Search GDR Data
Showing results 126 - 150 of 155.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
This archive contains a GIS point feature shapefile that shows the locations of wells in the general region of the Utah FORGE project, near Roosevelt Hot Springs. This includes Utah FORGE deep well 58-32 and wells for which data has been uploaded to the Geothermal Data Repository....
This link leads to the University of Utah Seismograph Stations website Utah FORGE seismograph stations page. This page contains a location map and description of the Utah FORGE seismograph stations and other related information. Additionally, data can be downloaded for each statio...
This 2024 annual report for Phase 3B Year 2 at Utah FORGE provides an in-depth account of activities and advancements made at the site. Key achievements include drilling and stimulating the production well 16B(78)-32, creating a geothermal reservoir, and achieving commercial-scale...
This dataset contains results from nine triaxial direct shear tests conducted by Los Alamos National Laboratory on samples from FORGE Well 16A(78)-32. The primary objectives of this work were to determine the shear strength in both intact and residual states, evaluate dilation aga...
This is data from and a final report on the development of a 3D velocity model for the larger FORGE area and on the seismic resolution in the stimulated fracture volume at the bottom of well 16A-32. The velocity model was developed using RMS velocities of the seismic reflection su...
This dataset includes reports and a slide presentation on discrete fracture network (DFN) generation and hydraulic fracture modeling at the Utah FORGE site. It details the characterization of natural fractures using well log and core data, as well as stochastic modeling techniques...
This submittal includes the field-test data collected during stress tests conducted in the Utah FORGE 16B(78)-32 wellbore to measure/characterize the stresses in the geothermal reservoir. The type of stress test performed is referred to as a mini-frac test or a micro-frac test. Th...
This report documents the use of fiber optic Rayleigh frequency shift (RFS) Distributed Strain Sensing (DSS), Distributed Temperature Sensing (DTS), and microseismic data recorded during the hydraulic fracture stimulation of well 16A(78)-32, as detected in the offset well 16B(78)-...
The report outlines the updated Traffic Light System (TLS) for the Utah FORGE project, which aims to mitigate seismic risks associated with Enhanced Geothermal Systems (EGS) operations. It integrates lessons from past operations, including stimulation and circulation experiments a...
This dataset contains microseismic event data collected by Geo-Energie Suisse during circulation testing of wells 16A(78)-32 and 16B(78)-32 at the Utah FORGE site in August and September 2024. The data were recorded using a local monitoring network and include key event parameters...
This dataset contains distributed acoustic sensing (DAS) microseismic event triggers (waveforms) recorded during the 16A-16B circulation tests conducted at the Utah FORGE site in July 2023 as part of the FOGMORE R&D project (Utah FORGE Project 3-2417). Data were acquired using Sil...
This report provides insights into Utah FORGE well 58-32's hydraulic fractures. It utilizes both electrical borehole scans from Schlumberger's Formation Micro-scanner Image tool (FMI) and Stoneley waves from a borehole sonic tool. These methods are combined in a comprehensive work...
This dataset contains high-pressure ultrasonic measurements on a foliated granitoid core from Well 16B(78)-32 at the Utah FORGE site. Ultrasonic P-waves and two orthogonal S-waves were measured concurrently parallel and perpendicular to the rock fabric. All measurements were mad...
This submission includes a methods report and an accompanying Excel dataset documenting temperature-dependent Mode-I fracture toughness (KIC) measurements for Utah FORGE granite obtained using semi-circular bending (SCB) tests in accordance with the ISRM Suggested Method. Testing ...
This archive provides a a link to a microseismic event catalog of the 2024 stimulations at Utah FORGE. The catalog was derived from data collected with the surface monitoring network consisting of 5 permanent seismic stations deployed by the University of Utah Seismograph Station...
This report documents the post-hydraulic fracturing extended circulation test between Utah FORGE wells 16A and 16B conducted in August 2024. In well 16B, fiber optic measurements of Rayleigh frequency shift distributed strain sensing (RFS-DSS) and distributed temperature sensing ...
This dataset includes Rayleigh Frequency Shift (RFS) Distributed Strain Sensing (DSS) cumulative strain change and change rate data. The data was acquired during the stimulation of Utah FORGE Well 16A(78)-32 in April 2024 via fiber installed in Well 16B(78)-32. The fiber optic da...
This report reviews the training of machine learning algorithms to laboratory triaxial ultrasonic velocity data for Utah FORGE Well 16A(78)-32. Three machine learning (ML) predictive models were developed for the prediction of vertical and two orthogonally oriented horizontal str...
This dataset contains distributed acoustic sensing (DAS) microseismic event triggers (raw waveforms) recorded during the 16A-16B stimulations conducted at the Utah FORGE site in April 2024. The dataset consists of raw waveform data provided in nanostrain rate units, accompanied by...
The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 1...
This is an overview presentation of the Utah FORGE project given by Joseph Moore, Ph.D., at the 2019 American Rock Mechanics Associate meeting. It details the state of the Utah FORGE project at on 8/17/2019.
This report discusses the objectives, goals, accomplishments and results of Phase 3B Year 1 of the Utah FORGE project. The report includes infrastructure, seismic monitoring, modelling, external R&D, communications and outreach, data produced, lessons learned, conclusions, and pla...
This archive contains a report on the Mineral Mountains West fault system as part of phase 2C and the evidence for the northern terminus of this structure. Geologic field mapping, reprocessing of 3D seismic reflection data, and soil gas surveys contributed to this effort.
This submission contains a report and associated data from triaxial direct shear tests conducted by Los Alamos National Laboratory. The samples used were sourced from 16A(78)-32 well core. The primary objectives of this test were to determine the shear strength in both intact an...
This package contains triggered 3-component surface nodal seismic waveforms recorded during the FOAL 1 experiment, or FORGE Observation Array Linear #1, which occurred during the April 2022 hydraulic stimulation of well 16A(78)-32 at the Utah FORGE EGS site. This data was utilized...
Google Map