Search GDR Data

Utah FORGE: Seismic and Other Shapefiles from the Roosevelt Hot Springs Area

Three shapefiles in this submission show the position of proposed seismic line surveys. The mid-crustal velocity anomaly file shows the extent of an anomalously low P-wave velocity zone in the subsurface. Two other files show the extent of known hydrothermal systems in the Rooseve...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 22, 2016
7 Resources
0 Stars
Publicly accessible

Utah FORGE: Earth Model Mesh Data for Selected Surfaces

This submission contains a number of data files with vertices of meshed/interpolated surfaces used in the Phase 2B earth model. Examples include land surface (based on 10-meter DEM), the granitoid-basin fill contact, several faults, and also interpolated temperature isosurfaces f...

Podgorney, R. Idaho National Laboratory

Dec 07, 2018
6 Resources
0 Stars
Publicly accessible

US Low-Temperature EGS Resource Potential Estimate

Shapefile of shallow, low-temperature EGS resources for the United States, and accompanying paper (submitted to GRC 2016) describing the methodology and analysis. These data are part of a very rough estimate created for use in the U.S. Department of Energy Geothermal Technology O...

Mullane, M. et al National Renewable Energy Laboratory

Jun 30, 2016
2 Resources
0 Stars
Publicly accessible

Low-Temperature Hydrothermal Resource Potential Estimate

Compilation of data (spreadsheet and shapefiles) for several low-temperature resource types, including isolated springs and wells, delineated area convection systems, sedimentary basins and coastal plains sedimentary systems. For each system, we include estimates of the accessible...

Mullane, M. et al National Renewable Energy Laboratory

Jun 30, 2016
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Roosevelt Hot Springs Analytical Well-Based Temperature Model Data

This submission contains a cumulative record of one-dimensional temperature modeling based off of well data in the vicinity of the Utah FORGE site. Temperature log data from wells used, and in some cases were extrapolated below the bottom of a number of wells. The data were corre...

Podgorney, R. and Allis, R. Idaho National Laboratory

Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

2013 YTD Dixie Valley Binary Cycle Production Data

Sensor data proving the technical and economic feasibility of utilizing the available unused heat to generate additional electric power from a binary power plant from the low-temperature brine at the Dixie Valley Geothermal Power Plant. Monthly data for Jan 2013 October 7 2013

Lee, V. Terra-Gen Sierra Holdings, LLC

Aug 07, 2013
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Stimulation Conference Paper and Data

The U.S. Department of Energy's (U.S. DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is a field laboratory that provides a unique opportunity to develop and test new technologies for characterizing, creating and sustaining Enhanced Geothermal Systems (EGS) in ...

Best, S. Energy and Geoscience Institute at the University of Utah

Apr 24, 2019
2 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Temperature-Depth Estimates for West Virginia University, Morgantown, WV

This dataset contains data spreadsheets and figures that summarize the results of a stochastic analysis of temperatures at depth below the West Virginia University campus in Morgantown, WV. These results are extracted from a study by Smith (2019), whose results are included in a G...

Smith, J. West Virginia University

Dec 19, 2019
3 Resources
0 Stars
Publicly accessible

Fallon FORGE: 3D Geologic Model

The 3D geologic model for the Fallon for site was constructed in EarthVision software using methods similar to (Moeck et al., 2009, 2010; Faulds et al., 2010b; Jolie et al., 2012, 2015; Hinz et al., 2013a; Siler and Faulds, 2013; Siler et al., 2016a, b) References are included in ...

Blankenship, D. and Siler, D. Sandia National Laboratories

Mar 01, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Geologic, Topographic, and Other Related Maps and GIS Data from the Earth Model

This submission contains a number of maps and shapefiles related to the Utah FORGE site. Examples include geologic maps (several variations) and GIS data for the Utah FORGE site outline. All data are georeferenced to UTM, zone 12N, NAD 83, NAVD 88.

Podgorney, R. et al Idaho National Laboratory

Dec 07, 2018
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32/Well16B(78)-32 Circulation Test Data

This dataset encompasses the collected data and associated reports from the low-rate injection circulation test conducted on wells 16A(78)-32 and 16B(78)-32 in July 2023 at Utah FORGE. It includes comprehensive raw circulation data, captured by Pason and Schlumberger (SLB). The da...

Mclennan, J. and Xing, P. Energy and Geoscience Institute at the University of Utah

Jul 19, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Ground Water Level Monitoring Data

Groundwater data around the Utah FORGE site has been collected to determine the piezometric levels and compositional variability. Field measurements in 2020 are designed to obtain and survey new groundwater wells that have been drilled on the distal periphery of the Utah FORGE pro...

Kirby, S. Utah Geological Survey

Sep 30, 2020
1 Resources
0 Stars
Curated

Three Dimensional Thermal Model of Newberry Volcano, Oregon

Final results of a 3D finite difference thermal model of Newberry Volcano, Oregon. Model data are formatted as a text file with four data columns (X, Y, Z, T). X and Y coordinates are in UTM (NAD83 Zone 10N), Z is elevation from mean sea level (meters), T is temperature in deg C. ...

Frone, Z. and Cladouhos, T. AltaRock Energy Inc

Jan 30, 2015
3 Resources
0 Stars
Publicly accessible

Utah FORGE: TEM and Gravity Data

This submission includes a gravity data in text format and as a GIS point shapefile and transient electromagnetic (TEM) raw data. Each text file additionally contains location data (UTM Zone 12, NAD83) and elevation (meters) data for that station. The gravity data shapefile was i...

Hardwick, C. and Nash, G. Energy and Geoscience Institute at the University of Utah

Feb 05, 2018
3 Resources
0 Stars
Publicly accessible

AASG Wells Data for the EGS Test Site Planning and Analysis Task

AASG Wells Data for the EGS Test Site Planning and Analysis Task Temperature measurement data obtained from boreholes for the Association of American State Geologists (AASG) geothermal data project. Typically bottomhole temperatures are recorded from log headers, and this informat...

Augustine, C. National Renewable Energy Laboratory

Oct 09, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone

Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...

Um, E. et al Lawrence Berkeley National Laboratory

Feb 06, 2023
4 Resources
0 Stars
Curated

A Conceptual Geologic Model for the Newberry Volcano EGS Site in Central Oregon: Constraining Heat Capacity and Permeability through Interpretation of Multicomponent Geosystems Data

Newberry Volcano, a voluminous (500 km3) basaltic/andesitic/rhyolitic shield volcano located near the intersection of the Cascade volcanic arc, the Oregon High Lava Plains and Brothers Fault Zone, and the northern Basin and Range Province, has been the site of geothermal explorati...

Mark-Moser, M. et al National Energy Technology Laboratory

Feb 22, 2016
1 Resources
0 Stars
Publicly accessible

DEEPEN: Final 3D PFA Favorability Models and 2D Favorability Maps at Newberry Volcano

Part of the DEEPEN (DE-risking Exploration of geothermal Plays in magmatic ENvironments) project involved developing and testing a methodology for a 3D play fairway analysis (PFA) for multiple play types (conventional hydrothermal, superhot EGS, and supercritical). This was tested...

Taverna, N. et al National Renewable Energy Laboratory

Jan 24, 2024
14 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Curated

Utah FORGE 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone

This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE site. Boreholes will be electrically energized and will serve as data sources for future proposed electromagnetic bore...

Um, E. et al Lawrence Berkeley National Laboratory

Nov 15, 2022
4 Resources
0 Stars
Curated

Utah FORGE: Area LiDAR Bare Earth DEM Mosaic

This is a mosaic of 154 bare earth DEM panels (0.5 m resolution) acquired during Phase II of the Utah FORGE project. The DEM covers the western Mineral Mountains and adjoining basin including the Roosevelt Hot Springs area. The coordinates are in UTM Zone 12, NAD 83 and elevation ...

Nash, G. Energy and Geoscience Institute at the University of Utah

Aug 07, 2018
1 Resources
0 Stars
Publicly accessible

Development of a Downhole Tool Measuring Real-Time Concentration of Ionic Tracers and pH in Geothermal Reservoirs

For enhanced or Engineered Geothermal Systems (EGS) geothermal brine is pumped to the surface via the production wells, the heat extracted to turn a turbine to generate electricity, and the spent brine re-injected via injection wells back underground. If designed properly, the sub...

Hess, R. et al Sandia National Laboratories

Mar 31, 2014
1 Resources
0 Stars
Curated

A Thermal-Hydrological-Chemical Model for the EGS Demonstration Project at Newberry Volcano, OR

Newberry Volcano in Central Oregon is the site of a Department of Energy funded Enhanced Geothermal System (EGS) Demonstration Project. Stimulation and production of an EGS is a strong perturbation to the physical and chemical environment, giving rise to coupled Thermal-Hydrologic...

Sonnenthal, E. et al National Energy Technology Laboratory

Jan 30, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Stimulation Data (April, 2022)

This is a set of data related to the stimulation program at Utah FORGE well 16A(78)-32 during April, 2022. This includes daily reports, 1 second Pason data, tracer data, and shear stimulation data and information including a report of an evolving prognosis for the stimulation oper...

McLennan, J. Energy and Geoscience Institute at the University of Utah

May 18, 2022
11 Resources
0 Stars
Curated

Modeling Responses of Naturally Fractured Geothermal Reservoir to Low-Pressure Stimulation

Hydraulic shearing is an appealing reservoir stimulation strategy for Enhanced Geothermal Systems. It is believed that hydro-shearing is likely to simulate a fracture network that covers a relatively large volume of the reservoir whereas hydro-fracturing tends to create a small nu...

Fu, P. and Carrigan, C. Lawrence Livermore National Laboratory

Jan 01, 2012
2 Resources
0 Stars
Publicly accessible

1 2 3 4 5 Next >>