Search GDR Data
Showing results 1 - 25 of 30.
Show
results per page.
Order by:
Availability:
Technologies
Featured Projects
Topics
Data Type
Silica Precipitation from Geothermal Brines: Effects of Iron Addition, Kinetics, Temperature, pH, and Brine Concentration
This document provides results of experiments aimed at removing silica from geothermal brines. All experiments were conducted with simulated brines. The data presented shows the effect of iron addition, kinetics, temperature, pH and brine concentration.
Southern Research Institute
Feb 06, 2016
1 Resources
Publicly accessible
1 Resources
Publicly accessible
Chlorite Dissolution Kinetics at Variable pH and Temperatures up to 275C
FY13 annual report describing the calculations and results associated with the data and dissolution rate contained in "Chlorite Kinetic Dissolution Data and Rate" (linked below).
Carroll, S. and Smith, M. Lawrence Livermore National Laboratory
Oct 01, 2013
2 Resources
Curated
2 Resources
Curated
Chlorite Dissolution Rates
Spreadsheets provides measured chlorite rate data from 100 to 300 degrees C at elevated CO2. Spreadsheet includes derived rate equation.
Lawrence Livermore National Laboratory
Jul 01, 2013
1 Resources
Publicly accessible
1 Resources
Publicly accessible
Chlorite Dissolution Rates From 25 to 275 degrees and pH 3 to 10
We have calculated a chlorite dissolution rate equation at far from equilibrium conditions by combining new data (20 experiments at high temperature) with previously published data Smith et al. 2013 and Lowson et al. 2007. All rate data (from the 127 experiments) are tabulated in...
Lawrence Livermore National Laboratory
Sep 27, 2013
2 Resources
Curated
2 Resources
Curated
Chlorite, Biotite, Illite, Muscovite and Feldspar Dissolution Kinetics at Variable pH and Temperatures up to 280 deg C
Chemical reactions pose an important but poorly understood threat to EGS long-term success because of their impact on fracture permeability. This report summarizes the dissolution rate equations for layered silicates where data were lacking for geothermal systems. Here we report ...
Carroll, S. et al Lawrence Livermore National Laboratory
Feb 24, 2017
2 Resources
Publicly accessible
2 Resources
Publicly accessible
Ground Source Heat Pump Parameter Survey
The purpose of this report is to investigate the effects of various parameters in a horizontal loop geothermal heat pump system. The obtained values include the temperature distribution over the entire system as well as the exiting temperature and bulk heat rate of the fluid. The ...
Gray, E. Wright State University
Jul 31, 2013
1 Resources
Publicly accessible
1 Resources
Publicly accessible
Illite Dissolution Rates and Equation (100 to 280 deg C)
The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and temperature conditions representative of subsurface conditions in natural and/or engineered geothermal reservoirs. Usi...
Carroll, S. Lawrence Livermore National Laboratory
Oct 17, 2014
1 Resources
Publicly accessible
1 Resources
Publicly accessible
Lithium Sorption from Simulated Geothermal Brine: Impact of pH, Temperature, and Brine Chemistry
Lithium sorption information from experiments. Data includes the effects of pH, temperature and brine chemistry on the sorption of Lithium from a simulated geothermal brine. The sorbent used in the experiments is "hydrothermally produced, Spinel-LiMn2O4". The sorbent was produ...
Southern Research Institute
Feb 06, 2016
1 Resources
Publicly accessible
1 Resources
Publicly accessible
EGS Collab Experiment 1: DNA tracer data on transport through porous media
This submission contains DNA tracer data that supports the analysis and conclusions of the publication, "DNA tracer transport through porous media The effect of DNA length and adsorption." https://doi.org/10.1029/2020WR028382. This experiment used DNA as an artificial reservoir t...
Zhang, Y. et al Stanford University
Nov 21, 2020
3 Resources
Curated
3 Resources
Curated
Geothermics paper Rheological investigation of effect of high temperature on geothermal drilling fuids additives and lost circulation materials
Paper title "Rheological investigation of effect of high temperature on geothermal drilling fluids additives and lost circulation materials". The paper was published in Geothermics 96 (2021) 102219.
Vivas, C. and Salehi, S. University of Oklahoma
Jan 04, 2023
1 Resources
Awaiting curation
1 Resources
Awaiting curation
Coupling Subsurface and Above-Surface Models for Optimizing the Design of Borefields and District Heating and Cooling Systems
Accurate dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange for seasonal energy storage. Current modeling approaches in building and district energy simulation tools typically consider heat conduct...
Hu, J. et al Lawrence Berkeley National Laboratory
Jan 31, 2022
10 Resources
Curated
10 Resources
Curated
JPSE paper Evaluating sealability of blended smart polymer and fiber additive for geothermal drilling with the effect of fracture opening size
Paper title "Evaluating sealability of blended smart polymer and fiber additive for geothermal drilling with the effect of fracture opening size". The paper was published in the Journal of Petroleum Science and Engineering 206 (2021) 108998.
Magzoub, M. et al University of Oklahoma
Jan 04, 2023
1 Resources
Awaiting curation
1 Resources
Awaiting curation
SMP preparing and programing, and characterization
SMP preparation
The SMP was synthesized out of a readily available commercial epoxy resin (EPON 826, a bisphenol-based resin) cured by an isophorone diamine (IPD) crosslinker. Each 100g EPON 826 was bonded with 23.2 g IPD to balance out the stoichiometry.
SMP Programing
The fre...
Salehi, S. University of Oklahoma
Jan 04, 2023
3 Resources
Awaiting curation
3 Resources
Awaiting curation
3-D Geologic Controls of Hydrothermal Fluid Flow at Brady Geothermal Field, Nevada using PCA
In many hydrothermal systems, fracture permeability along faults provides pathways for groundwater to transport heat from depth. Faulting generates a range of deformation styles that cross-cut heterogeneous geology, resulting in complex patterns of permeability, porosity, and hydr...
Siler, D. and Pepin, J. United States Geological Survey
Oct 01, 2021
4 Resources
Curated
4 Resources
Curated
Kinetics of Chlorite Dissolution at Elevated Temperatures and CO2 Conditions
Chlorite dissolution kinetics were measured under far from equilibrium conditions using a mixed-flow reactor over temperatures of 100-275 degrees C at pH values of 3.0-5.7 in a background solution matrix of 0.05 m NaCl. Over this temperature range, magnesium was released congruent...
Carroll, S. et al Lawrence Livermore National Laboratory
Jul 01, 2013
1 Resources
Publicly accessible
1 Resources
Publicly accessible
DCIF (Directional Cooling-Induced Fracturing) Westerly Granite AE Borehole Damage Effect Test (Task 3-0)
Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on three rectangular Westerly granite blocks (width=depth=4.0", height=2.0") which were preheated to 200, 400, and 600 degree C to induce damage (microcracks) with varying degrees. Liquid nitrogen was poured...
Nakagawa, S. Lawrence Berkeley National Laboratory
Jan 27, 2022
13 Resources
Curated
13 Resources
Curated
High-Pressure Combustion and Deflagration-to-Detonation Transition in Ethylene/Nitrous Oxide Mixtures
In this paper, the combustion of nitrous oxide with a simple hydrocarbon, ethylene, at high initial pressures is investigated. A series of experiments were conducted using a stoichiometric C2H4-N2O mixture in a round, smooth-walled tube with initial pressures of 125 to 337 psi. ...
Sandia National Laboratories
Nov 01, 2013
1 Resources
Publicly accessible
1 Resources
Publicly accessible
Improved Rare Earth Element Sorption from Simulated Geothermal Brines: Effect of Gassed versus Degassed Brines
A study exploring sorption and stripping characteristics of sorption media when simulated geothermal brines are degassed or not degassed. Experiments were done at 70degC. The brines used in this study were formulated by Tusaar. The two brines used/simulated are labeled 1M and 1C...
Tusaar Corp.
May 24, 2016
2 Resources
Publicly accessible
2 Resources
Publicly accessible
Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems
This is a final technical report for the project: Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems (EGS). The goal is to demonstrate the feasibility of foam fracturing in EGS applications. The project, led by Oak Ridge National Laboratory (ORNL), wa...
Wang, H. et al Oak Ridge National Laboratory
May 17, 2022
3 Resources
Curated
3 Resources
Curated
REE Adsorption Performance with Immobilized Caulobacter Biofilms
This submission includes data collected from experiments on the performance of rare earth adsorption by immobilized bacteria that accompany the FY18 Q2 and Q3 quarter reports. Relevant information from these reports is included in a resource below. The spreadsheet below includes d...
Jiao, Y. and Park, D. Lawrence Livermore National Laboratory
Apr 01, 2018
2 Resources
Publicly accessible
2 Resources
Publicly accessible
Data of flow loop tests
Rheology Screening for Mud Additives
The rheology screening experiments aimed to evaluate the performance of different additives to be used as viscosifier for the base fluid. Different fluid formulations were prepared in the lab by adding the additives individually to tap water in...
Salehi, S. University of Oklahoma
Jan 04, 2023
4 Resources
Awaiting curation
4 Resources
Awaiting curation
Recovery of Rare Earth Elements from Geothermal Fluids through Bacterial Cell Surface Adsorption
We summarized the FY17 and part of FY18 results of the analysis of the effect of several parameters (e.g., total dissolved solids, specific competing metals, pH, and temperature) on REE recovery from geothermal brine in a manuscript that was submitted to Environmental Science & Te...
Jiao, Y. et al Lawrence Livermore National Laboratory
Jan 01, 2018
2 Resources
Publicly accessible
2 Resources
Publicly accessible
Utah FORGE Hydrothermal Friction-Hydraulic Transmissivity Laboratory Experiments
Submission includes data from laboratory slide-hold-slide tests, combined with flow through tests, conducted on Westerly granite with 30 degree sawcut. Tests were conducted with a constant confining pressure of 30 MPa with an average pore pressure of 10 MPa at temperatures of 23 a...
Jeppson, T. and Lockner, D. U.S. Geological Survey
Feb 24, 2022
1 Resources
Curated
1 Resources
Curated
Chemical, Calcium Phosphate Cements for Geothermal Wells Corrosion Protection, Bond Strength and Matrix Self-Healing
The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and potential), bond and matrix strength, as well as matrix strength recovery after impos...
Sugama, T. Brookhaven National Laboratory
Sep 26, 2017
2 Resources
Publicly accessible
2 Resources
Publicly accessible
Machine Learning to Identify Geologic Factors Associated with Production in Geothermal Fields: A Case-Study Using 3D Geologic Data from Brady Geothermal Field and NMFk
In this paper, we present an analysis using unsupervised machine learning (ML) to identify the key geologic factors that contribute to the geothermal production in Brady geothermal field. Brady is a hydrothermal system in northwestern Nevada that supports both electricity producti...
Siler, D. et al United States Geological Survey
Oct 01, 2021
6 Resources
Curated
6 Resources
Curated