Search GDR Data
Showing results 26 - 50 of 54.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
Images of core samples collected from Utah FORGE well 16A(78)-32. These images were created by stitching together multiple photographs resulting in a circumferential view of the cores exterior in two dimensions. Core footages (measured depths) are indicated in the file names, and ...
This archive contains a geology map of the general Roosevelt Hot Springs region, both in PDF and ArcGIS geodatabase formats, that was created as part of the Utah FORGE project.
Geologic cross sections from the West Flank FORGE site. Cross Section traces linked in resources.
This is an x,y,z file of the West Flank FORGE 3D geologic model. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding algorithm.
The da...
Ground movement is evaluated through analysis of Interferometric Synthetic Aperture Radar (InSAR) interferograms. Results indicate there has been no detectable ground movement at millimeter scale. The zipped file in this submission contains a report, maps, and results from the InS...
This submission includes a shapefile of the Opal Mound Fault, and multiple datasets of lineaments mapped in the Mineral Mountains which overlook the Utah FORGE site, hyperlinked to rose diagrams in a polygon grid shapefile.
This is a summary report by Canamera Coring discussing the core drilling of Utah FORGE Well 16B(78)-32. This report includes detailed drilling graphics, images, and metrics from each coring run completed. About 240' of 4" core was taken from 4855' to 10493' in depth.
This is a link to the Automated Geographic Reference Center (AGRC) that houses GIS data for the state of Utah. This includes geoscience, cadastre, elevation and terrain, digital aerial photography, roads, aquifer data, etc. Several GIS datasets used in the Utah FORGE project origi...
Archive of ArcGIS data from the West Flank FORGE site located in Coso, California. Archive contains the following eight shapefiles:
Polygon of the 3D geologic model (WestFlank3DGeologicModelExtent)
Polylines of the traces 3D modeled faults (WestFlank3DModeledFaultTraces)
Polyline...
This submission contains x-ray diffraction data taken from 3,600 to 10,987 feet deep in well 16A(78)-32 in the Roosevelt Hot Springs Geothermal Area as part of the Utah FORGE project. 78 rock samples were taken. Samples are taken in a range of ten feet at 100 foot increments. Mine...
X-ray diffraction (XRD) results from cuttings samples collected during drilling of Utah FORGE well 16B(78)-32. The dataset includes XRD data for 77 samples taken between 3,120 and 10,977 feet measured depth (from the Kelly Bushing, 31 feet above ground level), with sampling interv...
ArcGIS Map Package with MT Station Locations, 2D Seismic Lines, Well data, Known Regional Hydrothermal Systems, Regional Historic Earthquake Seismicity, Regional Temperature Gradient Data, Regional Heat Flow Data, Regional Radiogenic Heat Production, Local Geology, Land Status, Cu...
This data bundle contains raw GPS data files and resulting data using Trimble Business Center and NOAA OPUS to process the GPS data in spreadsheets with station coordinates and elevations. A map of station locations is included along with the final processing report which includes...
This dataset contains an overview of the petrographic, X-ray Diffraction and scanning electron microscopy analyses of core samples from Utah FORGE Well 78B-32 and related data as described in the .zip folder's Description below.
This drilling data for Utah FORGE well 16B(78)-32 include a well survey, core summary, mud and mud temperature logs, daily reports of the drilling process, and additional data from the Pason oil and gas company. Well 16B(78)-32 serves as the production well for reservoir creation...
Master well database for all logs and other well data pertaining to the Fallon FORGE site.
Tables are formatted in NGDS Teir 3 schema where appropriate; redundancies between tables are omitted, and should be queried off of the main WellHeader table.
All relationships are set on th...
This dataset features petrographic, X-Ray Diffraction (XRD), and Scanning Electron Microscopy Analyses of core samples from well 16A(78)-32, which serves as the injection well for the Utah FORGE Enhanced Geothermal System (EGS) project. In addition to an overview of the analysis,...
Compilation of results for mechanical and fluid flow properties of analogue outcrop samples experimental data for compressional and shear wave velocities, tensile strengths, and compressive strengths. Outcrop location and sample orientation data are documented in a separate csv file.
This dataset includes an Excel file with the results of direct shear tests to investigate the mechanical and geophysical response of saturated joints. Tests were conducted on induced tension-fractured Sierra White granite joints in a custom water pressurized chamber. The preparati...
This dataset contains laboratory measurements of poroelastic properties of granite samples from Utah FORGE wells 58-32 and 78-32. The data include permeability, grain bulk modulus, drained bulk modulus, Skempton's pore pressure coefficient, and Biot's effective stress coefficient....
This submission contains a number of data files with vertices of meshed/interpolated surfaces used in the Phase 2B earth model. Examples include land surface (based on 10-meter DEM), the granitoid-basin fill contact, several faults, and also interpolated temperature isosurfaces f...
The data is associated to the Fallon FORGE project and includes LiDAR from the Navy GPO. Also included are geologic maps from the USGS and Nevada Bureau of Mines and Geology for the Fallon, NV area.
Well data for the USGS-142 well located in eastern Snake River Plain, Idaho. This data collection includes lithology reports, borehole logs, and photos of rhyolite core samples.
This collection of data has been assembled as part of the site characterization data used to develop ...
The site characterization data used to develop the conceptual geologic model for the Snake River Plain site in Idaho, as part of phase 1 of the Frontier Observatory for Research in Geothermal Energy (FORGE) initiative. This collection includes data on seismic events, groundwater,...
The 3D geologic model for the Fallon for site was constructed in EarthVision software using methods similar to (Moeck et al., 2009, 2010; Faulds et al., 2010b; Jolie et al., 2012, 2015; Hinz et al., 2013a; Siler and Faulds, 2013; Siler et al., 2016a, b) References are included in ...
Google Map