Search GDR Data

Seismic Analysis of Spatio-Temporal Fracture Generation During EGS Resource Development Full Moment Tensors and Stress Inversion Catalogs

This submission contains 167 full moment tensor (MT) solutions for the seismicity observed two years prior and three years post start of injection activities. Also included are the azimuth and plunge angles for the three main stress directions sigma1, sigma 2 and sigma 3 at the P...

Gritto, R. et al Array Information Technology

Sep 26, 2018
2 Resources
0 Stars
Publicly accessible

Laboratory Evaluation of EGS Shear Stimulation-Test 001

This is the results of an initial setup-shakedon test in order to develop the plumbing system for this test design. a cylinder of granite with offset holes was jacketed and subjected to confining pressure and low temperature (85C) and pore water pressure. Flow through the sample w...

Bauer, S. Sandia National Laboratories

Jul 29, 2014
1 Resources
0 Stars
Publicly accessible

Fallon FORGE: Lithology Logs and Well 21-31 Drilling Data

This submission includes lithology logs for all Fallon FORGE area wells; determined from core, cuttings, and thin section. Wells included are 84-31, 21-31, 82-36, FOH-3D, 62-36, 18-5, 88-24, 86-25, FOH-2, 14-36, 17-16, 34-33, 35A-11, 51A-20, 62-15, 72-7, 86-15, Carson_Strat_1_36-3...

Blankenship, D. et al Sandia National Laboratories

Mar 11, 2018
2 Resources
0 Stars
Publicly accessible

WHOLESCALE: Coordinates of wells at San Emidio, Nevada

This dataset includes position coordinates and elevation information for wells at the WHOLESCALE San Emidio project location. Well positions in the attached file are characterized by UTM coordinates (Easting, Northing) in meters, and WHOLESCALE coordinates (Easting, Northing) rel...

Cardiff, M. et al University of Wisconsin Madison

Sep 25, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2615: Laboratory Data for Insights on Hydraulic Fracture Closure and Stress Measurement

This dataset includes data from injection/fall-off experiments conducted in controlled laboratory settings. The aim is to investigate the physics governing fracture closure and the associated stress measurements during hydraulic fracturing. These time series data include flow rat...

Ye, Z. and Ghassemi, A. The University of Oklahoma

Jun 12, 2024
5 Resources
0 Stars
Curated

Directional Cooling-Induced Fracturing: Directional Cooling Data Under True-Triaxial Stress State

Data includes Directional Cooling-Induced Fracturing (DCIF) testing data using westerly granite blocks. This submission includes data from two samples of westerly granite, lab sample 7 and 8. Files contain stress, temperature and acoustic emission data acquired during polyaxial, l...

Trzeciak, M. University of Wisconsin Madison

Jul 01, 2022
8 Resources
0 Stars
Curated

DCIF (Directional Cooling-Induced Fracturing) Westerly Granite AE Borehole Damage Effect Test (Task 3-0)

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on three rectangular Westerly granite blocks (width=depth=4.0", height=2.0") which were preheated to 200, 400, and 600 degree C to induce damage (microcracks) with varying degrees. Liquid nitrogen was poured...

Nakagawa, S. Lawrence Berkeley National Laboratory

Jan 27, 2022
13 Resources
0 Stars
Publicly accessible

Illite Dissolution Rates and Equation (100 to 280 deg C)

The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and temperature conditions representative of subsurface conditions in natural and/or engineered geothermal reservoirs. Usi...

Carroll, S. Lawrence Livermore National Laboratory

Oct 17, 2014
1 Resources
0 Stars
Publicly accessible

DCIF Westerly Granite AE Stress Effect Test (Task 3-1)

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on rectangular Westerly granite blocks (width=depth=4.0", height=2.0"). Liquid nitrogen was poured in a small, 1"-diameter copper cup attached to the top of the sample, and the resulting acoustic emissions (A...

Nakagawa, S. and Trzeciak, M. Lawrence Berkeley National Laboratory

Jul 08, 2021
15 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2615: Well 58-32 and 78-32 Poroelastic Properties

Lab data on permeability, grain bulk modulus, drained bulk modulus, Skempton's pore pressure coefficient, and Biot's effective stress coefficient for Utah Forge Well 58-32 and Well 78-32. Work done as part of project number 5-2615 by the University of Oklahoma.

Ghassemi, A. and Zhou, X. University of Oklahoma

Oct 31, 2022
2 Resources
0 Stars
Publicly accessible

Chlorite, Biotite, Illite, Muscovite and Feldspar Dissolution Kinetics at Variable pH and Temperatures up to 280 deg C

Chemical reactions pose an important but poorly understood threat to EGS long-term success because of their impact on fracture permeability. This report summarizes the dissolution rate equations for layered silicates where data were lacking for geothermal systems. Here we report ...

Carroll, S. et al Lawrence Livermore National Laboratory

Feb 24, 2017
2 Resources
0 Stars
Publicly accessible

Chlorite Dissolution Rates From 25 to 275 degrees and pH 3 to 10

We have calculated a chlorite dissolution rate equation at far from equilibrium conditions by combining new data (20 experiments at high temperature) with previously published data Smith et al. 2013 and Lowson et al. 2007. All rate data (from the 127 experiments) are tabulated in...

Lawrence Livermore National Laboratory

Sep 27, 2013
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Logs

This dataset contains all well logs from Utah FORGE well 16A(78)-32. This includes the mud log, Sanvean Technologies logs, and Schlumberger logs. Please see the file descriptions below for information about each log.

Gilmour, B. et al Energy and Geoscience Institute at the University of Utah

Mar 08, 2021
7 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Schlumberger FMI Logs DLIS and XML files

This zipped data set includes Schlumberger FMI logs DLIS and XML files from Utah FORGE deep well 58-32. These include runs 1 (2226-7550 ft) and 2 (7440-7550 ft). Run 3 (7390-7527ft) was acquired during phase 2C.

Nash, G. and Moore, J. Energy and Geoscience Institute at the University of Utah

Nov 17, 2017
4 Resources
0 Stars
Publicly accessible

Literature Data on Foam Fracturing Fluid

At the beginning of this project, the Temple team spent significant effort to collect data relevant to foam fracturing. More than 40 articles/reports were found in the open literature that reported the properties of aqueous foams under various testing conditions. The foam properti...

Thakor, V. et al Temple University

Nov 08, 2021
2 Resources
0 Stars
Publicly accessible

Hydroshear Simulation Lab Test 2, Additional Data Sheets

This file contains additional data for this test (hydroshear test 3.2). In this test a sample of granite with a pre-cut (man made fracture) is confined, heated and differential stress is applied. The max temperature in this this system development test is 95C. More test details ca...

Bauer, S. Sandia National Laboratories

Aug 01, 2014
2 Resources
0 Stars
Publicly accessible

Snake River Plain FORGE: Well Data for WO-2

Well data for the WO-2 well located in eastern Snake River Plain, Idaho. This data collection includes lithology reports, borehole logs, temperature at depth data, neutron density and gamma data, and rock strength parameters for the WO-2 well. This collection of data has been ass...

Podgorney, R. Idaho National Laboratory

Jul 29, 1991
9 Resources
0 Stars
Publicly accessible

Hawaii Play Fairway Analysis: Lanai Resistivity and Density 3D Inversion Models

To prepare for its third phase, the Hawaii Play Fairway project conducted groundwater sampling and analyses in ten locations in the Hawaiian islands, magnetotelluric (MT) and gravity surveys, as well as calculations of 3D subsurface stress due to the weight of the rock underlying ...

Lautze, N. et al University of Hawaii

Jun 01, 2020
3 Resources
0 Stars
Publicly accessible

Effective Elastic and Neutron Capture Cross Section Calculations Corresponding to Simulated Fluid Properties from CO2 Push-Pull Simulations

The submission contains a .xls files consisting of 10 excel sheets, which contain combined list of pressure, saturation, salinity, temperature profiles from the simulation of CO2 push-pull using Brady reservoir model and the corresponding effective compressional and shear velocity...

Chugunov, N. and Altundas, B. Lawrence Berkeley National Laboratory

Mar 07, 2018
1 Resources
0 Stars
Publicly accessible

Play Fairway Analysis CA-NV-OR: 2km Grid Based Analysis

Combined geochemical and geophysical data, weighted and ranked for geothermal prospect favorability.

M, C. University of California

Aug 20, 2015
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Milford Triaxial Test Data and Summary from EGI labs

Six samples were evaluated in unconfined and triaxial compression, their data are included in separate excel spreadsheets, and summarized in the word document. Three samples were plugged along the axis of the core (presumed to be nominally vertical) and three samples were plugged ...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 01, 2016
8 Resources
0 Stars
Publicly accessible

Risk Factor Analysis in Low-Temperature Geothermal Play Fairway Analysis for the Appalachian Basin (GPFA-AB)

This submission contains information used to compute the risk factors for the GPFA-AB project. The risk factors are natural reservoir quality, thermal resource quality, potential for induced seismicity, and utilization. The methods used to combine the risk factors included taking ...

E., T. Cornell University

Sep 30, 2015
191 Resources
0 Stars
Publicly accessible

Utah FORGE: Slide-Hold-Slide Experiments on Gneiss at Increased Temperature

Included are data from triaxial, single-inclined-fracture friction experiments. The experiments were performed with slide-hold-slide protocol on Utah FORGE gneiss at increased temperature. With a ~10 MPa normal stress, temperatures vary between experiments from room temperature u...

Eijsink, A. and Elsworth, D. Pennsylvania State University

Jul 25, 2023
24 Resources
0 Stars
Curated

Snake River Plain FORGE: Well Data for INEL-1

Well data for the INEL-1 well located in eastern Snake River Plain, Idaho. This data collection includes caliper logs, lithology reports, borehole logs, temperature at depth data, neutron density and gamma data, full color logs, fracture analysis, photos, and rock strength paramet...

Prestwich, S. and Bowman, J. Idaho National Laboratory

Mar 01, 1979
34 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 56-32 Drilling Data and Logs

This dataset consists of drilling data (Pason data spreadsheets, daily reports, days v. depth, mud logs), Schlumberger logs (FMI, shear anisotropy analysis, memory, sonic, array induction/spectral density/dual spaced neutron/gamma ray/caliper, spectral GR/temperature, and Gardner ...

Bristol, J. et al Energy and Geoscience Institute at the University of Utah

Mar 19, 2021
18 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 Next >>