Search GDR Data

Showing results 1 - 25 of 94.
Show results per page.
Order by:
Available Now:
Technologies
Featured Projects
Topics
Data Type
"thermo-poro-mechanical effect"×

Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32

This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-...
Lu, G. et al University of Pittsburgh
Aug 30, 2024
2 Resources
0 Stars
Curated

Utah FORGE 5-2615: Determination and Analysis of Thermo-poromechanical Response of Fractured Rock 2024 Annual Workshop Presentation

This is a presentation on the Determination and Modeling-Informed Analysis of Thermo-poromechanical Response of Fractured Rock for Application to FORGE by the University of Oklahoma, presented by Ahmad Ghassemi. This video presentation discusses how to improve understanding and co...
Ghassemi, A. Energy and Geoscience Institute at the University of Utah
Sep 01, 2024
1 Resources
0 Stars
Curated

Utah FORGE 5-2615: Thermo-poromechanical Response of Fractured Rock Workshop Presentation

This is a presentation on the Experimental Determination and Modeling-Informed Analysis of Thermo-poromechanical Response of Fractured Rock for Application to Utah FORGE project by the University of Oklahoma, presented by Dr. Ahmad Ghassemi, McCasland Chair Prof. The project objec...
Ghassem, A. University of Oklahoma
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Geocellular model of St. Peter Sandstone for University of Illinois at Urbana-Champaign DDU Feasibility Study

The geocellular model of the St. Peter Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...
Damico, J. University of Illinois
Dec 31, 2018
5 Resources
0 Stars
Publicly accessible

Geocellular Model of Mt. Simon Sandstone for University of Illinois at Urbana-Champaign DDU feasibility study

The geocellular model of the Mt. Simon Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...
Damico, J. University of Illinois
Dec 31, 2018
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Laboratory Experiments Examining the Effect of Thermal and Mechanical Processes on Hydraulic Transmissivity Evolution

Using laboratory slide-hold-slide experiments, at temperatures from 22 to 200 degrees C, to examine effects of fracture reactivation and quasi-static loading on the evolution of fluid transport properties of simulated fractures in Westerly granite. At all temperatures, the in-plan...
Lockner, D. et al United States Geological Survey
Apr 03, 2023
2 Resources
0 Stars
Curated

Utah FORGE 3-2417: Fiber-Optic Geophysical Monitoring of Reservoir Evolution Workshop Presentation

This is a presentation on the Fiber-Optic Geophysical Monitoring of Reservoir Evolution at the Utah FORGE Milford Site project by Rice University, presented by Prof. Jonathan Ajo-Franklin. The project's objective was to develop an end-to-end fiber-optic sensing approach for EGS to...
Ajo-Franklin, J. et al Rice University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2557: Fluid and Temperature in Fracture Mechanics and Coupled THMC Processes Workshop Presentation

This is a presentation on the Role of Fluid and Temperature in Fracture Mechanics and Coupled Thermo-Hydro-Mechanical-Chemical (THMC) Processes for Enhanced Geothermal Systems project by Purdue University, presented by Distinguished Professor of Physics & Astronomy, Laura J. Pyrak...
Pyrak-Nolte, L. Purdue University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Chemical, Calcium Phosphate Cements for Geothermal Wells Corrosion Protection, Bond Strength and Matrix Self-Healing

The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and potential), bond and matrix strength, as well as matrix strength recovery after impos...
Sugama, T. Brookhaven National Laboratory
Sep 26, 2017
2 Resources
0 Stars
Publicly accessible

Thermal Drawdown-Induced Flow Channeling in a Single Fracture in EGS

The evolution of flow pattern along a single fracture and its effects on heat production is a fundamental problem in the assessments of engineered geothermal systems (EGS). The channelized flow pattern associated with ubiquitous heterogeneity in fracture aperture distribution caus...
Guo, B. et al Lawrence Livermore National Laboratory
Nov 15, 2015
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2557: Trixial Shear and Wellbore Breakout Tests Report and Data

Included are a report and data from triaxial shear tests on simulated Sierra White fault gouge and a borehole stimulation experiment. This serves as a progress report for the Role of Fluid and Temperature in Fracture Mechanics and Coupled Thermo-Hydro-Mechanical-Chemical (THMC) P...
Choens, C. and Yoon, H. Sandia National Laboratories
Apr 19, 2023
2 Resources
0 Stars
Publicly accessible

Silica Precipitation from Geothermal Brines: Effects of Iron Addition, Kinetics, Temperature, pH, and Brine Concentration

This document provides results of experiments aimed at removing silica from geothermal brines. All experiments were conducted with simulated brines. The data presented shows the effect of iron addition, kinetics, temperature, pH and brine concentration.
Renew, J. Southern Research Institute
Feb 06, 2016
1 Resources
0 Stars
Publicly accessible

Ground Source Heat Pump Parameter Survey

The purpose of this report is to investigate the effects of various parameters in a horizontal loop geothermal heat pump system. The obtained values include the temperature distribution over the entire system as well as the exiting temperature and bulk heat rate of the fluid. The ...
Gray, E. Wright State University
Jul 31, 2013
1 Resources
0 Stars
Publicly accessible

Lithium Sorption from Simulated Geothermal Brine: Impact of pH, Temperature, and Brine Chemistry

Lithium sorption information from experiments. Data includes the effects of pH, temperature and brine chemistry on the sorption of Lithium from a simulated geothermal brine. The sorbent used in the experiments is "hydrothermally produced, Spinel-LiMn2O4". The sorbent was produ...
Renew, J. Southern Research Institute
Feb 06, 2016
1 Resources
0 Stars
Publicly accessible

SMP Preparation, Programming, and Characterization

The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of the inherent challenges in geothermal environments, there are limitations in selecting proper lost circulation mate...
Salehi, S. et al University of Oklahoma
Oct 01, 2021
4 Resources
0 Stars
Curated

An HPC-Based Hydrothermal Finite Element Simulator for Modeling Underground Geothermal Behavior with Example Simulations on The Treasure Island and UC Berkeley Campus

This submission contains the source code of the Hydrothermal Finite Element Simulator used for the Treasure Island and UC Berkeley campus geothermal simulation. It contains a report that summarizes the development and validation of this Hydrothermal Finite Element Simulator, with ...
Chen, K. et al Lawrence Berkeley National Laboratory
Aug 01, 2021
5 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: DNA tracer data on transport through porous media

This submission contains DNA tracer data that supports the analysis and conclusions of the publication, "DNA tracer transport through porous media The effect of DNA length and adsorption." https://doi.org/10.1029/2020WR028382. This experiment used DNA as an artificial reservoir t...
Zhang, Y. et al Stanford University
Nov 21, 2020
3 Resources
0 Stars
Publicly accessible

Coupling Subsurface and Above-Surface Models for Optimizing the Design of Borefields and District Heating and Cooling Systems

Accurate dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange for seasonal energy storage. Current modeling approaches in building and district energy simulation tools typically consider heat conduct...
Hu, J. et al Lawrence Berkeley National Laboratory
Jan 31, 2022
10 Resources
0 Stars
Publicly accessible

Fallon FORGE: Thermal-Hydrological-Mechanical Models

Archive contains thermal-mechanical simulation input/output files. Included are files which fall into the following categories: ( 1 ) Spreadsheets with various input parameter calculations ( 2 ) Final Simulation Inputs ( 3 ) Native-State Thermal-Hydrological Model Input File Fol...
Blankenship, D. and Sonnenthal, E. Sandia National Laboratories
Mar 12, 2018
2 Resources
0 Stars
Publicly accessible

Machine Learning-Assisted High-Temperature Reservoir Thermal Energy Storage Optimization: Numerical Modeling and Machine Learning Input and Output Files

This data set includes the numerical modeling input files and output files used to synthesize data, and the reduced-order machine learning models trained from the synthesized data for reservoir thermal energy storage site identification. In this study, a machine-learning-assiste...
Jin, W. et al Idaho National Laboratory
Apr 15, 2022
4 Resources
0 Stars
Publicly accessible

Community Geothermal: Mechanical, Electrical, and Plumbing Design Report and Drawings Wallingford, CT

Included here are the mechanical, electrical, and plumbing design report and drawings for the proposed community geothermal system at an affordable housing complex in Wallingford, Connecticut. The report and drawings were developed by LN Consulting, in partnership with the Univers...
Donahue, I. Connecticut Department of Energy and Environmental Protection (CT DEEP)
Jul 31, 2024
2 Resources
0 Stars
Curated

Active Source Seismic (Ultrasonic) Data from Double-Direct Shear Lab Experiments

Active source ultrasonic data from lab experiments p5270 and p5271 including raw waveforms (WF) and mechanical data (mat). From the PSU team working on the "Machine Learning Approaches to Predicting Induced Seismicity and Imaging Geothermal Reservoir Properties" project. The fric...
Marone, C. Pennsylvania State University
May 05, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Core Analyses

This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF format, and spreadsheets containing tables from the reports as part of Utah FORGE Phase 2B. Please refer to the repor...
McLennan, J. Energy and Geoscience Institute at the University of Utah
May 30, 2018
1 Resources
0 Stars
Publicly accessible

Numerical Modeling for Hydraulic Fracture Prediction

Numerical modeling on fused silica cylindrical materials for predicting overpressures required to fracture an homogeneous pure (surrogate) material with known mechanical properties similar to igneous rock materials and later compare these values to experimental overpressures obtai...
Gupta, V. Pacific Northwest National Laboratory
Apr 26, 2016
1 Resources
0 Stars
Publicly accessible

GHPsRUS Project

The GHPsRUS Project's full name is "Measuring the Costs and Benefits of Nationwide Geothermal Heat Pump Deployment." The dataset contains employment and installation price data collected by four economic surveys: (1)GHPsRUS Project Manufacturer & OEM Survey, (2) GHPsRUS Project G...
Battocletti, L. Bob Lawrence and Associates, Inc.
Jul 09, 2013
1 Resources
0 Stars
Publicly accessible
1234Next >>