Search GDR Data

Utah FORGE 3-2535: Preliminary Report on Development of a Reservoir Seismic Velocity Model

This report describes the development of a preliminary 3D seismic velocity model at the Utah FORGE site and first results from estimating seismic resolution in the generated fracture volume during Stage 3 of the April 2022 stimulation. A preliminary 3D velocity model for the larg...

Gritto, R. Array Information Technology

Jan 30, 2023
1 Resources
0 Stars
Curated

Utah FORGE 3-2535: Joint Imaging of Fracture Growth and Estimation of Fracture Properties During EGS Development 2024 Annual Workshop Presentation

This is a presentation on the Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development by Lawrence Berkeley National Laboratory, presented by David Alumbaugh. This is a video pres...

Alumbaugh, D. Energy and Geoscience Institute at the University of Utah

Aug 25, 2024
1 Resources
0 Stars
Curated

Utah FORGE: Orientation of Borehole and Surface Seismic Stations

The University of Utah Seismograph Stations (UUSS) are responsible for the seismic monitoring of the experiments and have installed a series of permanent surface and borehole seismic instruments around the Utah FORGE project site. This report discusses the methods used for proper ...

Bradshaw, P. et al University of Utah Seismograph Stations

Jun 21, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Roosevelt Hot Springs Analytical Well-Based Temperature Model Data

This submission contains a cumulative record of one-dimensional temperature modeling based off of well data in the vicinity of the Utah FORGE site. Temperature log data from wells used, and in some cases were extrapolated below the bottom of a number of wells. The data were corre...

Podgorney, R. and Allis, R. Idaho National Laboratory

Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Curated

Utah FORGE: Seismograph Station Information and Data

This link leads to the University of Utah Seismograph Stations website Utah FORGE seismograph stations page. This page contains a location map and description of the Utah FORGE seismograph stations and other related information. Additionally, data can be downloaded for each statio...

Pankow, K. University of Utah Seismograph Stations

Jan 26, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Temperature Contours at 200 m

The individual shapefiles in this dataset delineate estimated temperature contours (20, 40, 60, and 80 deg C) at a depth of 200 m in the Milford, Utah FORGE area. Contours were derived from 86 geothermal, gradient, and other wells drilled in the area since the mid-1970s with dept...

Moore, J. Energy and Geoscience Institute at the University of Utah

Feb 01, 2016
7 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Compilation of Geodetic Data and Estimation of Associated Deformation

Report on possible geodetic signature of the 3 stimulations in April 2022 as well as a comparison with existing InSAR data gathered over the site before, during, and after the stimulation. In geothermal production it is important to understand the existing stress field and the cha...

Vasco, D. et al Lawrence Berkeley National Laboratory

Apr 29, 2022
4 Resources
0 Stars
Curated

Utah FORGE: Report on the Thermal Properties of Wells 16A(78)-32 & 58-32 Granite

This is a report from Metarock Laboratories on the thermal properties of Utah FORGE wells 16A(78)-32 & 58-32 granite. The report includes pictures of core samples, core details for the samples (where the sample was taken and the size of the sample), sample thermal expansion test r...

Laboratories, M. et al Energy and Geoscience Institute at the University of Utah

May 04, 2021
1 Resources
0 Stars
Curated

Utah FORGE 7-3639: Design and Implementation of a Novel Multi-Frac Stimulation Concept 2024 Annual Workshop Presentation

This is a presentation on the Design and Implementation of a Novel Multi-Frac Stimulation Concept by The University of Oklahoma, presented by Ahmad Ghassemi. This slide presentation video discusses the design and implementation of a reservoir stimulation concept improving near-wel...

Ghassemi, A. and Jeffery, R. Energy and Geoscience Institute at the University of Utah

Sep 02, 2024
1 Resources
0 Stars
Curated

Utah FORGE: 3D Gravity Data

These resources describe the 3D geophysical inversion modeling of gravity data at the FORGE site near Milford, Utah. FORGE is the Frontier Observatory for Research in Geothermal Energy and the site in Utah has been selected by the U.S. Dept. of Energy for a 5-year R&D program to t...

Hardwick, C. and Witter, J. Energy and Geoscience Institute at the University of Utah

Jun 24, 2019
2 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Machine Learning for Well 16A(78)-32 Stress Predictions

This report reviews the training of machine learning algorithms to laboratory triaxial ultrasonic velocity data for Utah FORGE Well 16A(78)-32. Three machine learning (ML) predictive models were developed for the prediction of vertical and two orthogonally oriented horizontal str...

Kelley, M. et al Battelle Memorial Institute

Jun 19, 2023
1 Resources
0 Stars
Curated

Utah FORGE: 2023 Phase 3B Year 1 Annual Report

This report discusses the objectives, goals, accomplishments and results of Phase 3B Year 1 of the Utah FORGE project. The report includes infrastructure, seismic monitoring, modelling, external R&D, communications and outreach, data produced, lessons learned, conclusions, and pla...

Moore, J. et al Energy and Geoscience Institute at the University of Utah

Aug 09, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Fiber-Optic Geophysical Monitoring of Reservoir Evolution Workshop Presentation

This is a presentation on the Fiber-Optic Geophysical Monitoring of Reservoir Evolution at the Utah FORGE Milford Site project by Rice University, presented by Prof. Jonathan Ajo-Franklin. The project's objective was to develop an end-to-end fiber-optic sensing approach for EGS to...

Ajo-Franklin, J. et al Rice University

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Magnetotelluric (MT) Data

New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...

Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah

Oct 01, 2020
5 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2565: Hydrothermal Evolution of Fracture Properties Workshop Presentation

This is a presentation on the Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions project by the U.S. Geological Survey, presented by Dr. David Lockner. The project's objective was to determine how thermal, hydraulic, mechanical, and ch...

Lockner, D. et al United States Geological Survey

Sep 08, 2023
1 Resources
0 Stars
Curated

Utah FORGE: Reports on Northwestern Nevada Well Doublet Drilling and Testing by Fervo Energy

These reports review Fervo Energy's construction of a commercial enhanced geothermal system (EGS). Fervo has qualified full functionality of the system through production testing at commercially relevant operating conditions. The project site is located in a nearfield setting ad...

Dadi, S. et al Fervo Energy

Sep 05, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE: 2024 Annual Report on Activities and Advancements

This 2024 annual report for Phase 3B Year 2 at Utah FORGE provides an in-depth account of activities and advancements made at the site. Key achievements include drilling and stimulating the production well 16B(78)-32, creating a geothermal reservoir, and achieving commercial-scale...

McLennan, J. et al Energy and Geoscience Institute at the University of Utah

Jan 27, 2025
1 Resources
0 Stars
Curated

Utah FORGE 1-2410: Development of a Smart Completion and Stimulation Solution 2024 Annual Workshop Presentation

This is a presentation on the Development of a Smart Completion & Stimulation Solution by Welltec, presented by Ricardo Vasques. This video slide presentation discusses the development of an (1) annular isolation system, (2) a stimulation isolation system, and (3) a multi open-cl...

Esquitin, Y. et al Energy and Geoscience Institute at the University of Utah

Sep 15, 2024
1 Resources
0 Stars
Curated

Utah FORGE: 2D and 3D Seismic Data

This set of data contains raw and Initially-processed 2D and 3D seismic data from the Utah FORGE study area near Roosevelt Hot Springs. Reprocessed versions of these data can be accessed at the linked submission in the Resources section titled "Reprocessed Seismic Reflection Data....

Miller, J. Energy and Geoscience Institute at the University of Utah

Mar 16, 2018
21 Resources
0 Stars
Publicly accessible

Utah FORGE: Microseismic Event Catalogues from the Well 16A(78)-32 Stimulation in April, 2022

This dataset includes three microseismic event catalogues from the three stages of stimulation in April 2022 of well 16A(78)-32 derived by Geo Energie Suisse. Each spreadsheet contains source times, xy location, depth, and seismic moment magnitude. An animation of the order in whi...

Karvounis, D. et al University of Utah Seismograph Stations

Oct 10, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE 1-2551: Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores Workshop Presentation and Report

Included here are a presentation recording, slides, and report on the Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores project by Colorado School of Mines, presented by Dr. William W. Fleckenstei...

Fleckenstein, W. et al Colorado School of Mines

Sep 08, 2023
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Geochemical Data for Cold Groundwaters and Produced Geothermal Fluids

Geochemical data for cold groundwaters and produced geothermal fluids around the Utah FORGE site. The data is compiled into four tables in the attached Excel File. Table 1 is a compilation of compositions (anions, cations, weak acids, oxygen, hydrogen, and carbon isotopes) for c...

Simmons, S. and Kirby, S. Energy and Geoscience Institute at the University of Utah

Aug 16, 2024
2 Resources
0 Stars
Curated

Utah FORGE 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone

This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE site. Boreholes will be electrically energized and will serve as data sources for future proposed electromagnetic bore...

Um, E. et al Lawrence Berkeley National Laboratory

Nov 15, 2022
4 Resources
0 Stars
Curated

Utah FORGE 6-3712: Probabilistic Estimation of Seismic Response Using Physics-Informed Recurrent Neural Networks 2024 Annual Workshop Presentation

This is a presentation on the Probabilistic Estimation of Seismic Response Using Physics-Informed Recurrent Neural Networks by GTC Analytics, presented by Jesse Williams. This video slide presentation discusses the development of machine learning-based predictive tools to estimate...

Williams, J. Energy and Geoscience Institute at the University of Utah

Sep 17, 2024
1 Resources
0 Stars
Curated

<< Previous 1 2 3 4 5 6 7 8 Next >>