Search GDR Data
Showing results 1 - 25 of 96.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
The steel pipe experiment conducted in the lab was using 6 meter low-carbon steel pipe. We tested it with both dry and in-water condition. In the dry experimental setup, a coaxial cable acting as a return path in the air.
This data file is for the hydroshear simulation lab test 3.2. The two previous hydroshear simulation lab tests are linked in the resources section as GDR submissions. In this test a sample of granite with a pre-cut (man made fracture) is confined, heated and differential stress is...
This project focused on assessment and discovery of fluid-rock interaction in geothermal reservoirs. We accomplished work in four main areas: 1) fracture formation and the relationship between fluid flow and shear failure, 2) assessment of fracture geometry and fluid permeability ...
The EGS Collab SIGMA-V project is a multi-lab and university collaborative research project that is being undertaken at the Sanford Underground Research Facility (SURF) in South Dakota. The project consists of studying stimulation, fluid-flow, and heat transfer processes at a scal...
This dataset includes results of direct shear tests to investigate the mechanical and geophysical response of dry and saturated fractures in Indiana limestone and Sierra White granite. Direct shear tests were performed on tensile-induced fractures in Indiana limestone and Sierra W...
Lab-scale stimulation was performed on Coso samples obtained from a single core (1623 feet TVD, reservoir Coso CGC 18-27) using StimuFrac and control fluid in the absence of stimuli-responsive polymer.
Lab-scale stimulation work on non-porous fused silica (similar mechanical properties to igneous rock) was performed using pure water, pure CO2 and water/CO2 mixtures to compare back to back fracturing performance of these fluids with PNNL's StimuFrac.
This dataset contains results from laboratory direct shear experiments performed on tension-induced fractures in Sierra White granite under saturated conditions at target temperatures of 50 C and 100 C. The data were collected using a custom water-pressurized chamber equipped with...
The Geothermal Limitless Approach to Drilling Efficiencies (GLADE) project was undertaken in Denver-Julesburg (DJ) Basin Colorado to evaluate whether advanced oil and gas drilling practices could be adapted to improve geothermal well construction in deep, hot, hard-rock environmen...
We developed a model for fracture production produced during detonation of an explosive mixture in a 10m packed off section of a shallow borehole. The model is based upon an actual field and lab experiments on low-damage borehole fracturing performed at Sandia National Labs by Mar...
This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF format, and spreadsheets containing tables from the reports as part of Utah FORGE Phase 2B. Please refer to the repor...
Map of the PoroTomo Laboratory at Brady Field, Nevada. Map includes locations of GPS Stations, Shaker Stations, Vibroseis Sites, Seismometers, Fiber-Optic Cables, and wells
SMU Geothermal Lab developed a methodology to estimate shallow (1 km to 4 km) Enhanced Geothermal Systems (EGS) resource potential using an approach that utilizes recent geology and geophysical research along with new well data to improve the thermal conductivity model, mitigate i...
This entry contains raw data files from experiments performed on the Vulcan beamline at the Spallation Neutron Source at Oak Ridge National Laboratory using a pressure cell. Cylindrical granite and marble samples were subjected to confining pressures of either 0 psi or approximate...
EGS field projects have not sustained production at rates greater than 1/2 of what is needed for economic viability. The primary limitation that makes commercial EGS infeasible is our current inability to cost-effectively create high-permeability reservoirs from impermeable, igneo...
Included are data from triaxial, single-inclined-fracture friction experiments. The experiments were performed with slide-hold-slide protocol on Utah FORGE gneiss at increased temperature. With a ~10 MPa normal stress, temperatures vary between experiments from room temperature u...
Included are experimental data recorded from shear experiments that explore the effects of pore pressure heterogeneity on microseismic character and fault slip timing resulting from shear reactivation of laboratory faults. Raw mechanical and acoustic data from 15 experiments are i...
Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite.
All expe...
Core logs from the EGS Collab project Experiment 1 for the stimulation (Injection) well (E1-I), the Production well (E1-P), and monitoring wells (E1-OT, E1-OB, E1-PST, E1-PSB, E1-PDT, and E1-PDB) on the 4850 Level of SURF (the Sanford Underground Research Facility), single PDF fil...
This dataset contains results from five laboratory shear experiments on gneiss and granitoid samples from the Utah FORGE site, conducted at Penn State University. The experiments investigate links between fault surface roughness, frictional behavior, permeability, and P-wave acous...
This report describes the current status of the Vertical Electromagnetic Profiling, or VEMP tool, that is on loan to Lawrence Berkeley National Lab (LBNL) from Geothermal Energy Research and Development Co., Ltd. (GERD), Japan. The report describes the initial inspection of the to...
This dataset contains experimental and acoustic data from shear reactivation tests that investigate the relationship between fluid-injection rate, pore pressure distribution, and seismic moment during laboratory fault slip. It includes raw mechanical data and acoustic emission rec...
This dataset includes data from injection/fall-off experiments conducted in controlled laboratory settings. The aim is to investigate the physics governing fracture closure and the associated stress measurements during hydraulic fracturing. These time series data include flow rat...
The EGS Collab experiment 2 was focused on testing shear stimulation techniques. Shear stimulation, in this case, means using hydraulic pressure to cause shear slip on preexisting fracture or fault planes such that the hydraulic conductivity of the fracture or fault increases. The...
This dataset contains results from four fluid injection experiments at 24 C, 69 C, 111 C, and 140 C using a triaxial loading apparatus ("Temco"). Tests were conducted on a Utah FORGE granite sample with a 30 degree inclined fracture. Confining pressure was maintained at 10 MPa, wh...
Google Map