Search GDR Data
Showing results 1 - 25 of 294.
Show
results per page.
Order by:
Available Now:
Technologies
Featured Projects
Topics
Data Type
Utah FORGE Well 58-32 Granite Core Thermal Properties Test Results Report (Oct. 2021)
This is a presentaiton from Metarock Laboratories on the thermal properties of Utah FORGE well 58-32 granite core. The presentation includes pictures of core samples, core details for the samples (sample depths and size), sample thermal expansion test results, and radial velocity ...
Laboratories, M. Energy and Geoscience Institute at the University of Utah
Oct 29, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE Report on the Thermal Properties of Wells 16A(78)-32 & 58-32 Granite
This is a report from Metarock Laboratories on the thermal properties of Utah FORGE wells 16A(78)-32 & 58-32 granite. The report includes pictures of core samples, core details for the samples (where the sample was taken and the size of the sample), sample thermal expansion test r...
Laboratories, M. et al Energy and Geoscience Institute at the University of Utah
May 04, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE 5-2565: Hydrothermal Evolution of Fracture Properties Workshop Presentation
This is a presentation on the Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions project by the U.S. Geological Survey, presented by Dr. David Lockner. The project's objective was to determine how thermal, hydraulic, mechanical, and ch...
Lockner, D. et al U.S. Geological Survey
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Final Topical Report 2018
This is the final topical report for the Phase 2B Utah FORGE project, which is located near Roosevelt Hot Springs, Utah. This PDF format report details results associated with the conceptual geologic model, deep well 58-32, rock geomechanics, reservoir temperatures, seismic survey...
Moore, J. et al Energy and Geoscience Institute at the University of Utah
Apr 07, 2018
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Slide-Hold-Slide Experiments on Westerly Granite at Temperatures up to 250 Degrees C
Laboratory slide-hold-slide tests were conducted in a conventional triaxial deformation configuration on 1-inch diameter cylindrical cores of Westerly granite bisected by a sawcut oriented at 30 degrees from vertical. Tests were conducted at a constant confining pressure of 30 MPa...
Jeppson, T. et al U.S. Geological Survey
Oct 10, 2023
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE 5-2557: Trixial Shear and Wellbore Breakout Tests Report and Data
Included are a report and data from triaxial shear tests on simulated Sierra White fault gouge and a borehole stimulation experiment. This serves as a progress report for the Role of Fluid and Temperature in Fracture Mechanics and Coupled Thermo-Hydro-Mechanical-Chemical (THMC) P...
Choens, C. and Yoon, H. Sandia National Laboratories
Apr 19, 2023
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Rock Properties
This is an Excel spreadsheet that contains rock properties from several wells in the Utah FORGE study area. This includes a map of the wells. Data is described in the Final Topical Report included in the resources below.
Gwynn, M. Energy and Geoscience Institute at the University of Utah
Apr 07, 2018
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Well 58-32 Core Analyses
This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF format, and spreadsheets containing tables from the reports as part of Utah FORGE Phase 2B. Please refer to the repor...
McLennan, J. Energy and Geoscience Institute at the University of Utah
May 30, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE 4-2541: Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design Workshop Presentation
This is a presentation on the Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design at Utah FORGE project by Fervo Energy, presented by Sireesh Dadi. The project's objective was to develop a multistage hydraulic stimulation approach designed specifically to t...
Dadi, S. and Norbeck, J. Fervo Energy
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Shear Induced Permeability Test: Stripa Granite X-Ray CT Files and Explanation
This folder contains X-ray CT images and an explanation related to the shear induced permeability testing of Stripa granite
Kneafsey, T. Lawrence Berkeley National Laboratory
Jan 21, 2014
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: 2023 Large Upscaled Discrete Fracture Network Models
This dataset includes the data and a report on the large upscaled discrete fracture network modeling done for the Utah FORGE project in 2023. The FORGE modeling team is making five discrete fracture network (DFN) realizations of a large reservoir model available to researchers. Th...
Finnila, A. Energy and Geoscience Institute at the University of Utah
Oct 02, 2023
17 Resources
0 Stars
Publicly accessible
17 Resources
0 Stars
Publicly accessible
Utah FORGE: Well 58-32 (MU-ESW1) FMI Log Fracture Results
A Schlumberger Fullbore Formation Micro-Imager (FMI) log was run from 7390 feet to 7527 feet depth in well 58-32, originally known as well MU-ESW1. Well 58-32 was completed in 2017 as part of Utah FORGE Phase 2. It reached a depth of 7536 feet and recorded a bottom hole temperatur...
BLOCHOWICZ, A. Energy and Geoscience Institute at the University of Utah
Mar 06, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Optimization of a Plug-and-Perf Stimulation (Fervo Energy)
Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy.
Objective and Purpose:
Develop a multistage hydraulic stimulation approach designed specifically to target the top three factors that control the technical and commercial viability of an EGS sys...
Norbeck, J. et al Fervo Energy
Feb 08, 2023
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Utah FORGE: 3D Gravity Data
These resources describe the 3D geophysical inversion modeling of gravity data at the FORGE site near Milford, Utah. FORGE is the Frontier Observatory for Research in Geothermal Energy and the site in Utah has been selected by the U.S. Dept. of Energy for a 5-year R&D program to t...
Hardwick, C. and Witter, J. Energy and Geoscience Institute at the University of Utah
Jun 24, 2019
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE 3-2535: Joint EM-Seismic-InSAR Imaging of Fracture Properties Workshop Presentation
This is a presentation on the Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development project by Lawrence Berkeley National Laboratory, presented by Dr. David Alumbaugh, Staff Sc...
Alumbaugh, D. Lawrence Berkeley National Laboratory
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE Project 2439: A Multi-Component Approach to Characterizing In-Situ Stress
Core-based in-situ stress estimation, Triaxial Ultrasonic Velocity (labTUV) data, and Deformation Rate Analysis (DRA) data for Utah FORGE well 16A(78)-32 using triaxial ultrasonic velocity and deformation rate analysis. Report documenting a multi-component approach to characterizi...
Bunger, A. et al Battelle Memorial Institute
Dec 13, 2022
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Utah FORGE Project 3-2417: Distributed Acoustic Sensing Strain Signatures as an Indicator of Fracture Connectivity in Enhanced Geothermal Systems
Stimulated fracture connectivity between injector and producer is a critical prerequisite for efficient EGS thermal recovery. Some stimulated fractures may be incomplete, approaching but not intersecting the production well. These ?near-miss? fractures can be addressed in future s...
Ward-Baranyay, M. et al Rice University
Jan 01, 2023
4 Resources
0 Stars
Awaiting curation
4 Resources
0 Stars
Awaiting curation
Utah FORGE: Stress Logging Data
This spreadsheet consist of data and graphs from deep well 58-32 stress testing from 6900 7500 ft depth. Measured stress data were used to correct logging predictions of in situ stress. Stress plots shows pore pressure (measured during the injection testing), the total vertical in...
McLennan, J. Energy and Geoscience Institute at the University of Utah
Mar 14, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE Project 3-2535: Compilation of Geodetic Data and Estimation of Associated Deformation
Report on possible geodetic signature of the 3 stimulations in April 2022 as well as a comparison with existing InSAR data gathered over the site before, during, and after the stimulation. In geothermal production it is important to understand the existing stress field and the cha...
Vasco, D. et al Lawrence Berkeley National Laboratory
Apr 29, 2022
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Finite Element Analysis (FEA) for Water-Foam Fracturing of Granite Rock
In addition to the foam data that were obtained from literature and that were collected from the current study, simulation data was also generated from finite element analysis (FEA) conducted in this study using COMSOL Multiphysics software. The FEA models were built to simulate t...
Thakor, V. et al Temple University
May 04, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Earth Model Native State Simulation Results
Utah FORGE phase 2C Native State Simulation zip contains the data used for the boundary conditions and subsequent native state simulation results obtained using the simulation code FALCON. Data are from the nodes of the simulation domain, with used a uniform 50m spacing over a 250...
Podgorney, R. Energy and Geoscience Institute at the University of Utah
Jul 16, 2019
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE Project 2439: Report on Minifrac Tests for Stress Characterization
This report describes minifrac tests conducted in the 16B(78)-32 well at the Utah FORGE site to characterize subsurface stresses, including the magnitude and orientation of the minimum and maximum horizontal stresses and the magnitude of the vertical stress. A minifrac test was co...
Kelley, M. et al Battelle Memorial Institute
Feb 22, 2024
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Evaluation of Potential Geochemical Responses to Injection in the FORGE Geothermal Reservoir
Plugging of fracture porosity from mineral precipitation due to injecting cold water into a a geothermal reservoir can impact the overall permeability of the fracture network in the reservoir. This can have serious ramifications on the efficiency of the geothermal resource. Geoche...
Patil, V. and Simmons, S. Energy and Geoscience Institute at the University of Utah
Apr 03, 2019
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Well Data for Student Competition
Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site.
Well Accord-1 was drilled decades ago for geothermal exploration purposes. While ...
Podgorney, R. et al Idaho National Laboratory
Dec 07, 2018
12 Resources
0 Stars
Publicly accessible
12 Resources
0 Stars
Publicly accessible
Utah FORGE: Phase 2C Seismic Observation and Ground Water Well Data and Well Locations
This submission contains the following data associated with Utah FORGE Phase 2C within the Roosevelt Hot Springs geothermal area:
An ArcGIS shapefile with well locations for wells 58-32, 78-32, 68-32, OH-3, OH-4, WOW-2, and WOW-3. Well 58-32 is the deep test well, wells 68-32 an...
Abraham, S. et al Energy and Geoscience Institute at the University of Utah
Mar 26, 2019
6 Resources
0 Stars
Publicly accessible
6 Resources
0 Stars
Publicly accessible