Search GDR Data
Showing results 76 - 100 of 241.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
The U.S. Department of Energy's (U.S. DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is a field laboratory that provides a unique opportunity to develop and test new technologies for characterizing, creating and sustaining Enhanced Geothermal Systems (EGS) in ...
These core photos and descriptions were taken from the five boreholes that were drilled as part of the kISMET SubTER project conducted at the Sanford Underground Research Facility (SURF) in Lead, SD. The boreholes are subvertical in orientation, and were drilled on the 4850 level ...
This dataset contains experimental data from fluid injection experiments conducted to investigate the influence of temperature on fracture seismicity. The experiments were performed on granite samples from Utah FORGE. The samples were prepared with a 30-degree inclined fracture an...
This dataset includes earthquake catalogues for the three stages of the 2022 well 16A(78)-32 stimulation provided by Geo Energie Suisse. Events in these catalogues have been visually inspected. There are additional events of lower signal to noise that were automatically detected. ...
Utah FORGE held a two-day seismic workshop on the University of Utah campus in Salt Lake City, Utah on September 26 and 27, 2022 to share what was learned from the seismic monitoring during the 2022 stimulation. This is a report documenting this workshop. The meeting was structure...
This file contains the first set of tracer data for the EGS Collab testbed. The first set of tracer tests were conducted during October-November, 2018. We have included tracer data for C-dots, chloride, fluorescein, and rhodamine-B. The details about the tracer test can be found i...
This is a link to the Utah FORGE seismic data distribution site hosted by the University of Utah Seismograph Stations. The data was collected from downhole geophone strings in wells 56-32, 58-32 and 78B-32 during the 2022 stimulation of well 16A(78)-32. This dataset, which was upd...
These are revised catalogs, related to the April, 2022 well 16A(78)-32 stimulation (phases 1,2, & 3), provided by Geo Energie Suisse (GES) that include additional events at the start of Stage 1 and some tidying up of some locations. These catalogs also include events for additiona...
This is the set of earthquake catalogs developed for the Utah FORGE project covering December of 2016 through March of 2018. These are discussed in the "Utah FORGE Phase 2B Final Topical Report," which can be found on GDR under id: 1038 (See link 'Final Topical Report' in resource...
The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 1...
Included in this dataset is a spreadsheet with the primary fault information used in the basin model, a spreadsheet with earthquake magnitude estimates, and a figure showing location of faults and microseismicity in the Portland Basin
Included are experimental data recorded from shear experiments that specifically explore the link between fluid-injection rate and seismic moment resulting from shear reactivation of laboratory faults. Raw mechanical data from three experiments are included alongside corresponding...
ASCII text files containing grid-block name, X-Y-Z location, and multiple parameters from TOUGH2 simulation output of CO2 injection into an idealized single fault representing a dipping normal fault at the Desert Peak geothermal field (readable by GMS). The fault is composed of a ...
This report discusses the results of research on the ability to create and/or reactivate and subsequently sustain fracture systems which are strongly influenced by complexly coupled mechanical (M) and chemical (C) processes in reservoirs forced from equilibrium by hydraulic stimul...
The primary objective of our current research is to develop a computational test bed for evaluating borehole techniques to enhance fluid flow and heat transfer in enhanced geothermal systems (EGS). Simulating processes resulting in hydraulic fracturing and/or the remobilization of...
Hydraulic shearing is an appealing reservoir stimulation strategy for Enhanced Geothermal Systems. It is believed that hydro-shearing is likely to simulate a fracture network that covers a relatively large volume of the reservoir whereas hydro-fracturing tends to create a small nu...
Hypocenters of local microearthquakes and 3D P and S-velocity models computed by simultaneous inversion of arrival times recorded by the Brady seismic network Nov 2010-Mar 2015.
This is a presentation on the Strain Sensing Array to Characterize Deformation at the FORGE Site project by Clemson University, presented by Lawrence Murdoch. The project's objective was to evaluate the feasibility of measuring and interpreting tensor strain data to improve the pe...
This is a presentation on the Development of a Smart Completion & Stimulation Solution project by Welltec in collaboration with the University of Oklahoma, presented by Yosafat Esquitin, a Senior Business Development Manager at Welltec. The project's objective was to develop an an...
This report presents geodetic observations from the April 2024 stimulations at the Utah FORGE site, as part of LBNL FORGE Project 3-2535. It focuses on Distributed Strain Sensing (DSS) data from an optical fiber in well 16B, capturing localized strain linked to fracture propagatio...
This is a presentation on the Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency at the Utah FORGE Site project by The University of Texas at Austin, presented by Professor Mukul M. Sharma. The project's objectives were to place f...
This archive contains Excel spreadsheets containing microseismic events detected in the study area during Utah FORGE Phase 2C. The Readme file included that describes the meaning of the abbreviations used as field headers in the spreadsheets. Additionally, there is a .dat (text) f...
This dataset documents the FORGE 2024 stress-shadow seismic survey done in collaboration with the EarthScope Consortium. Original seismic waveform data are archived through EarthScope/NSF SAGE dataset 24-021. This GDR submission provides a link to the original EarthScope archive. ...
This is a presentation on the Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design at Utah FORGE project by Fervo Energy, presented by Sireesh Dadi. The project's objective was to develop a multistage hydraulic stimulation approach designed specifically to t...
This paper discusses the progress on a project funded by the DOE Utah FORGE (Frontier Observatory for Research in Geothermal Energy) for the development of a subsurface heat exchanger for Enhanced Geothermal Systems (EGS) using unique casing sleeves cemented in place and are used ...
Google Map