Search GDR Data

Three Dimensional Thermal Model of Newberry Volcano, Oregon

Final results of a 3D finite difference thermal model of Newberry Volcano, Oregon. Model data are formatted as a text file with four data columns (X, Y, Z, T). X and Y coordinates are in UTM (NAD83 Zone 10N), Z is elevation from mean sea level (meters), T is temperature in deg C. ...

Frone, Z. and Cladouhos, T. AltaRock Energy Inc

Jan 30, 2015
3 Resources
0 Stars
Publicly accessible

Chemical Impact of Elevated CO2 on Geothermal Energy Production

Numerical simulations have shown that the use of supercritical CO2 instead of water as a heat transfer fluid yields significantly greater heat extraction rates for geothermal energy. If this technology is implemented successfully, it could increase geothermal energy production and...

Carroll, S. et al Lawrence Livermore National Laboratory

Jan 01, 2013
3 Resources
0 Stars
Publicly accessible

Seismic Analysis of Spatio-Temporal Fracture Generation During EGS Resource Development Deviatoric MT, Fracture Network, and Final Report

This submission contains 167 deviatoric moment tensor (MT) solutions for the seismicity observed two years prior and three years post start of injection activities at The Geysers Prati 32 EGS Demonstration. Also included is a statistical representation of the properties of 751 fra...

Gritto, R. et al Array Information Technology

Sep 01, 2018
3 Resources
0 Stars
Publicly accessible

STRESSINVERSE Software for Stress Inversion

The STRESSINVERSE code uses an iterative method to find the nodal planes most consistent with the stress field given fault frictional properties. STRESINVERSE inverts the strike, rake and dip from moment tensor solutions for the in-situ state of stress. The code iteratively solves...

Gritto, R. Array Information Technology

Oct 31, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Development of Multi-Stage Fracturing System and Wellbore Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores

This paper discusses the progress on a project funded by the DOE Utah FORGE (Frontier Observatory for Research in Geothermal Energy) for the development of a subsurface heat exchanger for Enhanced Geothermal Systems (EGS) using unique casing sleeves cemented in place and are used ...

Fleckenstein, W. et al Colorado School of Mines

Oct 05, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Preliminary Report on Development of a Reservoir Seismic Velocity Model

This report describes the development of a preliminary 3D seismic velocity model at the Utah FORGE site and first results from estimating seismic resolution in the generated fracture volume during Stage 3 of the April 2022 stimulation. A preliminary 3D velocity model for the larg...

Gritto, R. Array Information Technology

Jan 30, 2023
1 Resources
0 Stars
Curated

Utah FORGE: Seismic DAS and Geophone Borehole Data Processing and 3D Imaging of Vp/Vs Ratio in the 2024 Stimulated Reservoir

This dataset includes a final report and a 3D velocity model derived from seismic DAS and geophone borehole data collected during the April 2024 stimulation of the reservoir at Utah FORGE. The report details the processing of over 50,000 P and S-wave travel times used in a tomogra...

Gritto, R. and Jarpe, S. EMR Solutions and Technology

Mar 17, 2025
2 Resources
0 Stars
Curated

Sedimentary Geothermal Feasibility in Nevada, Western Utah, Colorado, and the Gulf Coast Region of Texas Final Report

The objectives of this project were to (1) perform a literature review of sedimentary geothermal resources, (2) identify data sources and develop data-collection methodologies that characterize selected resources, (3) screen sedimentary basins and formations for sedimentary geothe...

Johnston, H. et al National Renewable Energy Laboratory

Jul 01, 2020
1 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Materials Testing Report

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This materials testing report is based on thermoplastic and elastomeric materia...

Teodoriu, C. et al Welltec

Nov 08, 2022
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Rock Properties

This is an Excel spreadsheet that contains rock properties from several wells in the Utah FORGE study area. This includes a map of the wells. Data is described in the Final Topical Report included in the resources below.

Gwynn, M. Energy and Geoscience Institute at the University of Utah

Apr 07, 2018
2 Resources
0 Stars
Publicly accessible

Reservoir Stimulation Optimization with Operational Monitoring for Creation of EGS

EGS field projects have not sustained production at rates greater than 1/2 of what is needed for economic viability. The primary limitation that makes commercial EGS infeasible is our current inability to cost-effectively create high-permeability reservoirs from impermeable, igneo...

A., C. Pacific Northwest National Laboratory

Sep 15, 2014
5 Resources
0 Stars
Publicly accessible

Utah FORGE 1-2409: Zonal Isolation Solution for Geothermal Wells Workshop Presentation

This is a presentation on the Zonal Isolation Solution for Geothermal Wells project by PetroQuip Energy Services, presented by VP of operations Robert Coon. The project's objective was to design and develop a multi-stage system for zonally isolating fluids inside and outside of g...

Coon, R. et al PetroQuip Energy Services

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Geomechanical Packer Formation Model Iteraction

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This presentation outlines the work in rock modelling and interaction with the ...

Ghassemi, A. et al Welltec

Jun 20, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Evaluation of Potential Geochemical Responses to Injection in the FORGE Geothermal Reservoir

Plugging of fracture porosity from mineral precipitation due to injecting cold water into a a geothermal reservoir can impact the overall permeability of the fracture network in the reservoir. This can have serious ramifications on the efficiency of the geothermal resource. Geoche...

Patil, V. and Simmons, S. Energy and Geoscience Institute at the University of Utah

Apr 03, 2019
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Microgravity Data

A 4D microgravity survey began in early 2019 in order to benchmark surface and subsurface elevations prior to Phase 3 drilling and stimulation campaigns. Microgravity stations are collocated with GPS deformation benchmarks and use the same location survey data. Surveys are underta...

Hardwick, C. Utah Geological Survey

Oct 07, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2404: Application of Advanced Techniques for Determination of Reservoir-Scale Stress State 2024 Annual Workshop Presentation

This is a presentation on the Application of Advanced Techniques for Determination of Reservoir-Scale Stress State at FORGE by the University of Oklahoma, presented by Ahmad Ghassemi. This video discusses how magnitude and orientation of natural in-situ principal stresses at dept...

Ghassemi, A. et al Energy and Geoscience Institute at the University of Utah

Aug 28, 2024
1 Resources
0 Stars
Curated

Seismic Analysis of Spatio-Temporal Fracture Generation During EGS Resource Development Full Moment Tensors and Stress Inversion Catalogs

This submission contains 167 full moment tensor (MT) solutions for the seismicity observed two years prior and three years post start of injection activities. Also included are the azimuth and plunge angles for the three main stress directions sigma1, sigma 2 and sigma 3 at the P...

Gritto, R. et al Array Information Technology

Sep 26, 2018
2 Resources
0 Stars
Publicly accessible

Full Moment Tensor Inversion Software

The link points to a website at NCEDC to download the full moment tensors inversion software The moment tensor analysis conducted in the current project is based on the full moment tensor model described in Minson and Dreger (2008). The software including source, examples and tut...

Gritto, R. and Dreger, D. Array Information Technology

Oct 31, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Planned Trajectory

This submission includes an Excel spreadsheet containing the Utah FORGE deep well 16A(78)-32 planned trajectory including UTM coordinates, elevations, and depths from the well head to the toe. This proposed new injection well is expected to descend vertically to a depth of approxi...

Podgorney, R. and Nash, G. Idaho National Laboratory

Mar 24, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE 6-3712: Report on a Data Foundation for Real-Time Identification of Microseismic Events

This submission is a technical report for the Probabilistic Estimation of Seismic Response Using Physics Informed Recurrent Neural Networks project. The report describes the process of extracting events from the borehole seismic sensors. To be effective once deployed, the process ...

Williams, J. et al Global Technology Connection, Inc.

Jan 21, 2025
3 Resources
0 Stars
Curated

Utah FORGE: Well 16A(78)-32 Logs

This dataset contains all well logs from Utah FORGE well 16A(78)-32. This includes the mud log, Sanvean Technologies logs, and Schlumberger logs. Please see the file descriptions below for information about each log.

Gilmour, B. et al Energy and Geoscience Institute at the University of Utah

Mar 08, 2021
7 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 X-ray Diffraction Data

This submission contains x-ray diffraction data taken from 3,600 to 10,987 feet deep in well 16A(78)-32 in the Roosevelt Hot Springs Geothermal Area as part of the Utah FORGE project. 78 rock samples were taken. Samples are taken in a range of ten feet at 100 foot increments. Mine...

Jones, C. Energy and Geoscience Institute at the University of Utah

Jul 29, 2021
1 Resources
0 Stars
Curated

A Thermal-Hydrological-Chemical Model for the EGS Demonstration Project at Newberry Volcano, OR

Newberry Volcano in Central Oregon is the site of a Department of Energy funded Enhanced Geothermal System (EGS) Demonstration Project. Stimulation and production of an EGS is a strong perturbation to the physical and chemical environment, giving rise to coupled Thermal-Hydrologic...

Sonnenthal, E. et al National Energy Technology Laboratory

Jan 30, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well Acord 1-26 Logs and Data: Roosevelt Hot Spring Area

This is a compilation of logs and data from Well Acord 1-26 in the Roosevelt Hot Springs area in Utah. This well is also in the Utah FORGE study area. Logs include: mud log (45'-12645'), compensated densilog (1102'-7923', 7900'-12644'), neutron log (1102'-7923'), dual induction ...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 03, 2016
1 Resources
0 Stars
Publicly accessible

Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration...

Iovenitti, J. AltaRock Energy Inc

May 15, 2013
1 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 Next >>