Search GDR Data
Showing results 1 - 25 of 64.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
Grid-scale energy storage has been identified as a needed technology to support the continued build-out of intermittent renewable energy resources. As of April 2017, the U.S. had approximately 24.2 GW of energy storage on line, compared to 1,081 GW of installed generation capacity...
This dataset contains all the inputs used and output produced from Matlab for the environmental analysis of an improved hybrid geothermal district heating and cooling (GDHC) system with a heat pump, without a heat pump, and for a hot water GDHC. Detailed descriptions of the conten...
The report details a thermal circulation test at Red Raider #2 at the Oil Field Technology Center (OTC) involving staged hot water injections and distributed temperature sensing (DTS) fiber optic measurements. It includes experimental setup, fluid flow and temperature data, therm...
This dataset provides a set of experimental data on the performance of lost circulation materials (LCMs) used in geothermal drilling operations. It includes results from four distinct tests: thermal degradation, viscosity measurements, compression tests, and high-temperature flow ...
This report is the third in a series of reports sponsored by the U.S. Department of Energy Geothermal Technologies Program in which a range of water-related issues surrounding geothermal power production are evaluated. The first report made an initial attempt at quantifying the li...
These data and test descriptions are from a set of primarily tensile hydraulic-fracture stimulations in wells E2-TC and E2-TU and a subsequent chilled water circulation test conducted by injecting in well E2-TU on the 4100 level of the Sandford Underground Research Facility (SURF)...
This report provides a first-order assessment of the producible energy from the Utah FORGE EGS reservoir, based on stimulation and circulation testing in 2024. The assessment is based on a stored heat calculation for a cylindrical volume of stimulated hot dry rock enveloping the d...
Plugging of fracture porosity from mineral precipitation due to injecting cold water into a a geothermal reservoir can impact the overall permeability of the fracture network in the reservoir. This can have serious ramifications on the efficiency of the geothermal resource. Geoche...
This submission contains the presentation slides and recordings from the first 98 EGS Collab Modeling and Simulation Working Group teleconferences. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field activities and resul...
Includes data for measured inert tracer breakthrough curves first reported in Hawkins (2020) (Water Resources Research). In addition, this submission includes the production well temperature measurements first reported in Hawkins et al. (2017a) (Water Resources Research, volume 53...
This folder contains the GEOPHIRES codes and input files for running the base case scenarios for the six deep direct-use (DDU) projects. The six DDU projects took place during 2017-2020 and were funded by the U.S. Department of Energy Geothermal Technologies Office. They investiga...
This dataset contains processed Neubrex Distributed Temperature Sensing data acquired in well 16B(78)-32 at the Utah FORGE site during August 2025 field operations. The data were collected during cross-well circulation testing from well 16A to well 16B and subsequent huff-and-puff...
Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy.
Objective and Purpose:
Develop a multistage hydraulic stimulation approach designed specifically to target the top three factors that control the technical and commercial viability of an EGS sys...
This submission includes processed and reduced data for circulation testing that was conducted at the 164' fracture on the 4850 ft level of the Sanford Underground Research Facility. The circulation tests were done to test the flow through the 164' fracture in the EGS Collab Exper...
The Newberry Volcano EGS Demonstration in central Oregon, a 5 year project begun in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry well (NWG 55-29) drilled in 2008. First, the stimulation pumps used were designed to ru...
Geothermal power plants typically show decreasing heat and power production rates over time. Mitigation strategies include optimizing the management of existing wells increasing or decreasing the fluid flow rates across the wells and drilling new wells at appropriate locations. Th...
This dataset contains the final technical report and closeout presentation for Utah FORGE Project 4-2492, which investigated advanced stimulation design and diagnostic approaches to improve fracture uniformity, inter-well connectivity, and energy recovery efficiency in enhanced ge...
This dataset contains tracer test results from stimulation and circulation experiments conducted on the Utah FORGE wells 16A(78)-32 and 16B(78)-32 during 2024. The data was collected by RESMAN Energy Technology and includes detailed tracer analysis from flowback, short and extende...
Included here are two fiber optics monitoring reports on Utah FORGE well 16B(78)-32 from Neubrex Energy Services. These reports review the fiber optics monitoring during both the cementing and circulation test periods of the well. Cementing as well as post-cementing monitoring a...
This dataset contains a microseismic event catalog acquired during the Frisco pad flow test project led by Fervo Energy, conducted between July 17th Sept 5th 2024, near the Utah FORGE geothermal site. The microseismic events are located using data collected from various Utah FORGE...
This dataset includes Neubrex Energy Services fiber optic distributed temperature sensing (DTS) data from well 16B(78)-32 during stimulation and circulation, including interaction with well 16A(78)-32, during April and May 2024. The DTS data are stored in HDF5 file format and are ...
This is a PDF format summary report regarding the performance of a packer, which failed, and bridge plug used during the injection program in Utah FORGE deep Well 58-32, April and May, 2019.
These are the daily reports created during and around the August 2024 circulation test done on wells 16A(78)-32 and 16B(78)-32 at the Utah FORGE site. Information about the rig activity during this period includes details on rig up, depths, pumping, water temperature, safety, and ...
Attached is 5 datasets collected from Fallon FORGE well 21-31 located in Churchill County, Nevada collected and interpreted between Feburary 2018-January 2020. This submission includes 1) new lithology interpretation derived from petrographic thin sections of sidewall cores taken ...
This zip file contains reports discussing the use of fiber optics during well 16B(78)-32 stimulation and circulation tests in the summer of 2024. The reports cover the collection of strain rate and temperature change data during these well events. Theory, methods, and initial dat...
Google Map