Search GDR Data
Showing results 1 - 25 of 43.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
Structural orientations (fractures, joints, faults, lineaments, bedding orientations, etc.) were collected with a standard Brunton compass during routine field examinations of geothermal phenomena in Colorado. Often multiple orientations were taken from one outcrop. Care was taken...
This dataset contains a reinterpretation of the trip 3, Thrubit FMI log from Utah FORGE well 16B(78)-32, covering measured depths from 6,254 to 10,839 feet. Acquired by Schlumberger on May 23, 2023, this version includes newly interpreted tensile drilling-induced fractures, in add...
This is a link to the Utah Geological Survey's Utah FORGE Interactive Geoscience Map. The map layers include information on geology, geography, subsurface temperatures, seismicity, gravity and groundwater. Instructions for using the interactive map and a legend for the interactive...
The University of Utah Seismograph Stations (UUSS) are responsible for the seismic monitoring of the experiments and have installed a series of permanent surface and borehole seismic instruments around the Utah FORGE project site. This report discusses the methods used for proper ...
Compilation of results for mechanical and fluid flow properties of analogue outcrop samples experimental data for compressional and shear wave velocities, tensile strengths, and compressive strengths. Outcrop location and sample orientation data are documented in a separate csv file.
Document describing the methodology used to determine the accelerometers' three-component orientations at the first EGS Collab testbed using Continuous Active-Source Seismic Monitoring (CASSM) data and hodogram analysis.
Original submission: gdr.openei.org/submissions/1166
The EGS Collab is conducting experiments in hydraulic fracturing at a depth of 1.5 km in the Sanford Underground Research Facility (SURF) on the 4850 Level. A total of eight ~60m-long subhorizontal boreholes were drilled at that depth on the western rib of the West Access Drift. S...
The EGS Collab project is evaluating a site for Experiment 2 (hydraulic fracturing/shearing) at a depth of 1.25 km in the Sanford Underground Research Facility (SURF) on the 4100 Level. Two early test holes were drilled in an alcove (formerly known as Battery Charging Station) nea...
This submission includes a shapefile of the Opal Mound Fault, and multiple datasets of lineaments mapped in the Mineral Mountains which overlook the Utah FORGE site, hyperlinked to rose diagrams in a polygon grid shapefile.
The Utah FORGE 2025 v1 DFN (fracture model) includes 131 discrete planar fractures which were identified using combined site data sets to capture flow pathways between wells 16A(78)-32 and 16B(78)-32 following stimulation activities in 2022 and 2024. It also includes stochastic fr...
The STRESSINVERSE code uses an iterative method to find the nodal planes most consistent with the stress field given fault frictional properties. STRESINVERSE inverts the strike, rake and dip from moment tensor solutions for the in-situ state of stress. The code iteratively solves...
This data set includes sidewall core data from well Cornell ESH #1 (API 31109300030000), known as the Cornell University Borehole Observatory, or CUBO. It is a stratigraphic well drilled to characterize potential EGS resources. The Drilling commenced on June 21, 2022 and total dep...
This dataset contains borehole logging data acquired in March-July 2022 from Fervo Energy geothermal wells in the Blue Mountain Geothermal Field, Humboldt County, Nevada. The submission includes casing inspection and cement evaluation logs, directional and trajectory measurements,...
Aeromagnetic data was collected over the Indian Wells Valley, CA in November 1994. It consisted of 9,033 line-kilometers covering ~4,150 square kilometers, flown at a 250 meter drape with principal line spacing of 0.54 kilometers and 10% cross-lines. The principal orientation is N65E.
The paper linked below offers an initial assessment of a new method to target potential geothermal resources on the regional scale. The method is based on seeking relationships between geologic structures and geodetic observations of regional tectonic strain.
This dataset contains the north seeking gyro data for each of the 11 boreholes drilled at the Experiment 2 testbed on the 4100 foot level of the SURF (Sanford Underground Research Facility). Each gyro file is in individual folders for each well. A single folder called 'E2 All Well...
Understanding the initiation and arrest of earthquakes is one of the long-standing challenges of seismology. Here we report on direct observations of borehole displacement by a meter-sized shear rupture induced by pressurization of metamorphic rock at 1.5 km depth. We observed the...
The objective of this project is to detect and locate microearthquakes to aid in the characterization of reservoir fracture networks. Accurate identification and mapping of the large numbers of microearthquakes induced in EGS is one technique that provides diagnostic information w...
This is a presentation on the Application of Advanced Techniques for Determination of Reservoir-Scale Stress State at FORGE by the University of Oklahoma, presented by Ahmad Ghassemi. This video discusses how magnitude and orientation of natural in-situ principal stresses at dept...
Structural controls of 426 geothermal systems in the Great Basin region including western Nevada, central Nevada, northwestern Nevada, northeastern Nevada, east-central Nevada, eastern California, southern Oregon, and western Utah were analyzed with literature research, air photos...
This report presents a series of numerical experiments investigating the relationships among near-well fracture complexity, in situ stress conditions, and wellbore deviation. Using a phase-field modeling approach, the study explores how factors such as stress regimes, wellbore ori...
This dataset contains Interferometric Synthetic Aperture Radar (InSAR) data used for ground deformation monitoring during Phase 2C of the Utah FORGE project. The dataset includes measurements of the mean rate of range change and associated standard errors, provided in both CSV and...
This report describes minifrac tests conducted in the 16B(78)-32 well at the Utah FORGE site to characterize subsurface stresses, including the magnitude and orientation of the minimum and maximum horizontal stresses and the magnitude of the vertical stress. A minifrac test was co...
Shapefiles and spreadsheets of structural data, including attitudes of faults and strata and slip orientations of faults.
Detailed geologic mapping of ~30 km2 was completed in the vicinity of the Columbus Marsh geothermal field to obtain critical structural data that would elucid...
Hydraulic fracturing is currently the primary method for stimulating low-permeability geothermal reservoirs and creating Enhanced (or Engineered) Geothermal Systems (EGS) with improved permeability and heat production efficiency. Complex natural fracture systems usually exist in ...
Google Map