Search GDR Data

Utah FORGE: Temperature-Dependent Fracture Seismicity from Fluid Injection Experiments

This dataset contains experimental data from fluid injection experiments conducted to investigate the influence of temperature on fracture seismicity. The experiments were performed on granite samples from Utah FORGE. The samples were prepared with a 30-degree inclined fracture an...

Wang, J. et al Pennsylvania State University

Feb 29, 2024
4 Resources
0 Stars
Publicly accessible

High-Pressure Combustion and Deflagration-to-Detonation Transition in Ethylene/Nitrous Oxide Mixtures

In this paper, the combustion of nitrous oxide with a simple hydrocarbon, ethylene, at high initial pressures is investigated. A series of experiments were conducted using a stoichiometric C2H4-N2O mixture in a round, smooth-walled tube with initial pressures of 125 to 337 psi. ...

Grubelich, M. Sandia National Laboratories

Nov 01, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Core Material Friction Experiments

The following folders contain 3 friction experiments on Utah FORGE core material from depths of 6735 8533ft. The experiment conditions range from 100% relative humidity at room temperature to fluid-saturated at 110C. Experiments were done on both intact samples in a single-direct ...

Marone, C. et al Pennsylvania State University

Mar 15, 2023
7 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2514: Final Report and Presentation on a Strain Sensing Array to Characterize Deformation

This dataset contains the final technical report and closeout presentation for the project A Strain Sensing Array to Characterize Deformation at the Utah FORGE Site, carried out from 2021 to 2025 by Clemson University in collaboration with the U.S. Geological Survey and UNAVCO. Th...

Murdoch, L. Clemson University

Dec 25, 2025
2 Resources
0 Stars
Curated

Ionic Fluids for EGS: Rheological Behavior under HPHT Conditions

This dataset contains high-pressure, high-temperature (HPHT) rheological measurements of ionic liquids and alternative geothermal fluids. Experiments were conducted at Oklahoma State University using a Chandler Model 5550 viscometer and Rheo 5000 software to evaluate the flow beha...

Maitra, E. and Al Dushaishi, M. Oklahoma State University

Sep 13, 2025
2 Resources
0 Stars
Curated

Utah FORGE 6-3656: Real-Time Traffic Light System and Reservoir Engineering with Seismicity Forecasting and Ground Motion Prediction 2025 Workshop Presentation

This is a presentation on Real-Time Robust Adaptive Traffic Light System and Reservoir Engineering with Machine-Learning-Based Seismicity Forecasting and Data-Driven Ground Motion Prediction (RT Forecast) by Lawrence Berkeley National Laboratory, presented by Nori Nakata. This vid...

Nakata, N. Lawrence Berkeley National Laboratory

Sep 18, 2025
3 Resources
0 Stars
Curated

Utah FORGE 5-2615: Laboratory Data for Insights on Hydraulic Fracture Closure and Stress Measurement

This dataset includes data from injection/fall-off experiments conducted in controlled laboratory settings. The aim is to investigate the physics governing fracture closure and the associated stress measurements during hydraulic fracturing. These time series data include flow rat...

Ye, Z. and Ghassemi, A. University of Oklahoma

Jun 12, 2024
6 Resources
0 Stars
Publicly accessible

Development of a Downhole Tool Measuring Real-Time Concentration of Ionic Tracers and pH in Geothermal Reservoirs

For enhanced or Engineered Geothermal Systems (EGS) geothermal brine is pumped to the surface via the production wells, the heat extracted to turn a turbine to generate electricity, and the spent brine re-injected via injection wells back underground. If designed properly, the sub...

Hess, R. et al Sandia National Laboratories

Mar 31, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Friction-Permeability-Seismicity Laboratory Experiments with Non-Linear Acoustics

Laboratory experimental data on saw-cut interface of Westerly Granite and Utah Forge granitoid rocks. Experiments include velocity-stepping and fluid pressure stepping experiments. Mechanical data from 3 ISCO pumps connected to a Temco pressure vessel measure axial, confining and ...

Eijsink, A. and Elsworth, D. Pennsylvania State University

Jul 08, 2022
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All expe...

Yu, J. et al Pennsylvania State University

Jul 01, 2023
27 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2615: Final Report for the Experimental Determination and Modeling-Informed Analysis of Thermo-Poromechanical Response of Fractured Rock

This is the final technical report documenting laboratory experiments and modeling conducted to characterize the thermo-poromechanical behavior of fractured crystalline rocks for application to Utah FORGE. The report includes measurements of poroelastic and thermo-poroelastic prop...

Ghassemi, A. The University of Oklahoma

Jun 30, 2025
1 Resources
0 Stars
Curated

Utah FORGE 2-2446: Report on Laboratory Block Experiments with Six Different Combinations of Stresses and Rock Fabrics

This report documents a series of block-scale hydraulic fracturing experiments, simulating Utah FORGE conditions to investigate how different combinations of in situ stress regimes, well orientations, and thermal stress conditions influence fracture initiation and propagation. The...

Bunger, A. and Lu, Y. Lawrence Livermore National Laboratory

Jan 30, 2025
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2557: Final Report and Presentation for the Role of Fluid and Temperature in Fracture Mechanics and Coupled THMC Processes for Enhanced Geothermal Systems

This contains a final technical report and closeout presentation recording summarizing the results from Utah FORGE Project 5-2557 on the role of fluid pressure and temperature in fracture mechanics and coupled thermo-hydro-mechanical-chemical (THMC) processes relevant to enhanced ...

Pyrak-Nolte, L. Purdue University

Nov 30, 2025
2 Resources
0 Stars
Curated

Utah FORGE: Well 16A(78)-32 Core-Flooding Experiment Results

This dataset contains core-flood experimental results from the Utah FORGE project, generated through laboratory tests at Lawrence Livermore National Laboratory. The experiments were conducted at temperatures of 100C and 200C using core samples from the 16A(78)-32 well. The primary...

Smith, M. et al Lawrence Livermore National Laboratory

Apr 04, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2419: Fluid Injection Experiments on Granite Samples at Four Different Temperatures

This dataset contains results from four fluid injection experiments at 24 C, 69 C, 111 C, and 140 C using a triaxial loading apparatus ("Temco"). Tests were conducted on a Utah FORGE granite sample with a 30 degree inclined fracture. Confining pressure was maintained at 10 MPa, wh...

Wang, J. and Elsworth, D. Pennsylvania State University

Sep 05, 2024
4 Resources
0 Stars
Curated

Utah FORGE: Fluid Injection Induced Shearing Experiments on Fractured Granitoid at Elevated Temperatures

This repository contains experimental data from a series of fluid injection-induced shearing tests conducted on Utah FORGE granitoid. The experiments were performed using an aluminum triaxial pressure vessel (TEMCO) apparatus at Pennsylvania State University. The primary aim was t...

Elsworth, D. et al Pennsylvania State University

Aug 12, 2024
16 Resources
0 Stars
Publicly accessible

Testing LCM on a Large Scale for Geothermal Drilling Applications Using a Novel Experimental Setup

Rheology data obtained from flow loop tests, performed using different lost circulation materials (LCM) to study their effect on fluid rheology and wellbore hydraulics. The sealing performance of different LCM was tested using different fracture sizes. Five academic papers / repor...

Mohamed, A. et al University of Oklahoma

Apr 22, 2022
10 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Shear Reactivation Experimental Data for Fluid Injection-Rate Controls on Seismic Moment

Included are experimental data recorded from shear experiments that specifically explore the link between fluid-injection rate and seismic moment resulting from shear reactivation of laboratory faults. Raw mechanical data from three experiments are included alongside corresponding...

Roseboom, M. et al Pennsylvania State University

Nov 07, 2023
6 Resources
0 Stars
Publicly accessible

Experimental Images and Videos of Foam Stability (Half-life)

The experimental data obtained in this project is the thermal stability data of various foams measured using the setup established at Temple University during this study. The setup is installed with a portable digital camera which can take images and videos of foam evolution at a ...

Thakor, V. et al Temple University

Sep 15, 2021
10 Resources
0 Stars
Publicly accessible

Utah FORGE: Slide-Hold-Slide Experiments on Westerly Granite at Temperatures up to 250 Degrees C

Laboratory slide-hold-slide tests were conducted in a conventional triaxial deformation configuration on 1-inch diameter cylindrical cores of Westerly granite bisected by a sawcut oriented at 30 degrees from vertical. Tests were conducted at a constant confining pressure of 30 MPa...

Jeppson, T. et al United States Geological Survey

Oct 10, 2023
2 Resources
0 Stars
Publicly accessible

Chemical, Calcium Phosphate Cements for Geothermal Wells Corrosion Protection, Bond Strength and Matrix Self-Healing

The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and potential), bond and matrix strength, as well as matrix strength recovery after impos...

Sugama, T. Brookhaven National Laboratory

Sep 26, 2017
2 Resources
0 Stars
Publicly accessible

Ionic Fluids for EGS: Thermohydraulic Flow Data for Alternative Geothermal Fluids

This dataset contains thermohydraulic measurements of fluid flow through single and dual fracture systems under controlled laboratory conditions. Experiments were conducted at Oklahoma State University using various ionic and nonionic fluids, including deep eutectic solvents (DES)...

Maitra, E. et al Oklahoma State University

Sep 13, 2025
8 Resources
0 Stars
Curated

Data of High-Temperature Dynamic LCM Testing Setup

Data from high temperature dynamic sealing tests for various fracture widths, at various temperatures (degrees F), with 5 wt.% bentonite-based mud containing various material fiber contents, at 100 to 400 psi differential pressure. Data from pressure test and evaluation of the dy...

Magzoub, M. et al University of Oklahoma

May 31, 2021
11 Resources
0 Stars
Publicly accessible

Chlorite Dissolution Rates From 25 to 275 degrees and pH 3 to 10

We have calculated a chlorite dissolution rate equation at far from equilibrium conditions by combining new data (20 experiments at high temperature) with previously published data Smith et al. 2013 and Lowson et al. 2007. All rate data (from the 127 experiments) are tabulated in...

Lawrence Livermore National Laboratory

Sep 27, 2013
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Fluid Injection-Rate Controls on Seismic Moment from Laboratory Fault Reactivation Experiments

This dataset contains experimental and acoustic data from shear reactivation tests that investigate the relationship between fluid-injection rate, pore pressure distribution, and seismic moment during laboratory fault slip. It includes raw mechanical data and acoustic emission rec...