Search GDR Data
Showing results 1 - 25 of 35.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
This project focused on assessment and discovery of fluid-rock interaction in geothermal reservoirs. We accomplished work in four main areas: 1) fracture formation and the relationship between fluid flow and shear failure, 2) assessment of fracture geometry and fluid permeability ...
Data from high temperature dynamic sealing tests for various fracture widths, at various temperatures (degrees F), with 5 wt.% bentonite-based mud containing various material fiber contents, at 100 to 400 psi differential pressure.
Data from pressure test and evaluation of the dy...
This is a dataset for a 200ppm europium solution sent through a column with 12g of media #1 at pH of 3.2. This column experiment was run at ambient temperature at a flow rate of 2mL/min.
Document describing the methodology used to determine the accelerometers' three-component orientations at the first EGS Collab testbed using Continuous Active-Source Seismic Monitoring (CASSM) data and hodogram analysis.
Original submission: gdr.openei.org/submissions/1166
This data is from a regeneration study from a dynamic column extraction experiment where we ran a solution of REE's through a column of media #1 then stripped the REE's off the media using 2M HNO3 solution. We then re-equilibrated the media and repeated the process of running a RE...
This dataset contains open-hole geophysical and mud logging measurements acquired in 2022 from Monitoring Well 73-22 in the Blue Mountain Geothermal Field, Humboldt County, Nevada. Data were collected by Baker Hughes, Baker Atlas, Horizon Well Logging, and other service providers ...
Static and dynamic elastic properties (Young's modulus, Shear Modulus, P-wave Modulus, and Poisson's Ratio) of amphibolites and rhyolites from the TV4100 and TH4100 boreholes at the Sanford Underground Research Laboratory (SURF). Elastic properties include Young's modulus, Poisson...
The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for enhanced geothermal energy production through execution of intensely monitored meso-scale experiments. The first expe...
This dataset contains a Modelica-based dynamic thermal simulation model of the Seward Heat Loop project. The model contains building loads generated from DesignBuilder simulations of the four city-owned buildings that are connected to the system. These buildings are heated by a hy...
Simulation input and output files, post-processed figures and excel tables, and tecplot layout files for generating figures. These simulations were run with TOUGHREACT V4.12 by Lawrence Berkeley National Laboratory in 2021. This work was completed as part of the geologic thermal e...
Final report for the DOE GTO funded research on geologic thermal energy storage (GeoTES), or commonly known as reservoir thermal energy storage (RTES).
The results described in this report shed light on various aspects of RTES including project siting, operational performance, m...
This submission houses the companion code for the manuscript by Zhengfa Bi (Lawrence Berkeley National Laboratory) and Nori Nakata (Lawrence Berkeley National Laboratory; MIT). Both the companion code and manuscript are included in the resources section of this submission.
Fluid ...
This dataset includes geological and geophysical well logs from the Gold 4-PB well at the Cape EGS site near Utah FORGE, collected between December 2024 and January 2025. The dataset covers lithological, geochemical, and petrophysical data acquired during and after drilling. Data ...
Grid-scale energy storage has been identified as a needed technology to support the continued build-out of intermittent renewable energy resources. As of April 2017, the U.S. had approximately 24.2 GW of energy storage on line, compared to 1,081 GW of installed generation capacity...
An x,y,z scattered data file for the 3D geologic model of the Fallon FORGE site. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding al...
This is an x,y,z file of the West Flank FORGE 3D geologic model. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding algorithm.
The da...
This spreadsheet consist of data and graphs from deep well 58-32 stress testing from 6900 7500 ft depth. Measured stress data were used to correct logging predictions of in situ stress. Stress plots shows pore pressure (measured during the injection testing), the total vertical in...
The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of the inherent challenges in geothermal environments, there are limitations in selecting proper lost circulation mate...
This data set includes the numerical modeling input files and output files used to synthesize data, and the reduced-order machine learning models trained from the synthesized data for reservoir thermal energy storage site identification.
In this study, a machine-learning-assiste...
This paper presents a generalized form of the displacement correlation method (the GDC method), which can use any linear or quadratic finite element type with homogeneous meshing without local refinement. These two features are critical for modeling dynamic fracture propagation pr...
Accurate dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange for seasonal energy storage. Current modeling approaches in building and district energy simulation tools typically consider heat conduct...
This is a presentation on the Role of Fluid and Temperature in Fracture Mechanics and Coupled Thermo-Hydro-Mechanical-Chemical (THMC) Processes for Enhanced Geothermal Systems project by Purdue University, presented by Distinguished Professor of Physics & Astronomy, Laura J. Pyrak...
This submission contains a link to the EDX Collaborative Workspace where the MT data collected in support of the DOE GTO 4D EGS monitoring project is stored.
Daily production reports- Oregon State University (OSU) had 6 stations running continuously.
--Dynamic survey map, KML f...
Polymer-cement experiments were conducted in order to assess the chemical and thermal properties of various polymer-cement composites. This file set includes the following polymer-cement analyses:
Polymer-Cement Composite Synthesis
Polymer-Cement Interactions by Atomistic Simulat...
This dataset contains results from a pump and probe experiment conducted on an intact Westerly Granite sample with a diameter of 1 inch and a height of 1 3/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-linear acou...
Google Map