Search GDR Data

Newberry EGS Demonstration: Initial Project Report and Induced Seismicity Mitigation Plan, 2011

This is the first project report and induced seismicity mitigation plan for the Newberry Enhanced Geothermal Systems (EGS) Demonstration project. The primary objectives of this first phase were to obtain necessary permits and comply with all regulations, including NEPA, communica...

Cladouhos, T. et al AltaRock Energy Inc

May 05, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results February 2025

This dataset contains results from nine triaxial direct shear tests conducted by Los Alamos National Laboratory on samples from FORGE Well 16A(78)-32. The primary objectives of this work were to determine the shear strength in both intact and residual states, evaluate dilation aga...

Frash, L. et al Los Alamos National Laboratory

Feb 28, 2025
1 Resources
0 Stars
Publicly accessible

Microhole drilling technology utilizing a golden section search algorithm

A fundamental issue in microhole drilling is that delivering high weight-on-bit (WOB), high torque rotational horsepower to a conventional drill bit does not scale down to the hole sizes necessary to realize the envisioned cost savings An optimization algorithm called a golden sec...

Su, J. et al Sandia National Laboratories

Jun 23, 2021
7 Resources
0 Stars
Publicly accessible

Testing for Controlled Rapid Pressurization

Borehole W1 is a NQ core hole drilled at our test site in Socorro. The rock is rhyolite. Borehole W1 which was used to test gas-gas explosive mixtures is 55 feet deep with casing (pinkish in the drawing) set to 35 feet. The model is a representation of the borehole and the hol...

Knudsen, S. Sandia National Laboratories

Sep 03, 2014
1 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Large-scale Test Setup

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This large-scale set-up report is about the system that has been constructed to...

Teodoriu, C. et al Welltec

Jan 31, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: DAS Microseismic Event Catalog from the 16A/16B Circulation Test, 2023

This preliminary data archive includes the relocated microseismic event catalog, 1D velocity model, and methods report from DAS acquisition conducted during the Well 16A and 16B circulation test (July 19th and 20th, 2023) at Utah FORGE. The methods report describes all processing ...

Vera Rodriguez, I. et al Rice University

Jun 12, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Direct Shear Test Data for Investigating Seismic Precursors to Shear Failure of Fractures

This dataset includes results of direct shear tests to investigate the mechanical and geophysical response of dry and saturated fractures in Indiana limestone and Sierra White granite. Direct shear tests were performed on tensile-induced fractures in Indiana limestone and Sierra W...

Han, K. et al Purdue University

Jun 11, 2024
2 Resources
0 Stars
Publicly accessible

Shear Induced Permeability Test: Brady and Desert Peak Core X-Ray CT Files

As part of the shear induced permeability test, the rock cores were also scanned with X-ray Computed Tomography (CT) before and after sustainability tests using a modified GE Lightspeed 16 medical CT scanner. The CT provides another perspective on the fracture and aperture, as wel...

Kneafsey, T. et al Lawrence Berkeley National Laboratory

Sep 26, 2016
4 Resources
0 Stars
Publicly accessible

Matlab Scripts and Sample Data Associated with Water Resources Research Article

Scripts and data acquired at the Mirror Lake Research Site, cited by the article submitted to Water Resources Research: Distributed Acoustic Sensing (DAS) as a Distributed Hydraulic Sensor in Fractured Bedrock M. W. Becker(1), T. I. Coleman(2), and C. C. Ciervo(1) 1 California St...

Becker, M. and Coleman, T. California State University

Jul 18, 2015
2 Resources
0 Stars
Publicly accessible

Auto Indexer Auto-Indexer for Percussive Hammers: Vane Motor Dynamometer Testing

Objectives Options associated with geothermal drilling operations are generally limited by factors such as formation temperature and rock strength. The objective of the research is to expand the "tool box" available to the geothermal driller by furthering the development of a hig...

Su, J. Sandia National Laboratories

Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

WISE-CASING: Time Domain Reflectometry Data from Cymric Field, CA

The objective of this field test is to validate several technologies for non-invasive well integrity assessment using existing wells with a known completion. The tests were made at the Cymric oil field, which is a steam flood operation. The wells therefore undergo similar downhole...

Wang, J. Lawrence Berkeley National Laboratory

Feb 21, 2019
5 Resources
0 Stars
Publicly accessible

Data of High-Temperature Dynamic LCM Testing Setup

Data from high temperature dynamic sealing tests for various fracture widths, at various temperatures (degrees F), with 5 wt.% bentonite-based mud containing various material fiber contents, at 100 to 400 psi differential pressure. Data from pressure test and evaluation of the dy...

Magzoub, M. et al University of Oklahoma

May 31, 2021
11 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Hydraulic Pressure Test Results

The EGS Collab experiment 2 was focused on testing shear stimulation techniques. Shear stimulation, in this case, means using hydraulic pressure to cause shear slip on preexisting fracture or fault planes such that the hydraulic conductivity of the fracture or fault increases. The...

Burghardt, J. et al Lawrence Berkeley National Laboratory

Feb 17, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Report on Minifrac Tests for Stress Characterization

This report describes minifrac tests conducted in the 16B(78)-32 well at the Utah FORGE site to characterize subsurface stresses, including the magnitude and orientation of the minimum and maximum horizontal stresses and the magnitude of the vertical stress. A minifrac test was co...

Kelley, M. et al Battelle Memorial Institute

Feb 22, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32: Summary of Drilling Activities

This is a 74 page detailed summary of the drilling activities of Utah FORGE 16A(78)-32, a highly deviated well completed on February 2nd, 2021, as part of the Utah FORGE project. This well was deviated at 65 degrees from vertical after reaching 6000 feet in depth had a total measu...

Winkler, D. et al Energy and Geoscience Institute at the University of Utah

Mar 20, 2021
1 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Pipe Preparation Report

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This pipe preparation report is based on the test pipe that was procured and pr...

Teodoriu, C. et al Welltec

Mar 31, 2023
2 Resources
0 Stars
Publicly accessible

Map of Validation of Innovative Exploration Technologies for Newberry Volcano

A map showing location of wells permitted, drilled and seismic test, as part of validation of innovative exploration technologies done for the Newberry Volcano project in 2012.

Jaffe, T. Davenport Newberry Holdings, LLC

Jul 01, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 58-32 Injection and Packer Performance, April and May 2019

This is a PDF format summary report regarding the performance of a packer, which failed, and bridge plug used during the injection program in Utah FORGE deep Well 58-32, April and May, 2019.

McLennan, J. and Podgorney, R. Energy and Geoscience Institute at the University of Utah

Mar 22, 2020
1 Resources
0 Stars
Publicly accessible

Community Geothermal: Borefield Design, Thermal Conductivity, and Subsurface Modeling Data Chicago, IL

This dataset encompasses the development of a geothermal energy system for the West Woodlawn neighborhood in Chicago, Illinois. This project is part of a broader initiative to design and deploy geothermal heating and cooling systems at a community scale. The dataset includes therm...

Baser, T. et al Saint Louis University

Dec 04, 2023
6 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: DNA tracer data on transport through porous media

This submission contains DNA tracer data that supports the analysis and conclusions of the publication, "DNA tracer transport through porous media The effect of DNA length and adsorption." https://doi.org/10.1029/2020WR028382. This experiment used DNA as an artificial reservoir t...

Zhang, Y. et al Stanford University

Nov 21, 2020
3 Resources
0 Stars
Publicly accessible

Wister, CA Downhole and Seismic Data

This submission contains Downhole geophysical logs associated with Wister, CA Wells 12-27 and 85-20. The logs include Spontaneous Potential (SP), HILT Caliper (HCAL), Gamma Ray (GR), Array Induction (AIT), and Neutron Porosity (NPOR) data. Also included are a well log, Injection T...

Akerley, J. Ormat Nevada Inc

Dec 18, 2010
16 Resources
0 Stars
Publicly accessible

Utah FORGE: Neubrex Well 16B(78)-32 Stimulation and Circulation Fiber Optics Reports Summer, 2024

This zip file contains reports discussing the use of fiber optics during well 16B(78)-32 stimulation and circulation tests in the summer of 2024. The reports cover the collection of strain rate and temperature change data during these well events. Theory, methods, and initial dat...

Jurick, D. et al Neubrex Energy Services (US), LLC

Sep 25, 2024
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Shear Stimulation ERT Monitoring Data

This repository contains the electrical resistivity tomography (ERT) monitoring data that was collected before, during, and after shear stimulation attempts were conducted at EGS Collab. These tests were carried out on the SURF 4100 level during Experiment 2 in March, 2022. Flow a...

Johnson, T. Pacific Northwest National Laboratory

Mar 06, 2023
4 Resources
0 Stars
Publicly accessible

Snake River (Idaho) Geothermal Drilling Project: Innovative Approaches to Geothermal Exploration

The goal of our project was to test innovative exploration technologies using existing and new data, and to ground-truth these technologies using slim-hole core technology. The slim-hole core allowed us to understand subsurface stratigraphy and alteration in detail, and to correla...

Shervais, J. et al Utah State University

Feb 21, 2014
1 Resources
1 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results

This submission contains a report and associated data from triaxial direct shear tests conducted by Los Alamos National Laboratory. The samples used were sourced from 16A(78)-32 well core. The primary objectives of this test were to determine the shear strength in both intact an...