Search GDR Data
Showing results 1 - 25 of 623.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
Utah FORGE held a two-day seismic workshop on the University of Utah campus in Salt Lake City, Utah on September 26 and 27, 2022 to share what was learned from the seismic monitoring during the 2022 stimulation. This is a report documenting this workshop. The meeting was structure...
This dataset contains seismic event detections acquired using the 151 Nodal geophones deployed at the Utah FORGE site in April 2019. Details regarding the publishing are available in the paper linked below (Mesimeri, M. and K. L. Pankow et al. 2020). A frequency-domain-based algor...
The University of Utah Seismograph Stations (UUSS) are responsible for the seismic monitoring of the experiments and have installed a series of permanent surface and borehole seismic instruments around the Utah FORGE project site. This report discusses the methods used for proper ...
This is a CSV spreadsheet containing UTM and Latitude and Longitude coordinates and elevations for Wells 78-32, 58-32, and 16A(78)-32 and BOR1, BOR2, BOR3, FOR2, FOR5, FORK, FORU, and FORW seismic stations. These are from a GPS survey conducted by the Utah Geological Survey in Jun...
This is the updated Utah FORGE Phase 3B induced seismicity mitigation plan (ISMP) covering the general Utah FORGE area. This new version incorporates newly collected seismic data, including data collected during the 2022 stimulation and a probabilistic seismic hazard assessment (...
This is 2D and 3D seismic reflection data from Utah FORGE reprocessed during Phase 2c. The readme file containing an explanation of the data including data formats, software that can be used, processing, and projection and datum used. The Reprocessing document gives the rationale ...
This is a PDF file generated by Woolsey Land Surveying, P.C containing the surveyed locations, as located, in Latitude and Longitude degrees, of the Utah FORGE FSB4, FSB5, & FSB6 shallow seismic well locations.
This report summarizes the data quality from the Utah FORGE borehole passive seismic sensors (PSS) tools at well sites 58-32 and 78B-32. Two level Avalon tools were installed on 09-28-2022 and 09-29-2022 by representatives from Avalon, Schlumberger, University of Utah, and Instrum...
Preliminary monitoring and analyses for the Utah FORGE Milford Site.
Includes a report detailing the seismic monitoring goals and results, a detailed techno-economic infrastructure assessment with an analysis, a budget, schedules, and cost summaries, and a summary of environmental...
The report outlines the updated Traffic Light System (TLS) for the Utah FORGE project, which aims to mitigate seismic risks associated with Enhanced Geothermal Systems (EGS) operations. It integrates lessons from past operations, including stimulation and circulation experiments a...
This is a CSV spreadsheet containing UTM and Latitude and Longitude coordinates and elevations for Wells 78-32, 78B-32, 56-32, 58-32, 68-32, and 16A(78)-32 and seismic stations BOR1, BOR2, BOR3, FOR1, FOR2, FOR5, FOR6, FOR 7, FOR8, FORK, FORU, FORW, and FORB. These are from a GPS ...
This dataset contains a map, showing the Utah FORGE seismic stations, and seismic velocity model data. There are 61 1-D velocity models which are in a compressed TAR file. A paper is referenced at the end of this description which discusses the use of these data in 3D modelling. T...
This is a composite 3D seismic velocity that was constructed from compiled information from several local studies regarding seismic velocities and structural information. This seismic velocity model is provided in NonLinLoc format (slow_len), which is readily usable in NonLinLoc ...
This is a link to the website where Distributed Acoustic Sensing (DAS) seismic data, collected from wells 78-32 and 78B-32 during the Utah FORGE 2022 stimulation, is available for download. The data can be accessed at "Well 16A78-32 2022 Stimulation Seismicity Data" link in the su...
This is the final topical report for the Phase 2B Utah FORGE project, which is located near Roosevelt Hot Springs, Utah. This PDF format report details results associated with the conceptual geologic model, deep well 58-32, rock geomechanics, reservoir temperatures, seismic survey...
This dataset documents the FORGE 2024 stress-shadow seismic survey done in collaboration with the EarthScope Consortium. Original seismic waveform data are archived through EarthScope/NSF SAGE dataset 24-021. This GDR submission provides a link to the original EarthScope archive. ...
This is a link to downhole geophone data collected by Schlumberger. These data were collected in the Utah FORGE deep seismic monitoring wells 58-32 and 56-32. The format is a standard SEGY and the units are bits. To convert to acceleration (m/s2) multiply by 2.333 x 10-7. Use one ...
This is the current induced seismicity mitigation plan (ISMP) for the Utah FORGE project. Information that was collected during Phases 1 and 2 of the Utah FORGE project has been incorporated, as have literature searches and risk assessments. The purpose of this report is to identi...
This report describes the development of a preliminary 3D seismic velocity model at the Utah FORGE site and first results from estimating seismic resolution in the generated fracture volume during Stage 3 of the April 2022 stimulation.
A preliminary 3D velocity model for the larg...
This is a link to the Utah FORGE seismic data distribution site hosted by the University of Utah Seismograph Stations. The data was collected from downhole geophone strings in wells 56-32, 58-32 and 78B-32 during the 2022 stimulation of well 16A(78)-32. This dataset, which was upd...
This site contains information and data related to Utah earthquakes. It is maintained by the USGS Earthquake Hazards Program. This site contains information relevant to the Utah FORGE project.
This dataset contains seismic event catalogs from the hydraulic stimulation of wells 16A(78)-32 and 16B(78)-32 at the Utah FORGE site in April 2024. The data was collected by Geo Energy Suisse (GES) using a variety of seismic monitoring technologies, including 3-component (3C) geo...
This dataset contains distributed acoustic sensing (DAS) data collected during the April 2024 mini-circulation test at the Utah FORGE site. Data were acquired from wells 16B(78)-32 and 58-32 during the mini-circulation period from April 23-28, 2024, following stimulation of the in...
This archive contains a report on the Mineral Mountains West fault system as part of phase 2C and the evidence for the northern terminus of this structure. Geologic field mapping, reprocessing of 3D seismic reflection data, and soil gas surveys contributed to this effort.
Three shapefiles in this submission show the position of proposed seismic line surveys. The mid-crustal velocity anomaly file shows the extent of an anomalously low P-wave velocity zone in the subsurface. Two other files show the extent of known hydrothermal systems in the Rooseve...
Google Map