Search GDR Data

Showing results 26 - 44 of 44.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Technologies
Featured Projects
Topics
Data Type
"surface sensors"×
Utah FORGE×

Utah FORGE: Groundwater Levels Updated March 2022

This Excel spreadsheet contains Utah FORGE groundwater data for wells WOW2 and WOW3. The data was updated on March 16th, 2022 and contains legacy data. Groundwater data includes the level, offset, date, and time for each measurement. Temperature, drift, water elevation and other p...
Kirby, S. Utah Geological Survey
Mar 16, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32/Well16B(78)-32 Circulation Test Data

This dataset encompasses the collected data and associated reports from the low-rate injection circulation test conducted on wells 16A(78)-32 and 16B(78)-32 in July 2023 at Utah FORGE. It includes comprehensive raw circulation data, captured by Pason and Schlumberger (SLB). The da...
Mclennan, J. and Xing, P. Energy and Geoscience Institute at the University of Utah
Jul 19, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Wells Wow2 and Wow3 Groundwater Monitoring Data

This dataset includes ground water level data for Utah FORGE Phase 2c ground water monitoring wells Wow2 and Wow3. The readme file explains the fields contained in the included Excel spreadsheet and contains the coordinates for the wells. The Excel spreadsheet contains raw data ta...
Kirby, S. Energy and Geoscience Institute at the University of Utah
Jun 20, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Microgravity Data

A 4D microgravity survey began in early 2019 in order to benchmark surface and subsurface elevations prior to Phase 3 drilling and stimulation campaigns. Microgravity stations are collocated with GPS deformation benchmarks and use the same location survey data. Surveys are underta...
Hardwick, C. Utah Geological Survey
Oct 07, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Native State Model 2022 Update

This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. Thi...
Podgorney, R. and Liu, R. Idaho National Laboratory
Jul 29, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Area 0.5 m LiDAR Data

During the Fall of 2016 AGRC and the Utah Geological Survey acquired ~205 square miles of 8 points per meter Quality Level 1 LiDAR of The Frontier Observatory for Research in Geothermal Energy (FORGE) area around Milford, Utah in Beaver and Millard Counties in western Utah. The 0....
Allis, R. Energy and Geoscience Institute at the University of Utah
Oct 01, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 2023 Large Upscaled Discrete Fracture Network Models

This dataset includes the data and a report on the large upscaled discrete fracture network modeling done for the Utah FORGE project in 2023. The FORGE modeling team is making five discrete fracture network (DFN) realizations of a large reservoir model available to researchers. Th...
Finnila, A. Energy and Geoscience Institute at the University of Utah
Oct 02, 2023
17 Resources
0 Stars
Publicly accessible

Utah FORGE: InSAR Data from 2020

Interferometric Synthetic Aperture Radar data from the TerraSAR-X and the TanDEM-X satellite missions operated by the German Space Agency (DLR). Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software (see link in Resources). Data...
Batzli, S. and Feigl, K. University of Wisconsin
Dec 24, 2020
9 Resources
0 Stars
Publicly accessible

Utah FORGE: InSAR Data from 2021

Interferometric Synthetic Aperture Radar data from the TerraSAR-X and the TanDEM-X satellite missions operated by the German Space Agency (DLR). Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software (see link in Resources). Data...
Batzli, S. and Feigl, K. University of Wisconsin
Nov 30, 2021
9 Resources
0 Stars
Publicly accessible

Utah FORGE: InSAR Data from 2022

Interferometric Synthetic Aperture Radar data from the TerraSAR-X and the TanDEM-X satellite missions operated by the German Space Agency (DLR). Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software (see link in Resources). Data...
Batzli, S. and Feigl, K. University of Wisconsin
Nov 30, 2022
9 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results February 2025

This dataset contains results from nine triaxial direct shear tests conducted by Los Alamos National Laboratory on samples from FORGE Well 16A(78)-32. The primary objectives of this work were to determine the shear strength in both intact and residual states, evaluate dilation aga...
Frash, L. et al Los Alamos National Laboratory
Feb 28, 2025
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Seismic DAS and Geophone Borehole Data Processing and 3D Imaging of Vp/Vs Ratio in the 2024 Stimulated Reservoir

This dataset includes a final report and a 3D velocity model derived from seismic DAS and geophone borehole data collected during the April 2024 stimulation of the reservoir at Utah FORGE. The report details the processing of over 50,000 P and S-wave travel times used in a tomogra...
Gritto, R. and Jarpe, S. EMR Solutions and Technology
Mar 17, 2025
2 Resources
0 Stars
Awaiting release

Utah FORGE: Friction-Permeability-Seismicity Laboratory Experiments with Non-Linear Acoustics

Laboratory experimental data on saw-cut interface of Westerly Granite and Utah Forge granitoid rocks. Experiments include velocity-stepping and fluid pressure stepping experiments. Mechanical data from 3 ISCO pumps connected to a Temco pressure vessel measure axial, confining and ...
Eijsink, A. and Elsworth, D. Pennsylvania State University
Jul 08, 2022
2 Resources
0 Stars
Publicly accessible

Utah FORGE: GIS Well Temperature Data

This is a GIS point feature shapefile representing wells, and their temperatures, that are located in the general Utah FORGE area near Milford, Utah. There are also fields that represent interpolated temperature values at depths of 200 m, 1000 m, 2000 m, 3000 m, and 4000 m. in deg...
Gwynn, M. et al Energy and Geoscience Institute at the University of Utah
Feb 28, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Southwestern Utah Magnetotelluric (MT) Data

This comprehensive magnetotellurics (MT) dataset, which covers southwestern Utah, integrates 600 sites from various surveys, including those from the Utah FORGE, SubTER, and Play Fairway projects, all of which are linked below. The core of this dataset is the use of a 3D finite el...
Wannamaker, P. and Marris, V. Energy and Geoscience Institute at the University of Utah
Jan 22, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...
Alumbaugh, D. et al Lawrence Berkeley National Laboratory
Dec 01, 2022
5 Resources
0 Stars
Publicly accessible

Utah FORGE: 2024 Discrete Fracture Network Model Data

The Utah FORGE 2024 Discrete Fracture Network (DFN) Model dataset provides a set of files representing discrete fracture network modeling for the FORGE site near Milford, Utah. The dataset includes four distinct DFN model file sets, each corresponding to different time frames and ...
Finnila, A. and Jones, C. Energy and Geoscience Institute at the University of Utah
Sep 08, 2024
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Magnetotelluric (MT) Data

New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...
Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah
Oct 01, 2020
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Shear Reactivation Experimental Data for Fluid Injection-Rate Controls on Seismic Moment

Included are experimental data recorded from shear experiments that specifically explore the link between fluid-injection rate and seismic moment resulting from shear reactivation of laboratory faults. Raw mechanical data from three experiments are included alongside corresponding...
Roseboom, M. et al Pennsylvania State University
Nov 07, 2023
6 Resources
0 Stars
Publicly accessible
<< Previous12