Search GDR Data
Showing results 51 - 75 of 93.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
This is the final technical report documenting laboratory experiments and modeling conducted to characterize the thermo-poromechanical behavior of fractured crystalline rocks for application to Utah FORGE. The report includes measurements of poroelastic and thermo-poroelastic prop...
Document describing the methodology used to determine the accelerometers' three-component orientations at the first EGS Collab testbed using Continuous Active-Source Seismic Monitoring (CASSM) data and hodogram analysis.
Original submission: gdr.openei.org/submissions/1166
This is a link to the open access, published dataset and modeling that supports a feasibility study of Reservoir Thermal Energy Storage (RTES) in the Portland Basin, Oregon, USA.
Citation:
Burns, E.R., 2020, SUTRA model used to evaluate Saline or Brackish Aquifers as Reservoirs f...
Compressibility values were obtained in a range of pressures at 250degC by employing a fixed volume view cell completely filled with PAA aqueous solution and injecting CO2 at constant flow rate (0.3mL/min). Pressure increase as a function of supercritical CO2 (scCO2) mass fraction...
This is a presentation on the Design and Implementation of a Novel Multi-Frac Stimulation Concept by The University of Oklahoma, presented by Ahmad Ghassemi. This slide presentation video discusses the design and implementation of a reservoir stimulation concept improving near-wel...
This paper documents our effort to use a fully coupled hydro-geomechanical numerical test bed to study using low hydraulic pressure to stimulate geothermal reservoirs with existing fracture network. In this low pressure stimulation strategy, fluid pressure is lower than the minimu...
This is the full wireline geophysical datasets for characterization of the EGS Collab Experiment #1 testbed on the 4850 level. A metadata file is included within the dataset explaining the logs, fracture picks, etc. Eight boreholes were drilled for this testbed and each one was lo...
This is a presentation on the Fracture Permeability Impact on Seismic Slip Behavior project by Lawrence Livermore National Laboratory, presented by Dr. Kayla A. Kroll. The project's objective is to develop, apply and validate a holistic thermal, hydrologic, mechanical, and chemic...
This dataset consists of a comprehensive report documenting the stimulation program conducted in May 2024 on Utah FORGE wells 16A(78)-32 and 16B(78)-32. It includes detailed accounts of operational and scientific objectives, stimulation methodologies, and testing outcomes. The rep...
Understanding the initiation and arrest of earthquakes is one of the long-standing challenges of seismology. Here we report on direct observations of borehole displacement by a meter-sized shear rupture induced by pressurization of metamorphic rock at 1.5 km depth. We observed the...
This report documents the use of fiber optic Rayleigh frequency shift (RFS) Distributed Strain Sensing (DSS), Distributed Temperature Sensing (DTS), and microseismic data recorded during the hydraulic fracture stimulation of well 16A(78)-32, as detected in the offset well 16B(78)-...
This file contains the first set of tracer data for the EGS Collab testbed. The first set of tracer tests were conducted during October-November, 2018. We have included tracer data for C-dots, chloride, fluorescein, and rhodamine-B. The details about the tracer test can be found i...
This is the full wireline geophysical datasets for characterization of the EGS Collab Experiment #2 testbed. A metadata fill is included within the dataset explaining the logs, fracture picks, etc. Eleven boreholes were drilled for this testbed and each one was logged with north s...
This report describes minifrac tests conducted in the 16B(78)-32 well at the Utah FORGE site to characterize subsurface stresses, including the magnitude and orientation of the minimum and maximum horizontal stresses and the magnitude of the vertical stress. A minifrac test was co...
These core photos and descriptions were taken from the five boreholes that were drilled as part of the kISMET SubTER project conducted at the Sanford Underground Research Facility (SURF) in Lead, SD. The boreholes are subvertical in orientation, and were drilled on the 4850 level ...
The U.S. Department of Energy's (U.S. DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is a field laboratory that provides a unique opportunity to develop and test new technologies for characterizing, creating and sustaining Enhanced Geothermal Systems (EGS) in ...
The EGS Collab experiment 2 was focused on testing shear stimulation techniques. Shear stimulation, in this case, means using hydraulic pressure to cause shear slip on preexisting fracture or fault planes such that the hydraulic conductivity of the fracture or fault increases. The...
This archive provides a a link to a microseismic event catalog of the 2024 stimulations at Utah FORGE. The catalog was derived from data collected with the surface monitoring network consisting of 5 permanent seismic stations deployed by the University of Utah Seismograph Station...
This dataset includes Rayleigh Frequency Shift (RFS) Distributed Strain Sensing (DSS) cumulative strain change and change rate data. The data was acquired during the stimulation of Utah FORGE Well 16A(78)-32 in April 2024 via fiber installed in Well 16B(78)-32. The fiber optic da...
This is a presentation and materials on the Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency at the Utah FORGE Site project by The University of Texas at Austin, presented by Professor Mukul M. Sharma. The project's objectives w...
This a report for the project "Mapping Fracture Network Creation with Microseismicity During EGS Demonstrations". Effective enhanced geothermal systems (EGS) require optimal fracture networks for efficient heat transfer between hot rock and fluid. Microseismic mapping is a key too...
The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 1...
This submittal includes the field-test data collected during stress tests conducted in the Utah FORGE 16B(78)-32 wellbore to measure/characterize the stresses in the geothermal reservoir. The type of stress test performed is referred to as a mini-frac test or a micro-frac test. Th...
This catalog contains microseismic event locations recorded during the April 2024 stimulation at the Utah FORGE site. Events were detected and located using a phase-picking workflow that integrates downhole geophones (wells 56 and 78B) and downhole DAS (well 16B). P and S-wave arr...
Stimulation data from Experiment 1 of EGS Collab, which occurred on the 4850 ft level of the Sanford Underground Research Facility (SURF). A detailed description of the stimulation data is provided in the StimulationDataNotes.docx and is also available on the EGS Collab Wiki. A M...
Google Map