Search GDR Data
Showing results 1 - 25 of 157.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
Included here is Sanvean Technologies bit sensor data amalgamated with data from National Oilwell Varco's (NOV) BlackBox tool for Reed Hycalog bits used during drilling of Well 16B(78)-32. The dataset contains information collected at the bit while drilling including rate of penet...
This dataset consists of drilling data (Pason data spreadsheets, daily reports, days v. depth, mud logs), Schlumberger logs (FMI, shear anisotropy analysis, memory, sonic, array induction/spectral density/dual spaced neutron/gamma ray/caliper, spectral GR/temperature, and Gardner ...
This dataset contains all well logs from Utah FORGE well 16A(78)-32. This includes the mud log, Sanvean Technologies logs, and Schlumberger logs. Please see the file descriptions below for information about each log.
These reports review Fervo Energy's construction of a commercial enhanced geothermal system (EGS). Fervo has qualified full functionality of the system through production testing at commercially relevant operating conditions. The project site is located in a nearfield setting ad...
This regards a high-resolution DAS microseismic dataset produced by Silixa from Utah FORGE Phase 2C seismic monitoring well 78-32 during stimulation testing of well 58-32. It is a very large dataset and as such it is currently not directly available on GDR. However, it is availabl...
Three shapefiles in this submission show the position of proposed seismic line surveys. The mid-crustal velocity anomaly file shows the extent of an anomalously low P-wave velocity zone in the subsurface. Two other files show the extent of known hydrothermal systems in the Rooseve...
This drilling data for Utah FORGE well 16B(78)-32 include a well survey, core summary, mud and mud temperature logs, daily reports of the drilling process, and additional data from the Pason oil and gas company. Well 16B(78)-32 serves as the production well for reservoir creation...
This submission includes geophone data collected by Schlumberger from Utah FORGE Phase 2C seismic monitoring well 78-32 during stimulation testing of well 58-32. The data are hosted by the Center for High Performance Computing (CHPC) at the University of Utah, and a script for dow...
This dataset includes geological and geophysical well log data from the Gold 6-IB well at the Cape EGS site in Utah, collected between January and April 2025. The data span the full well depth from surface to total depth (15,054 feet) and encompass mud log information, mass spectr...
This submission contains the following data associated with Utah FORGE Phase 2C within the Roosevelt Hot Springs geothermal area:
An ArcGIS shapefile with well locations for wells 58-32, 78-32, 68-32, OH-3, OH-4, WOW-2, and WOW-3. Well 58-32 is the deep test well, wells 68-32 an...
Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. This dataset includes both ...
This dataset contains logs and summaries from the Gold 2-IB well at the Cape EGS site near Utah FORGE, collected during operations in fall 2024. The dataset includes a mass spectrometry log, mudlog, measurement while drilling (MWD) data, and daily geology summaries. The mass spect...
Data, logs, and graphics associated with the drilling and testing of Utah FORGE deep test well 58-32 (MU-ESW1) near Roosevelt Hot Springs.
This submission includes digitalized versions of the following:
McCulloch Geothermal Corp Acord 1-26 Cover Letter
McCulloch Geothermal Corp Acord 1-26 Drilling Plan
McCulloch Geothermal Corp Acord 1-26 Bond Documents
Division of Water Rights Permission to Drill
Drillers Log
Geot...
This document provides a pre-drill prognosis for the Gold 2-P well at Fervo's Cape Project site, highlighting temperature and lithology projections. Elements include well trajectory schematics, a temperature-depth profile, and geologic cross sections. The temperature is estimated...
This data set includes the daily drilling reports and Pason data for well 78B-32 and Schlumberger logs acquired after drilling completion. This well was drilled between June 27th and July 31st of 2021. Also included is raw and processed data for a variety of well data metrics incl...
This dataset includes survey data, drilling data, daily reports, summaries of daily operations, and rig photos from the drilling of Utah FORGE well 16A(78)-32, which is a highly deviated deep well. It was completed 60 days ahead of schedule.
Rig move in began 10/22/2020 and dril...
This dataset contains the final technical report and closeout presentation for the project A Strain Sensing Array to Characterize Deformation at the Utah FORGE Site, carried out from 2021 to 2025 by Clemson University in collaboration with the U.S. Geological Survey and UNAVCO. Th...
This dataset consists of Baker Hughes Pressure-Temperature gauge readings on fiber optics in Utah FORGE Well 16B(78)-32. This gauge is at a measured depth of 7,056.67 feet. The true vertical depth can be determined from the well survey data, which is linked below. The data consis...
This dataset contains the final technical report for the project Zonal Isolation Solution for Geothermal Wells, carried out from 2021 to 2024 by PetroQuip and the University of Utah. It documents the design, testing, and deployment of two downhole isolation tools for high-temperat...
This is a presentation on the Geothermal Multiset Straddle (GMS) for High Temperature Applications by Welltec, presented by Ricardo Vasques. This video slide presentation discusses the development of (1) an annular multiset isolation system; (2) a stimulation straddle isolation sy...
This is a presentation on Designing, Characterizing & Optimizing Proppant & Flow Monitoring Materials for a Utah FORGE Engineered Geothermal System by Oklahoma State University, presented by Dr. Mileva Radonjic. This video slide presentation discusses enhanced proppant coatings, z...
This is a presentation on the Geothermal Multiset Straddle (GMS) for High Temperature Applications by Welltec, presented by Ricardo Vasques. This video slide presentation discusses the development of (1) an annular multiset isolation system; (2) a stimulation straddle isolation sy...
This dataset contains the final technical report and closeout presentation for Utah FORGE Project 4-2541, which focused on the optimization and validation of a multistage plug and perf stimulation treatment design for enhanced geothermal systems. The report documents drilling, com...
This is a presentation on High-Temperature Testing of Proppants for EGS and Simulation of Electromagnetic Fracture Mapping Using Electrically-Conductive Proppants by Stevens Institute of Technology, presented by Dr. Cheng Chen. This video slide presentation describes laboratory te...
Google Map