Search GDR Data
Showing results 26 - 50 of 60.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
This report presents geodetic observations from the April 2024 stimulations at the Utah FORGE site, as part of LBNL FORGE Project 3-2535. It focuses on Distributed Strain Sensing (DSS) data from an optical fiber in well 16B, capturing localized strain linked to fracture propagatio...
This is a YouTube video containing the specifics of well planning for Utah FORGE 16B(78)-32. This well will be drilled as a doublet approximately 300 feet parallel to and above 16A(78)-32 and will be drilled between approximately April 15th and July 17th 2023.
This is an installation report detailing placement of the integrated fiber-optic cable behind casing in Utah FORGE well 16B(78)-32. These activities occurred in July of 2023 immediately after the drilling of 16B. This report was prepared by the FOGMORE R&D project (Fiber Optic MOn...
This report examines the fiber optic measurements made on the Utah FORGE well 16B(78)-32 after it and well 16A(78)-32 were hydraulically stimulated and shortly thereafter a 9 hour cross well circulation test was run between them. The report reviews distributed fiber optic signal p...
The report reviews results obtained by Neubrex using Distributed Acoustic Sensing (DAS) during the 16B(78)-32 hydraulic fracturing operations, Stages 1–4. It details DAS data acquisition, processing, and analysis, with a focus on acoustic noise signatures recorded during each st...
This dataset contains the final technical report and closeout presentation for the project Fiber Optic Geophysical Monitoring, conducted by Rice University as part of Utah FORGE project 3-2417. The report documents the deployment and analysis of fiber-optic based geophysical monit...
These reports contain information on the distributed temperature sensing (DTS), distributed strain sensing (DSS), and pressure monitoring during the stimulation of Well 16(B)78-32 at Utah FORGE, in April and May 2024. Reports include information on data collection and calibrations...
This dataset contains distributed acoustic sensing (DAS) microseismic event triggers (waveforms) recorded during the 16A-16B circulation tests conducted at the Utah FORGE site in July 2023 as part of the FOGMORE R&D project (Utah FORGE Project 3-2417). Data were acquired using Sil...
Includes data for measured inert tracer breakthrough curves first reported in Hawkins (2020) (Water Resources Research). In addition, this submission includes the production well temperature measurements first reported in Hawkins et al. (2017a) (Water Resources Research, volume 53...
This dataset features Distributed Acoustic Sensing (DAS) and fiber optics monitoring data acquired by Neubrex Energy Services during the Utah FORGE Well 16B(78)-32 circulation test in July 2023. DAS and fiber optic monitoring data include absolute strain, strain change, strain ch...
This preliminary data archive includes the relocated microseismic event catalog, 1D velocity model, and methods report from DAS acquisition conducted during the Well 16A and 16B circulation test (July 19th and 20th, 2023) at Utah FORGE. The methods report describes all processing ...
This report documents the post-hydraulic fracturing extended circulation test between Utah FORGE wells 16A and 16B conducted in August 2024. In well 16B, fiber optic measurements of Rayleigh frequency shift distributed strain sensing (RFS-DSS) and distributed temperature sensing ...
This dataset includes Rayleigh Frequency Shift (RFS) Distributed Strain Sensing (DSS) cumulative strain change and change rate data. The data was acquired during the stimulation of Utah FORGE Well 16A(78)-32 in April 2024 via fiber installed in Well 16B(78)-32. The fiber optic da...
This data archive includes the relocated microseismic event catalog from distributed acoustic sensing (DAS) acquisition conducted during the 16A-16B circulation tests that took place in July 2023. These results update the catalog presented in GDR 1613 (the preliminary catalog, lin...
This is the topical report that wraps up the work and results achieved during Utah FORGE Phase 2C. The zip file includes several folders containing (1) an overview; (2) the results; (3) the lessons learned; and (4) the conclusions. It also contains a folder containing appendices i...
This dataset contains distributed acoustic sensing (DAS) microseismic event triggers (raw waveforms) recorded during the 16A-16B stimulations conducted at the Utah FORGE site in April 2024. The dataset consists of raw waveform data provided in nanostrain rate units, accompanied by...
This dataset contains seismic event catalogs from the hydraulic stimulation of wells 16A(78)-32 and 16B(78)-32 at the Utah FORGE site in April 2024. The data was collected by Geo Energy Suisse (GES) using a variety of seismic monitoring technologies, including 3-component (3C) geo...
This dataset includes a final report and a 3D velocity model derived from seismic DAS and geophone borehole data collected during the April 2024 stimulation of the reservoir at Utah FORGE. The report details the processing of over 50,000 P and S-wave travel times used in a tomogra...
This dataset contains processed Neubrex Distributed Temperature Sensing data acquired in well 16B(78)-32 at the Utah FORGE site during August 2025 field operations. The data were collected during cross-well circulation testing from well 16A to well 16B and subsequent huff-and-puff...
This dataset contains microseismic data acquired during the Frisco pad flow test project led by Fervo Energy, conducted between August and September 2025 near the Utah FORGE geothermal site. The data were recorded using a Distributed Acoustic Sensing (DAS) fiber installed in well ...
This data archive includes the relocated microseismic event catalog and 3D velocity model from DAS acquisition conducted during the 16A stimulations that took place between April 3rd and April 7th, 2024. The catalog consists of multiple CSV files, each named after the associated s...
This dataset contains a catalog of moment tensors derived from distributed acoustic sensing (DAS) data acquired during stimulation of Utah FORGE Well 16A, conducted between April 3 and April 7, 2024. The data were generated as part of the FOGMORE (Fiber Optic MOnitoring for Reserv...
The solid Earth strains in response to the gravitational pull from the Moon, Sun, and other planetary bodies. Measuring the flexure of geologic material in response to these Earth tides provides information about the geomechanical properties of rock and sediment. Such measurements...
This dataset contains a map, showing the Utah FORGE seismic stations, and seismic velocity model data. There are 61 1-D velocity models which are in a compressed TAR file. A paper is referenced at the end of this description which discusses the use of these data in 3D modelling. T...
This dataset contains processed low-frequency Distributed Acoustic Sensing (LF-DAS) data collected between April 2 and April 12, 2024, during the Utah FORGE stimulation sequence involving wells 16A and 16B. The DAS measurements were acquired using a Silixa Carina interrogator unit...
Google Map