Search GDR Data

Newberry EGS Seismic Velocity Model

We use ambient noise correlation (ANC) to create a detailed image of the subsurface seismic velocity at the Newberry EGS site down to 5 km. We collected continuous data for the 22 stations in the Newberry network, together with 12 additional stations from the nearby CC, UO and UW ...

Templeton, D. Lawrence Livermore National Laboratory

Oct 01, 2013
1 Resources
0 Stars
Publicly accessible

Community Geothermal: Seward Alaska Heat Loop District Energy System Modelica Model

This dataset contains a Modelica-based dynamic thermal simulation model of the Seward Heat Loop project. The model contains building loads generated from DesignBuilder simulations of the four city-owned buildings that are connected to the system. These buildings are heated by a hy...

Mitchell, M. et al National Renewable Energy Laboratory

Sep 29, 2024
1 Resources
0 Stars
In progress

Extraction/Injection Well Design for Deep Direct Use at University of Illinois at Urban-Champaign

The large scale Deep Direct Use (DDU) geothermal project in the low temperature environment of the Illinois Basin requires drilling and completing two wells. One well would be the extraction (producing) well and would be built to deliver a flow rate of approximately 6000 barrels ...

Kirksey, J. and Lu, Y. University of Illinois

Mar 31, 2019
1 Resources
0 Stars
Publicly accessible

Seismic Analysis of Spatio-Temporal Fracture Generation During EGS Resource Development Deviatoric MT, Fracture Network, and Final Report

This submission contains 167 deviatoric moment tensor (MT) solutions for the seismicity observed two years prior and three years post start of injection activities at The Geysers Prati 32 EGS Demonstration. Also included is a statistical representation of the properties of 751 fra...

Gritto, R. et al Array Information Technology

Sep 01, 2018
3 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: 4850L Downhole Camera Surveys During Injection

This package includes data and footage from two rounds of downhole camera surveys performed at the Sanford Underground Research Facility (SURF) on the 4850 level. The exercise was performed once on 25 May 2018 and once on 21 December 2018. On May 25th, the first round was done dur...

Schwering, P. et al Sandia National Laboratories

May 25, 2018
9 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Second Set Tracer Test Results

The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments. The first multi-well experimental site was established at the 4850 level in the Homestake Mine in Lead,...

Neupane, G. et al Idaho National Laboratory

Dec 19, 2019
4 Resources
0 Stars
Publicly accessible

Utah FORGE 1-2409: Zonal Isolation Solution for Geothermal Wells Workshop Presentation

This is a presentation on the Zonal Isolation Solution for Geothermal Wells project by PetroQuip Energy Services, presented by VP of operations Robert Coon. The project's objective was to design and develop a multi-stage system for zonally isolating fluids inside and outside of g...

Coon, R. et al PetroQuip Energy Services

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Seismic Analysis of Spatio-Temporal Fracture Generation During EGS Resource Development Full Moment Tensors and Stress Inversion Catalogs

This submission contains 167 full moment tensor (MT) solutions for the seismicity observed two years prior and three years post start of injection activities. Also included are the azimuth and plunge angles for the three main stress directions sigma1, sigma 2 and sigma 3 at the P...

Gritto, R. et al Array Information Technology

Sep 26, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 14-2 Logs and Data from Roosevelt Hot Spring Area

This is a compilation of logs and data from Well 14-2 in the Roosevelt Hot Springs area in Utah. This well is also in the Utah FORGE study area. Data includes: flowmeter survey (1989), geochemistry (1977-1978, 1977-1983), injection test data (1979, 1982), and spinner surveys (19...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 03, 2016
1 Resources
0 Stars
Publicly accessible

Fallon, NV FORGE well 21-31 Lithology, Mineral, Image Log, and Injection Test data

Attached is 5 datasets collected from Fallon FORGE well 21-31 located in Churchill County, Nevada collected and interpreted between Feburary 2018-January 2020. This submission includes 1) new lithology interpretation derived from petrographic thin sections of sidewall cores taken ...

Kraal, K. and Ayling, B. Sandia National Laboratories

May 30, 2020
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Fluid Injection Induced Shearing Experiments on Fractured Granitoid at Elevated Temperatures

This repository contains experimental data from a series of fluid injection-induced shearing tests conducted on Utah FORGE granitoid. The experiments were performed using an aluminum triaxial pressure vessel (TEMCO) apparatus at Pennsylvania State University. The primary aim was t...

Elsworth, D. et al Pennsylvania State University

Aug 12, 2024
16 Resources
0 Stars
Curated

Play Fairway Analysis CA-NV-OR: Additional 2km Grid Figures

Various data sets displayed on a 2km grid for the Play Fairway Analysis CA-NV-OR area. Grids at 2km, updated from 5km.

Ferguson, C. University of California

Aug 05, 2015
7 Resources
0 Stars
Publicly accessible

EGS Collab: Hydraulic Fracturing Test Measurements on the 4100L of SURF

This package includes data from two days of testing at the Sanford Underground Research Facility (SURF) on the 4100 level. The tests were performed in borehole TV4100 in the battery charging alcove south of the Yates shaft. TV4100 is a vertical borehole ~50 meters deep. A series o...

Ingraham, M. et al Sandia National Laboratories

Aug 15, 2019
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All expe...

Yu, J. et al Pennsylvania State University

Jul 01, 2023
27 Resources
0 Stars
Curated

Subsurface Characterization and Machine Learning Predictions at Brady Hot Springs

Subsurface data analysis, reservoir modeling, and machine learning (ML) techniques have been applied to the Brady Hot Springs (BHS) geothermal field in Nevada, USA to further characterize the subsurface and assist with optimizing reservoir management. Hundreds of reservoir simulat...

Beckers, K. et al National Renewable Energy Laboratory

Feb 18, 2021
1 Resources
0 Stars
Publicly accessible

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling

Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, fo...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 22, 2021
14 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: In-situ observation of pre-, co and post-seismic shear slip preceding hydraulic fracturing

Understanding the initiation and arrest of earthquakes is one of the long-standing challenges of seismology. Here we report on direct observations of borehole displacement by a meter-sized shear rupture induced by pressurization of metamorphic rock at 1.5 km depth. We observed the...

Guglielmi, Y. et al Lawrence Berkeley National Laboratory

May 22, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Planned Trajectory

This submission includes an Excel spreadsheet containing the Utah FORGE deep well 16A(78)-32 planned trajectory including UTM coordinates, elevations, and depths from the well head to the toe. This proposed new injection well is expected to descend vertically to a depth of approxi...

Podgorney, R. and Nash, G. Idaho National Laboratory

Mar 24, 2020
1 Resources
0 Stars
Publicly accessible

WHOLESCALE: Mass Flux Rates for Wells at San Emidio in December 2016

This dataset provides mass flux rates in kg/s from six (production and injection) wells at San Emidio at minute intervals from December 1, 2016 December 15, 2016. Files for injection wells are named with "IW", for instance "WellIW42-21SI.csv", and include negative flux rates. Fil...

Cardiff, M. et al University of Wisconsin Madison

Dec 01, 2016
2 Resources
0 Stars
Curated

G-Function Library for Modeling Vertical Bore Ground Heat Exchanger

This library contains g-functions (thermal response functions) for standard, regularly spaced vertical borehole ground heat exchangers. In total, it contains 34, 321 configurations. To permit interpolation, each configuration has g-functions for heights of 24, 48, 96, 192, and 384...

Spitler, J. et al Oak Ridge National Laboratory

Jun 30, 2021
10 Resources
0 Stars
Publicly accessible

Life Cycle Water Consumption and Water Resource Assessment for Utility-Scale Geothermal Systems: An In-Depth Analysis of Historical and Forthcoming EGS Projects

This report is the third in a series of reports sponsored by the U.S. Department of Energy Geothermal Technologies Program in which a range of water-related issues surrounding geothermal power production are evaluated. The first report made an initial attempt at quantifying the li...

Schroeder, J. et al Argonne National Laboratory

Aug 31, 2013
11 Resources
0 Stars
Publicly accessible

Fallon FORGE: Seismic Reflection Profiles

Newly reprocessed Naval Air Station Fallon (1994) seismic lines: pre-stack depth migrations, with interpretations to support the Fallon FORGE (Phase 2B) 3D Geologic model. Data along seven profiles (>100 km of total profile length) through and adjacent to the Fallon site were re-...

Blankenship, D. et al Sandia National Laboratories

Feb 01, 2018
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 2C Topical Report

This is the topical report that wraps up the work and results achieved during Utah FORGE Phase 2C. The zip file includes several folders containing (1) an overview; (2) the results; (3) the lessons learned; and (4) the conclusions. It also contains a folder containing appendices i...

Moore, J. et al Energy and Geoscience Institute at the University of Utah

Dec 11, 2019
2 Resources
0 Stars
Publicly accessible

Oilwell Conversion (Well API 121913310501) to Geothermal Heat Storage Well for Flexible Electricity Storage

Geothermal growth is limited by a lack of geographically dispersed high-temperature thermal resources and high initial upfront investment in characterization and well construction. This project intended to address the challenges of energy supply intermittency and enhance grid resi...

Malkewicz, N. et al University of Illinois

May 05, 2021
8 Resources
0 Stars
Publicly accessible

Alternative CAES Technology Using Depleted Unconventional Gas Wells and Subsurface Thermal Energy Storage (GeoCAES)

This project assessed the technical viability of a process called GeoCAES. The process stores electrical energy by injecting natural gas into shale gas formations using a compressor, storing it, and producing it through an expander to generate electricity. This data submission inc...

Johnston, H. and Young, D. National Renewable Energy Laboratory

May 23, 2019
8 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 Next >>