Search GDR Data

Showing results 76 - 100 of 113.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Technologies
Featured Projects
Topics
Data Type
"maximum shear strain rate"×
EGS×

Utah FORGE: Drilling Data for Student Competition

Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. This dataset includes both ...
Podgorney, R. et al Idaho National Laboratory
Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2615: Laboratory Data for Insights on Hydraulic Fracture Closure and Stress Measurement

This dataset includes data from injection/fall-off experiments conducted in controlled laboratory settings. The aim is to investigate the physics governing fracture closure and the associated stress measurements during hydraulic fracturing. These time series data include flow rat...
Ye, Z. and Ghassemi, A. The University of Oklahoma
Jun 12, 2024
5 Resources
0 Stars
Curated

Utah FORGE: Sanvean Technologies Drilling Data from Well 16B(78)-32

Included here is Sanvean Technologies bit sensor data amalgamated with data from National Oilwell Varco's (NOV) BlackBox tool for Reed Hycalog bits used during drilling of Well 16B(78)-32. The dataset contains information collected at the bit while drilling including rate of penet...
Barker, C. Energy and Geoscience Institute at the University of Utah
Oct 26, 2023
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Reports on Northwestern Nevada Well Doublet Drilling and Testing by Fervo Energy

These reports review Fervo Energy's construction of a commercial enhanced geothermal system (EGS). Fervo has qualified full functionality of the system through production testing at commercially relevant operating conditions. The project site is located in a nearfield setting ad...
Dadi, S. et al Fervo Energy
Sep 05, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Machine Learning for Well 16A(78)-32 Stress Predictions September 2023 Report

This task completion report documents the development and implementation of machine learning (ML) models for the prediction of in-situ vertical (Sv), minimum horizontal (SHmin) and maximum horizontal (SHmax) stresses in well 16A(78)-32. The detailed description of the experimental...
Mustafa, A. et al Battelle Memorial Institute
Sep 28, 2023
3 Resources
0 Stars
Curated

Test Report for Detonation Velocity Measurements

Test report for detonation velocity measurements. A series of tests were conducted to determine reaction rate and general behavior of aluminum (AL) and magnesium (MG) powder mixtures (metalized explosives) with Bullseye double-base smokeless propellant. Given the indeterminate sen...
Grubelich, M. Sandia National Laboratories
Jan 13, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2565: Hydrothermal Evolution of Fracture Properties Workshop Presentation

This is a presentation on the Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions project by the U.S. Geological Survey, presented by Dr. David Lockner. The project's objective was to determine how thermal, hydraulic, mechanical, and ch...
Lockner, D. et al United States Geological Survey
Sep 08, 2023
1 Resources
0 Stars
Curated

Utah FORGE 5-2428: Coupled Investigation of Fracture Permeability Impact on Reservoir Stress and Seismic Slip 2024 Annual Workshop Presentation

This is a presentation on the Coupled Investigation of Fracture Permeability Impact on Reservoir Stress and Seismic Slip Behavior by Lawrence Livermore National Laboratory, presented by Kayla Kroll. This presentation addresses testing and modelling related to the dependency of EG...
Kroll, K. et al Energy and Geoscience Institute at the University of Utah
Aug 27, 2024
1 Resources
0 Stars
Curated

Hybrid machine learning model to predict 3D in-situ permeability evolution

Enhanced geothermal systems (EGS) can provide a sustainable and renewable solution to the new energy transition. Its potential relies on the ability to create a reservoir and to accurately evaluate its evolving hydraulic properties to predict fluid flow and estimate ultimate therm...
Elsworth, D. and Marone, C. Pennsylvania State University
Nov 22, 2022
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Core Analyses

This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF format, and spreadsheets containing tables from the reports as part of Utah FORGE Phase 2B. Please refer to the repor...
McLennan, J. Energy and Geoscience Institute at the University of Utah
May 30, 2018
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: 3D Temperature Model

x,y,z data of the 3D temperature model for the West Flank Coso FORGE site. Model grid spacing is 250m. The temperature model for the Coso geothermal field used over 100 geothermal production sized wells and intermediate-depth temperature holes. At the near surface of this model,...
Blankenship, D. Sandia National Laboratories
Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Powder X-ray Diffraction Data from Well 16A(78)-32 Core

This dataset from Lawrence Livermore National Laboratory (LLNL) consists of four raw X-ray diffraction (XRD) scans and preliminary results of quantitative XRD analysis. The scanned samples were prepared from four subcores, which came from various depths of the FORGE well 16A(78)-3...
Kroll, K. et al Lawrence Livermore National Laboratory
Jul 27, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32

This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-...
Lu, G. et al University of Pittsburgh
Aug 30, 2024
2 Resources
0 Stars
Curated

Utah FORGE: Phase 3 InSAR Study Results

Ground movement is evaluated through analysis of Interferometric Synthetic Aperture Radar (InSAR) interferograms. Results indicate there has been no detectable ground movement at millimeter scale. The zipped file in this submission contains a report, maps, and results from the InS...
Feigl, K. and Batzli, S. Department of Geoscience University of Wisconsin-Madison
Sep 24, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Injection and Production Test results and Reports from August 2024

This dataset includes results and reports from the injection/production test for wells 16A(78)-32 and 16B(78)-32 in August, 2024 at Utah FORGE. Materials include injection, post stimulation production, flow rate, gamma, temperature and pressure survey results. For the respective ...
Kolomytsev, L. and Chadwick, C. Energy and Geoscience Institute at the University of Utah
Sep 24, 2024
2 Resources
0 Stars
Curated

Utah FORGE: Well 58-32 Schlumberger FMI Logs DLIS and XML files

This zipped data set includes Schlumberger FMI logs DLIS and XML files from Utah FORGE deep well 58-32. These include runs 1 (2226-7550 ft) and 2 (7440-7550 ft). Run 3 (7390-7527ft) was acquired during phase 2C.
Nash, G. and Moore, J. Energy and Geoscience Institute at the University of Utah
Nov 17, 2017
4 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Circulation Testing Processed data

This submission includes processed and reduced data for circulation testing that was conducted at the 164' fracture on the 4850 ft level of the Sanford Underground Research Facility. The circulation tests were done to test the flow through the 164' fracture in the EGS Collab Exper...
Fu, P. et al Lawrence Livermore National Laboratory
Apr 01, 2021
7 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2557: Role of Fluid and Temperature in Fracture Mechanics and Couples THMC Processes for Enhanced Geothermal Systems 2024 Annual Workshop Presentation

This is a presentation on the Role of Fluid and Temperature in Fracture Mechanics and Couples THMC Processes for Enhanced Geothermal Systems by Purdue University, presented by Laura Pyrak-Nolte. This video slide presentation describes the development and validation of a macroscopi...
Pyrak-Nolte, L. Energy and Geoscience Institute at the University of Utah
Aug 13, 2024
1 Resources
0 Stars
Curated

Utah FORGE 5-2557: Fluid and Temperature in Fracture Mechanics and Coupled THMC Processes Workshop Presentation

This is a presentation on the Role of Fluid and Temperature in Fracture Mechanics and Coupled Thermo-Hydro-Mechanical-Chemical (THMC) Processes for Enhanced Geothermal Systems project by Purdue University, presented by Distinguished Professor of Physics & Astronomy, Laura J. Pyrak...
Pyrak-Nolte, L. Purdue University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16B(78)-32 Distributed Temperature Sensing Data from April and May 2024

This dataset includes Neubrex Energy Services fiber optic distributed temperature sensing (DTS) data from well 16B(78)-32 during stimulation and circulation, including interaction with well 16A(78)-32, during April and May 2024. The DTS data are stored in HDF5 file format and are ...
Jurick, D. and Guzik, A. Energy and Geoscience Institute at the University of Utah
Jul 08, 2024
1 Resources
0 Stars
Curated

Life Cycle Water Consumption and Water Resource Assessment for Utility-Scale Geothermal Systems: An In-Depth Analysis of Historical and Forthcoming EGS Projects

This report is the third in a series of reports sponsored by the U.S. Department of Energy Geothermal Technologies Program in which a range of water-related issues surrounding geothermal power production are evaluated. The first report made an initial attempt at quantifying the li...
Schroeder, J. et al Argonne National Laboratory
Aug 31, 2013
11 Resources
0 Stars
Publicly accessible

Effective Elastic and Neutron Capture Cross Section Calculations Corresponding to Simulated Fluid Properties from CO2 Push-Pull Simulations

The submission contains a .xls files consisting of 10 excel sheets, which contain combined list of pressure, saturation, salinity, temperature profiles from the simulation of CO2 push-pull using Brady reservoir model and the corresponding effective compressional and shear velocity...
Chugunov, N. and Altundas, B. Lawrence Berkeley National Laboratory
Mar 07, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439: A Multi-Component Approach to Characterizing In-Situ Stress: Laboratory, Modeling and Field Measurement Workshop Presentation

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement project by Battelle [Columbus, OH], presented by Mark Kelley. The project's objective was to characterize stress in the U...
Kelley, M. and Bunger, A. Battelle Memorial Institute
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 2C Topical Report

This is the topical report that wraps up the work and results achieved during Utah FORGE Phase 2C. The zip file includes several folders containing (1) an overview; (2) the results; (3) the lessons learned; and (4) the conclusions. It also contains a folder containing appendices i...
Moore, J. et al Energy and Geoscience Institute at the University of Utah
Dec 11, 2019
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1 Stimulation Data

Stimulation data from Experiment 1 of EGS Collab, which occurred on the 4850 ft level of the Sanford Underground Research Facility (SURF). A detailed description of the stimulation data is provided in the StimulationDataNotes.docx and is also available on the EGS Collab Wiki. A M...
Knox, H. et al Pacific Northwest National Laboratory
Aug 13, 2020
6 Resources
0 Stars
Publicly accessible
<< Previous12345Next >>