Search GDR Data

West Flank Coso FORGE: Magnetotelluric Inversion

The Coso Magnetotelluric (MT) dataset of which the West Flank FORGE MT data is a subset, was collected by Schlumberger / WesternGeco and initially processed by the WesternGeco GeoSolutions Integrated EM Center of Excellence in Milan, Italy. The 2011 data was based on 99 soundings ...

Blankenship, D. Sandia National Laboratories

May 16, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Roosevelt Hot Springs Analytical Well-Based Temperature Model Data

This submission contains a cumulative record of one-dimensional temperature modeling based off of well data in the vicinity of the Utah FORGE site. Temperature log data from wells used, and in some cases were extrapolated below the bottom of a number of wells. The data were corre...

Podgorney, R. and Allis, R. Idaho National Laboratory

Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

Renewable Energy Potential Model: Geothermal Supply Curves

The Renewable Energy Potential (reV) model is a geospatial platform for estimating technical potential and developing renewable energy supply curves, initially developed for wind and solar technologies. The model evaluates deployment constraints, considering land use, environmenta...

Trainor-Guitton, W. et al National Renewable Energy Laboratory

Aug 21, 2023
3 Resources
0 Stars
Publicly accessible

Newberry FORGE: 3D Gravity Density Model for Newberry Volcano

These data are Pacific Northwest National Lab inversions of an amalgamation of two surface gravity datasets: Davenport-Newberry gravity collected prior to 2012 stimulations and Zonge International gravity collected for the project "Novel use of 4D Monitoring Techniques to Improve...

Bonneville, A. Pacific Northwest National Laboratory

Mar 11, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Magnetotelluric (MT) Data

New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...

Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah

Oct 01, 2020
5 Resources
0 Stars
Publicly accessible

Utah FORGE: 3D Gravity Data

These resources describe the 3D geophysical inversion modeling of gravity data at the FORGE site near Milford, Utah. FORGE is the Frontier Observatory for Research in Geothermal Energy and the site in Utah has been selected by the U.S. Dept. of Energy for a 5-year R&D program to t...

Hardwick, C. and Witter, J. Energy and Geoscience Institute at the University of Utah

Jun 24, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase Native State FALCON Model Files

The submission includes FALCON input file and mesh for the an initial pressure-temperature simulation, and a second set for pressure-temperature-displacement simulation. All simulations are steady state. Data and input for the FORGE Phase 2 native state model were compiled from hi...

Podgorney, R. Idaho National Laboratory

Jun 06, 2019
2 Resources
0 Stars
Curated

EGS Collab Experiment 1: Baseline Cross-well Seismic

As part of the geophysical characterization suite for the first EGS Collab tesbed, here are the baseline cross-well seismic data and resultant models. The campaign seismic data have been organized, concatenated with geometry and compressional (P-) & and shear (S-) wave picks, and ...

Schwering, P. et al Sandia National Laboratories

Apr 30, 2018
9 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Earth Model Datasets

The EGS Collab Project performed a series of tests to increase the understanding the response of crystalline rock mass to stimulations and fluid circulation to efficiently implement enhanced geothermal systems (EGS) technologies. The EGS Collab team created two underground testbed...

Neupane, G. et al Idaho National Laboratory

May 29, 2022
6 Resources
0 Stars
Publicly accessible

Fallon FORGE: 3D Geologic Model

The 3D geologic model for the Fallon for site was constructed in EarthVision software using methods similar to (Moeck et al., 2009, 2010; Faulds et al., 2010b; Jolie et al., 2012, 2015; Hinz et al., 2013a; Siler and Faulds, 2013; Siler et al., 2016a, b) References are included in ...

Blankenship, D. and Siler, D. Sandia National Laboratories

Mar 01, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Curated

Fallon FORGE: Gravity and Magnetics Data

This package contains principal facts for new gravity data collected September November 2017 in support of the Fallon FORGE project. Also included are rock core density and magnetic susceptibility data for key core intervals, used in modeling 2D and 3D gravity inversions. Indivi...

Blankenship, D. et al Sandia National Laboratories

Mar 09, 2018
4 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Development of 3-D Structural Surface Model for the Tuscarora Sandstone, Morgantown, WV

This dataset contains grid files for subsurface maps created in GES interpretation software and exported as Zmap formated grid files. Depth values in SSTVD (subsea true vertical depth). The methods used for analysis and a detailed discussion of the results are presented in a paper...

McCleery, R. et al West Virginia University

Dec 19, 2019
3 Resources
0 Stars
Publicly accessible

Simulating Complex Fracture Systems in Geothermal Reservoirs Using an Explicitly Coupled Hydro-Geomechanical Model

Low permeability geothermal reservoirs can be stimulated by hydraulic fracturing to create Enhanced (or Engineered) Geothermal Systems (EGS) with higher permeability and improved heat transfer to increase heat production. In this paper, we document our effort to develop a numerica...

Carrigan, C. et al Lawrence Livermore National Laboratory

Jan 01, 2011
2 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32

This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-...

Lu, G. et al University of Pittsburgh

Aug 30, 2024
2 Resources
0 Stars
Curated

Utah FORGE: Seismic Velocity Models, February 2021

This dataset contains a map, showing the Utah FORGE seismic stations, and seismic velocity model data. There are 61 1-D velocity models which are in a compressed TAR file. A paper is referenced at the end of this description which discusses the use of these data in 3D modelling. T...

Pankow, K. Energy and Geoscience Institute at the University of Utah

Feb 28, 2021
3 Resources
0 Stars
Publicly accessible

A Thermal-Hydrological-Chemical Model for the EGS Demonstration Project at Newberry Volcano, OR

Newberry Volcano in Central Oregon is the site of a Department of Energy funded Enhanced Geothermal System (EGS) Demonstration Project. Stimulation and production of an EGS is a strong perturbation to the physical and chemical environment, giving rise to coupled Thermal-Hydrologic...

Sonnenthal, E. et al National Energy Technology Laboratory

Jan 30, 2012
1 Resources
0 Stars
Publicly accessible

Modeling Responses of Naturally Fractured Geothermal Reservoir to Low-Pressure Stimulation

Hydraulic shearing is an appealing reservoir stimulation strategy for Enhanced Geothermal Systems. It is believed that hydro-shearing is likely to simulate a fracture network that covers a relatively large volume of the reservoir whereas hydro-fracturing tends to create a small nu...

Fu, P. and Carrigan, C. Lawrence Livermore National Laboratory

Jan 01, 2012
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Heat Flow Contours and Well Data

This submission contains a shapefile of heat flow contour lines around the FORGE site located in Milford, Utah. The model was interpolated from data points in the Milford_wells shapefile. This heat flow model was interpolated from 66 data points using the kriging method in Geostat...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 09, 2016
2 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2514: A Strain Sensing Array to Characterize Deformation at the FORGE Site Workshop Presentation

This is a presentation on the Strain Sensing Array to Characterize Deformation at the FORGE Site project by Clemson University, presented by Lawrence Murdoch. The project's objective was to evaluate the feasibility of measuring and interpreting tensor strain data to improve the pe...

Murdoch, L. et al Clemson University

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: ArcGIS Data for Geologic Model

Archive of ArcGIS data from the West Flank FORGE site located in Coso, California. Archive contains the following eight shapefiles: Polygon of the 3D geologic model (WestFlank3DGeologicModelExtent) Polylines of the traces 3D modeled faults (WestFlank3DModeledFaultTraces) Polyline...

Sandia National Laboratories

Mar 01, 2016
2 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2446: Report on Phase Field Modelling of Near-Wellbore Hydraulic Fracture Nucleation and Propagation

This is a report that describes the modelling of fracture nucleation and propagation in the near-wellbore region to understand the relationship between in situ stress and fracture patterns. A novel phase field formulation is described here, which represents fractures as a diffuse ...

Cusini, M. and Fei, F. Lawrence Livermore National Laboratory

Dec 31, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Data for 3-D Model Development Lithology, Temperature, Pressure, and Stress

This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. T...

Podgorney, R. Idaho National Laboratory

Mar 17, 2020
2 Resources
0 Stars
Publicly accessible

Improved Microseismicity Detection During Newberry EGS Stimulations

Effective enhanced geothermal systems (EGS) require optimal fracture networks for efficient heat transfer between hot rock and fluid. Microseismic mapping is a key tool used to infer the subsurface fracture geometry. Traditional earthquake detection and location techniques are oft...

Templeton, D. Lawrence Livermore National Laboratory

Nov 01, 2013
1 Resources
0 Stars
Publicly accessible

Snake River Plain FORGE: Site Characterization Data

The site characterization data used to develop the conceptual geologic model for the Snake River Plain site in Idaho, as part of phase 1 of the Frontier Observatory for Research in Geothermal Energy (FORGE) initiative. This collection includes data on seismic events, groundwater,...

Moos, D. and Barton, C. Idaho National Laboratory

Apr 18, 2016
49 Resources
0 Stars
Curated

<< Previous 1 2 3 4 5 6 7 Next >>