Search GDR Data

Utah FORGE: Hydrothermal Friction-Hydraulic Transmissivity Laboratory Experiments

Submission includes data from laboratory slide-hold-slide tests, combined with flow through tests, conducted on Westerly granite with 30 degree sawcut. Tests were conducted with a constant confining pressure of 30 MPa with an average pore pressure of 10 MPa at temperatures of 23 a...

Jeppson, T. and Lockner, D. United States Geological Survey

Feb 24, 2022
1 Resources
0 Stars
Curated

Utah FORGE 1-2551: Development of a Multi-Stage Fracturing System and Wellbore Tractor 2024 Annual Workshop Presentation

This is a presentation on the Development of a Multi-Stage Fracturing System and Wellbore Tractor by Colorado School of Mines, presented by William Fleckenstein. This video describes (1) the development and use of a low-cost and rapid multistage fracture stimulation technology wit...

Fleckenstein, W. Energy and Geoscience Institute at the University of Utah

Jan 13, 1970
1 Resources
0 Stars
Curated

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All expe...

Yu, J. et al Pennsylvania State University

Jul 01, 2023
27 Resources
0 Stars
Curated

Utah FORGE 1-2551: Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores Workshop Presentation and Report

Included here are a presentation recording, slides, and report on the Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores project by Colorado School of Mines, presented by Dr. William W. Fleckenstei...

Fleckenstein, W. et al Colorado School of Mines

Sep 08, 2023
3 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2428: Coupled Investigation of Fracture Permeability Impact on Reservoir Stress and Seismic Slip 2024 Annual Workshop Presentation

This is a presentation on the Coupled Investigation of Fracture Permeability Impact on Reservoir Stress and Seismic Slip Behavior by Lawrence Livermore National Laboratory, presented by Kayla Kroll. This presentation addresses testing and modelling related to the dependency of EG...

Kroll, K. et al Energy and Geoscience Institute at the University of Utah

Aug 27, 2024
1 Resources
0 Stars
Curated

Utah FORGE: Reports on Northwestern Nevada Well Doublet Drilling and Testing by Fervo Energy

These reports review Fervo Energy's construction of a commercial enhanced geothermal system (EGS). Fervo has qualified full functionality of the system through production testing at commercially relevant operating conditions. The project site is located in a nearfield setting ad...

Dadi, S. et al Fervo Energy

Sep 05, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Laboratory Experiments Examining the Effect of Thermal and Mechanical Processes on Hydraulic Transmissivity Evolution

Using laboratory slide-hold-slide experiments, at temperatures from 22 to 200 degrees C, to examine effects of fracture reactivation and quasi-static loading on the evolution of fluid transport properties of simulated fractures in Westerly granite. At all temperatures, the in-plan...

Lockner, D. et al United States Geological Survey

Apr 03, 2023
2 Resources
0 Stars
Curated

Utah FORGE: Raw Microgravity Composite Data Updated 10/2021

This is a microgravity dataset from the Utah FORGE site near Milford, Utah. This composite dataset was updated in October, 2021 and contains data from December 17th, 2018 through September 24th, 2021. The data includes the GPS location of the measurement, date of the measurement, ...

Hardwick, C. Utah Geological Survey

Oct 01, 2021
1 Resources
0 Stars
Curated

Utah FORGE: Heat Flow Contours and Well Data

This submission contains a shapefile of heat flow contour lines around the FORGE site located in Milford, Utah. The model was interpolated from data points in the Milford_wells shapefile. This heat flow model was interpolated from 66 data points using the kriging method in Geostat...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 09, 2016
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Evaluation of Potential Geochemical Responses to Injection in the FORGE Geothermal Reservoir

Plugging of fracture porosity from mineral precipitation due to injecting cold water into a a geothermal reservoir can impact the overall permeability of the fracture network in the reservoir. This can have serious ramifications on the efficiency of the geothermal resource. Geoche...

Patil, V. and Simmons, S. Energy and Geoscience Institute at the University of Utah

Apr 03, 2019
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Microgravity Data

A 4D microgravity survey began in early 2019 in order to benchmark surface and subsurface elevations prior to Phase 3 drilling and stimulation campaigns. Microgravity stations are collocated with GPS deformation benchmarks and use the same location survey data. Surveys are underta...

Hardwick, C. Utah Geological Survey

Oct 07, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Report and Associated Data from Measuring and Modeling Deformation 2018 through 2024

The report provided here describes research activities between August 16th, 2018 and July 30th, 2024. The goals of the research activities are to conduct an Interferometric Synthetic Aperture Radar (InSAR) analysis and Ground Surface Deformation Modeling at the Utah FORGE site. In...

Feigl, K. and Batzli, S. University of Wisconsin Madison

Aug 16, 2018
6 Resources
0 Stars
Curated

Utah FORGE 4-2541: Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design Workshop Presentation

This is a presentation on the Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design at Utah FORGE project by Fervo Energy, presented by Sireesh Dadi. The project's objective was to develop a multistage hydraulic stimulation approach designed specifically to t...

Dadi, S. and Norbeck, J. Fervo Energy

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Injection Test Data

This submission contains pressure and flow time series data from the reservoir testing of Well 58-32. These activities were part of the Utah FORGE Phase 2B site suitability confirmatory testing.

Podgorney, R. and McLennan, J. Idaho National Laboratory

Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Extended Circulation Test Data August and September 2024

The dataset includes data collected during an extended circulation test conducted at the Utah FORGE site between August 8 and September 5, 2024. It provides uncorrected, raw digital data from the test, along with calibration information and a final report detailing the test proced...

McLennan, J. et al Energy and Geoscience Institute at the University of Utah

Oct 11, 2024
1 Resources
0 Stars
Curated

Utah FORGE: Development of Multi-Stage Fracturing System and Wellbore Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores

This paper discusses the progress on a project funded by the DOE Utah FORGE (Frontier Observatory for Research in Geothermal Energy) for the development of a subsurface heat exchanger for Enhanced Geothermal Systems (EGS) using unique casing sleeves cemented in place and are used ...

Fleckenstein, W. et al Colorado School of Mines

Oct 05, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 56-32 Drilling Data and Logs

This dataset consists of drilling data (Pason data spreadsheets, daily reports, days v. depth, mud logs), Schlumberger logs (FMI, shear anisotropy analysis, memory, sonic, array induction/spectral density/dual spaced neutron/gamma ray/caliper, spectral GR/temperature, and Gardner ...

Bristol, J. et al Energy and Geoscience Institute at the University of Utah

Mar 19, 2021
18 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Stimulation Tracer Test Results

This archive contains data from the tracer test performed during the Utah FORGE well 16A(78)-32 stimulation. This includes: 1. the raw data file from Pason in the csv format; 2. a one-page Word document from Pason that explains the headers and units used in their data file; 3. an...

Rose, P. and Barker, B. Energy and Geoscience Institute at the University of Utah

Sep 16, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 and 16B(78)-32 Stimulation Production Logging Tests

These are production logging tests (PLT) results from Halliburton collected during the nine hour circulation test performed at Utah FORGE on April 27th, 2024. The circulation test involved injecting into well 16A(78)-32 and producing out of well 16B(78)-32) and was carried out af...

Haroun, F. Energy and Geoscience Institute at the University of Utah

Apr 27, 2024
4 Resources
1 Stars
Publicly accessible

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Circulation Test Daily Reports from August 2024

These are the daily reports created during and around the August 2024 circulation test done on wells 16A(78)-32 and 16B(78)-32 at the Utah FORGE site. Information about the rig activity during this period includes details on rig up, depths, pumping, water temperature, safety, and ...

Swearingen, L. Energy and Geoscience Institute at the University of Utah

Oct 04, 2024
1 Resources
0 Stars
Curated

Utah FORGE 1-2410: Development of a Smart Completion and Stimulation Solution 2024 Annual Workshop Presentation

This is a presentation on the Development of a Smart Completion & Stimulation Solution by Welltec, presented by Ricardo Vasques. This video slide presentation discusses the development of an (1) annular isolation system, (2) a stimulation isolation system, and (3) a multi open-cl...

Esquitin, Y. et al Energy and Geoscience Institute at the University of Utah

Sep 15, 2024
1 Resources
0 Stars
Curated

Utah FORGE: Friction-Permeability-Seismicity Laboratory Experiments with Non-Linear Acoustics

Laboratory experimental data on saw-cut interface of Westerly Granite and Utah Forge granitoid rocks. Experiments include velocity-stepping and fluid pressure stepping experiments. Mechanical data from 3 ISCO pumps connected to a Temco pressure vessel measure axial, confining and ...

Eijsink, A. and Elsworth, D. Pennsylvania State University

Jul 08, 2022
2 Resources
0 Stars
Curated

Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection 2024 Annual Workshop Presentation

This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection by Stanford University and Sandia National Laboratory, presented by Roland Horde. This is a video presentation on wells, both before and after stimulation, using chloride or other ions to map fractures ...

Horne, R. and Schneider, M. Energy and Geoscience Institute at the University of Utah

Sep 13, 2024
1 Resources
0 Stars
Curated

Utah FORGE 8-3637: Integrated Diagnostics for Interpreting Doublet Heat Sweep Efficiency 2024 Annual Workshop Presentation

This is a presentation on the Integrated Diagnostics for Interpreting Doublet Heat Sweep Efficiency by Texas Tech University, presented by Smith Leggett. This video slide presentation discusses the ID squared technical objectives to develop and integrate diagnostic tools to deter...

Leggett, S. Energy and Geoscience Institute at the University of Utah

Sep 14, 2024
1 Resources
0 Stars
Curated

Utah FORGE: GIS Well Temperature Data

This is a GIS point feature shapefile representing wells, and their temperatures, that are located in the general Utah FORGE area near Milford, Utah. There are also fields that represent interpolated temperature values at depths of 200 m, 1000 m, 2000 m, 3000 m, and 4000 m. in deg...

Gwynn, M. et al Energy and Geoscience Institute at the University of Utah

Feb 28, 2018
1 Resources
0 Stars
Publicly accessible

1 2 3 Next >>