Geochemistry from Springs and Wells in Colorado

This layer contains favorable geochemistry for high-temperature geothermal systems, as interpreted by Richard "Rick" Zehner. The data is compiled from the data obtained from the USGS. The original data set combines 15,622 samples collected in the State of Colorado from several sou...
E., R. Flint Geothermal, LLC
Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Topographic and Air-Photo Lineaments in Various Locations Related to Geothermal Exploration in Colorado

These line shapefiles trace apparent topographic and air-photo lineaments in various counties in Colorado. It was made in order to identify possible fault and fracture systems that might be conduits for geothermal fluids, as part of a DOE reconnaissance geothermal exploration prog...
Zehner, R. Flint Geothermal, LLC
Feb 01, 2012
11 Resources
0 Stars
Publicly accessible

Improvements in 2016 to Natural Reservoir Analysis in Low-Temperature Geothermal Play Fairway Analysis for the Appalachian Basin

*These files add to and replace same-named files found within Submission 559 (hover over file display names to see actual file names in bottom-left corner of screen)* The files included in this submission contain all data pertinent to the methods and results of a cohesive multi-st...
Camp, E. Cornell University
Aug 18, 2016
16 Resources
0 Stars
Publicly accessible

Areas of Weakly Anomalous to Anomalous Surface Temperature in Alamosa and Saguache Counties, Colorado, as Identified from ASTER Thermal Data

This "Weakly Anomalous to Anomalous Surface Temperature" dataset differs from the "Anomalous Surface Temperature" dataset for this county (another remotely sensed CIRES product) by showing areas of modeled temperatures between 1o and 2o above the mean, as opposed to the greater th...
Hussein, K. Flint Geothermal, LLC
Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Penrose Well Temperatures

Penrose Well Temperatures Geothermal waters have been encountered in several wells near Penrose in Fremont County, Colorado. Most of the wells were drilled for oil and gas exploration and, in a few cases, production. This ESRI point shapefile utilizes data from 95 wells in and a...
Christopherson, K. Flint Geothermal, LLC
Mar 15, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Milford Site Location, Seismometer Locations, Basin Depth Models, and Potentiometric Contours

This submission includes the geographic extent shapefile of the Milford FORGE site located in Utah, along with a shapefile of seismometer positions throughout the area, and models of basin depth and potentiometric contours.
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 09, 2016
4 Resources
0 Stars
Publicly accessible
<< Previous1234567Next >>