Search GDR Data

Utah FORGE: Direct Shear Test Data for Investigating Seismic Precursors to Shear Failure of Fractures

This dataset includes results of direct shear tests to investigate the mechanical and geophysical response of dry and saturated fractures in Indiana limestone and Sierra White granite. Direct shear tests were performed on tensile-induced fractures in Indiana limestone and Sierra W...

Han, K. et al Purdue University

Jun 11, 2024
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Leapfrog 3D Geologic Movie

This is a 3D geological movie of the Utah FORGE area created with Leapfrog Geothermal 3D modelling software. The movie shows the Utah FORGE site, wells, seismic and lithologic cross-sections, and rock unit tops. This illustrates the thick crystalline granitoid EGS reservoir.

Podgorney, R. Energy and Geoscience Institute at the University of Utah

May 18, 2018
1 Resources
0 Stars
Publicly accessible

EGS Collab: 3D Geophysical Model Around the Sanford Underground Research Facility

This package contains data associated with a proceedings paper (linked below) submitted to the 44th Workshop on Geothermal Reservoir Engineering. The Geophysical Model text file contains density, P and S-wave seismic speeds on a 3D grid. The file has six columns and provides latit...

Chai, C. et al Lawrence Berkeley National Laboratory

Feb 06, 2019
3 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Distributed Fiber Optic Acoustic Data (DAS)

Distributed fiber optic sensing was an important part of the monitoring system for EGS Collab Experiment #2. A single loop of custom fiber package was grouted into the four monitoring boreholes that bracketed the experiment volume. This fiber package contained two multi-mode fiber...

Rodriguez Tribaldos, V. and Hopp, C. Lawrence Berkeley National Laboratory

May 28, 2024
2 Resources
0 Stars
In curation

Development of a Downhole Tool Measuring Real-Time Concentration of Ionic Tracers and pH in Geothermal Reservoirs

For enhanced or Engineered Geothermal Systems (EGS) geothermal brine is pumped to the surface via the production wells, the heat extracted to turn a turbine to generate electricity, and the spent brine re-injected via injection wells back underground. If designed properly, the sub...

Hess, R. et al Sandia National Laboratories

Mar 31, 2014
1 Resources
0 Stars
Publicly accessible

Fiber Optic Thermal Slug Experiments Conducted at Texas Tech University Report

The report details a thermal circulation test at Red Raider #2 at the Oil Field Technology Center (OTC) involving staged hot water injections and distributed temperature sensing (DTS) fiber optic measurements. It includes experimental setup, fluid flow and temperature data, therm...

Leggett, S. Texas Tech University

Apr 11, 2025
1 Resources
0 Stars
Curated

Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The overall project area is 2500km2 with the Calibration Area (Dixie Valley Geothermal Wellfield) being about 170km2....

Iovenitti, J. AltaRock Energy Inc

Jan 02, 2014
11 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2428: Coupled Investigation of Fracture Permeability Impact on Reservoir Stress and Seismic Slip 2024 Annual Workshop Presentation

This is a presentation on the Coupled Investigation of Fracture Permeability Impact on Reservoir Stress and Seismic Slip Behavior by Lawrence Livermore National Laboratory, presented by Kayla Kroll. This presentation addresses testing and modelling related to the dependency of EG...

Kroll, K. et al Energy and Geoscience Institute at the University of Utah

Aug 27, 2024
1 Resources
0 Stars
Publicly accessible

Fallon FORGE: GIS and Downhole Well Lithology Data

ArcGIS Map Package with MT Station Locations, 2D Seismic Lines, Well data, Known Regional Hydrothermal Systems, Regional Historic Earthquake Seismicity, Regional Temperature Gradient Data, Regional Heat Flow Data, Regional Radiogenic Heat Production, Local Geology, Land Status, Cu...

Blankenship, D. Sandia National Laboratories

Dec 23, 2015
2 Resources
0 Stars
Publicly accessible

Utah FORGE: 2019 ARMA Overview Slide Presentation

This is an overview presentation of the Utah FORGE project given by Joseph Moore, Ph.D., at the 2019 American Rock Mechanics Associate meeting. It details the state of the Utah FORGE project at on 8/17/2019.

Moore, J. Energy and Geoscience Institute at the University of Utah

Aug 17, 2019
1 Resources
0 Stars
Publicly accessible

Bradys Geothermal Field MEQ Relocations 3D Velocity Models

Hypocenters of local microearthquakes and 3D P and S-velocity models computed by simultaneous inversion of arrival times recorded by the Brady seismic network Nov 2010-Mar 2015.

Foxall, W. University of Wisconsin

Jul 01, 2015
4 Resources
0 Stars
Publicly accessible

Preliminary Drill Sites

Preliminary locations for intermediate depth temperature gradient holes and/or resource confirmation wells based on compilation of geological, geophysical and geochemical data prior to carrying out the DOE-funded reflection seismic survey.

Lane, M. Oski Energy LLC

Jun 28, 2013
2 Resources
0 Stars
Publicly accessible

Washington Play Fairway Analysis Poly 3D Matlab Fault Modeling Scripts with Input Data to Create Permeability Potential Models

Matlab scripts and functions and data used to build Poly3D models and create permeability potential GIS layers for 1) Mount St. Helens seismic zone, 2) Wind River Valley, and 3) Mount Baker geothermal prospect areas located in Washington state.

Swyer, M. AltaRock Energy Inc

Feb 05, 2015
4 Resources
0 Stars
Publicly accessible

Temperature and Pressure Data Brady Monitoring Well SP-2

Static Pressure and Temperature Log for Brady monitor well SP-2. This data was taken from Well SP-2 which is part of the Brady Hot Springs Geothermal Site. The data contains pressure and temperature vs depth data for RIH (run in hole) Static conditions and POOH (pull out of hole) ...

Akerley, J. University of Wisconsin

Jan 01, 2015
2 Resources
0 Stars
Publicly accessible

Fallon FORGE: Vs30m Seismic Velocity

Time-averaged shear-wave velocity to 30 m depth about the Fallon, NV FORGE site.

Blankenship, D. and Kaven, J. Sandia National Laboratories

Mar 12, 2018
3 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: TOUGH2-CSM Simulation of Embedded Natural Fractures and Chemical Tracer Transport and Sorption

The EGS Collab SIGMA-V project is a multi-lab and university collaborative research project that is being undertaken at the Sanford Underground Research Facility (SURF) in South Dakota. The project consists of studying stimulation, fluid-flow, and heat transfer processes at a scal...

Johnston, B. et al National Renewable Energy Laboratory

Jun 07, 2019
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Magnetotelluric (MT) Data

New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...

Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah

Oct 01, 2020
5 Resources
0 Stars
Publicly accessible

Pressure-Temperature Simulation at Brady Hot Springs

These files contain the output of a model calculation to simulate the pressure and temperature of fluid at Brady Hot Springs, Nevada, USA. The calculation couples the hydrologic flow (Darcy's Law) with simple thermodynamics. The epoch of validity is 24 March 2015. Coordinates are ...

Feigl, K. Temple University

Jul 11, 2017
3 Resources
0 Stars
Publicly accessible

Steptoe Valley NV Data Compilation: Understanding a Stratigraphic Hydrothermal Resource through Geophysical Imaging

Sandia National Laboratories partnered with a multi-disciplinary group of subject matter experts to evaluate a stratigraphic geothermal resource in Steptoe Valley, Nevada using both established and novel geophysical imaging techniques. Provided here are a compilation of newly acqu...

Schwering, P. et al Sandia National Laboratories

Nov 01, 2023
8 Resources
0 Stars
Publicly accessible

Utah FORGE: Seismograph Station Information and Data

This link leads to the University of Utah Seismograph Stations website Utah FORGE seismograph stations page. This page contains a location map and description of the Utah FORGE seismograph stations and other related information. Additionally, data can be downloaded for each statio...

Pankow, K. University of Utah Seismograph Stations

Jan 26, 2021
1 Resources
0 Stars
Publicly accessible

Snake River Plain Play Fairway Analysis: Phase 2 Report and Phase 3 Proposal

This report presents the results of Phase 2 of the Snake River Plain Play Fairway Analysis project, and a summary of proposed work for Phase 3. Phase 2 focused on new data collection in specific areas of interest identified in Phase 1. These data include new magnetotelluric, seism...

Shervais, J. et al Utah State University

Sep 05, 2017
1 Resources
0 Stars
Publicly accessible

Simulations of Brady's-Type Fault Undergoing CO2 Push-Pull: Pressure-Transient and Sensitivity Analysis

Input and output files used for fault characterization through numerical simulation using iTOUGH2. The synthetic data for the push period are generated by running a forward simulation (input parameters are provided in iTOUGH2 Brady GF6 Input Parameters.txt [InvExt6i.txt]). In gene...

Jung, Y. and Doughty, C. Lawrence Berkeley National Laboratory

Mar 09, 2018
11 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Granite Core Thermal Properties Test Results Report (Oct. 2021)

This is a presentaiton from Metarock Laboratories on the thermal properties of Utah FORGE well 58-32 granite core. The presentation includes pictures of core samples, core details for the samples (sample depths and size), sample thermal expansion test results, and radial velocity ...

Laboratories, M. Energy and Geoscience Institute at the University of Utah

Oct 29, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Well 16B(78)-32 Fiber-Optic Cable Installation Report

This is an installation report detailing placement of the integrated fiber-optic cable behind casing in Utah FORGE well 16B(78)-32. These activities occurred in July of 2023 immediately after the drilling of 16B. This report was prepared by the FOGMORE R&D project (Fiber Optic MOn...

Ajo-Franklin, J. et al Rice University

May 15, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Report on Geodetic Observations of Fracture Development During April 2024 Stimulations

This report presents geodetic observations from the April 2024 stimulations at the Utah FORGE site, as part of LBNL FORGE Project 3-2535. It focuses on Distributed Strain Sensing (DSS) data from an optical fiber in well 16B, capturing localized strain linked to fracture propagatio...

Vasco, D. et al Lawrence Berkeley National Laboratory

Apr 28, 2025
1 Resources
0 Stars
Curated

<< Previous 4 5 6 7 8 9 10 11 12 13 Next >>